H3C配置IRF实现网络设备堆叠

堆叠的概述

在此之前了解一下什么是堆叠，堆叠是指将多台交换机设备通过线缆连接后组合在一起，虚拟化成一台设备，是一种横向虚拟化技术。堆叠作为一种横向虚拟化技术，将多台设备在逻辑上虚拟成一台设备，可以简化网络的配置和管理。华三的虚拟化技术叫IRF，锐捷的虚拟化技术叫VSU，华为虚拟化技术叫iStack(盒式交换机)和CSS(框式交换机)，本文以H3C的IRF为实验进行配置。

H3C堆叠的配置

H3C官方配置文档：https://www.h3c.com/cn/d_202205/1609013_30005_0.htm
实验拓扑图：

H3C IRF配置思路

1. 准备两台交换机
2. 通过40G接口(Forty接口)直连交换机
3. 将主交换机接口编号为1备用交换机接口编号变更为2
4. 通过irf配置实现两台交换机逻辑上成为一台

IRF基础配置

Switch0配置

[H3C]sysname Switch0
[Switch0]irf member 1 priority 32
[Switch0]interface FortyGigE 1/0/53
[Switch0-FortyGigE1/0/53]shutdown
[Switch0-FortyGigE1/0/53]quit
[Switch0-irf-port1/1]port group interface FortyGigE 1/0/53
[Switch0]interface FortyGigE 1/0/53
[Switch0-FortyGigE1/0/53]undo shutdown
[Switch0]write force
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
[Switch0]irf-port-configuration active

Switch1配置

# 将switch系统编号修改成2
[Switch1]irf member 1 renumber 2
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
Please reboot the device for the new member ID to take effect.
[Switch1]quit
# 更改编号后保存并重启
<Switch1>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
This command will reboot the device. Continue? [Y/N]:y
# 将接口加入到堆叠端口
[Switch1]interface FortyGigE 2/0/53
[Switch1-FortyGigE2/0/53]shutdown 
[Switch1-FortyGigE2/0/53]quit
[Switch1]irf-port 2/1
[Switch1-irf-port2/1]irf-port 2/2
[Switch1-irf-port2/2]port group interface FortyGigE 2/0/53
You must perform the following tasks for a successful IRF setup: 
Save the configuration after completing IRF configuration. 
Execute the "irf-port-configuration active" command to activate the IRF ports. 
[Switch1-irf-port2/2]quit
[Switch1]interface FortyGigE 2/0/53
[Switch1-FortyGigE2/0/53]undo shutdown
#!!!一定要先执行保存
[Switch1-FortyGigE2/0/53]write force
#激活irf后，这台交换机将会自动重启
[Switch1]irf-port-configuration active

诊断命令

查看irf设备成员列表

<Switch0>dis irf
MemberID    Role    Priority  CPU-Mac         Description
  *1        Master  32        505e-4cd7-0104  ---
  +2        Standby 1         505e-4f4c-0204  ---
--------------------------------------------------
 * indicates the device is the master.
 + indicates the device through which the user logs in.

 The bridge MAC of the IRF is: 505e-4cd7-0100
 Auto upgrade                : yes
 Mac persistent              : 6 min
 Domain ID                   : 0
<Switch0>

查看irf链路信息

<Switch0>dis irf link
Member 1
 IRF Port  Interface                             Status
 1         FortyGigE1/0/53                       UP    
 2         disable                               --    
Member 2
 IRF Port  Interface                             Status
 1         disable                               --    
 2         FortyGigE2/0/53                       UP    
<Switch0>

查看irf拓扑情况

<Switch0>dis irf topology 
                              Topology Info
 -------------------------------------------------------------------------
               IRF-Port1                IRF-Port2          
 MemberID    Link       neighbor      Link       neighbor    Belong To
 2           DIS        ---           UP         1           505e-4cd7-0104
 1           UP         2             DIS        ---         505e-4cd7-0104