FSL - DualRegression

Source：http://fsl.fmrib.ox.ac.uk/fsl/fslwiki/DualRegression

Research Overview

A common need for analyses such as ICA for resting-state FMRI is to run a group-average ICA, and then, for each subject, estimate a "version" of each of the group-level spatial maps. Currently, the best way to do this is to use dual regression. This:

  • Regresses the group-spatial-maps into each subject's 4D dataset to give a set of timecourses (stage 1)
  • Regresses those timecourses into the same 4D dataset to get a subject-specific set of spatial maps (stage 2)

It is then common to compare the spatial maps across groups of subjects to look for group differences, ideally using randomise permutation testing.

 

 

Running Dual Regression

  • Run MELODIC on your group data in Concat-ICA mode ("Multi-session temporal concatenation"). Find the file containing the ICA spatial maps output by the group-ICA; this will be called something like melodic_IC.nii.gz and will be inside a something.ica MELODIC output directory.

  • Use Glm (or any other method) to create your multi-subject design matrix and contrast files (design.mat / design.con).

  • Run dual_regression. Just type the script name to get the usage - should be mostly self-explanatory:

    • The 4D group spatial IC maps file will be something like somewhere.ica/melodic_IC

    • The des_norm option determines whether to variance-normalise the timecourses created by stage 1 of the dual regression; it is these that are used as the regressors in stage 2. If you don't normalise them, then you will only test for RSN "shape" in your cross-subject testing. If you do normalise them, you are testing for RSN "shape" and "amplitude".

    • One easy way to get the list of inputs (all subjects' standard-space 4D timeseries files) at the end of the command is to use the following (instead of listing the files explicitly, by hand), to get the list of files that was fed into your group-ICA: `cat somewhere.gica/.filelist`

 

 

Explanation of outputs

  • dr_stage1_subject[#SUB].txt - the timeseries outputs of stage 1 of the dual-regression. One text file per subject, each containing columns of timeseries - one timeseries per group-ICA component. These timeseries can be fed into further network modelling, e.g., taking the N timeseries and generating an NxN correlation matrix.

  • dr_stage2_subject[#SUB].nii.gz - the spatial maps outputs of stage 2 of the dual-regression. One 4D image file per subject, and within each, one timepoint (3D image) per original group-ICA component. These are the GLM "parameter estimate" (PE) images, i.e., are not normalised by the residual within-subject noise. By default we recommend that it is these that are fed into stage 3 (the final cross-subject modelling).

  • dr_stage2_subject[#SUB]_Z.nii.gz - the Z-stat version of the above, which could be fed into the cross-subject modelling, but in general does not seem to work as well as using the PEs.

  • dr_stage2_ic[#ICA].nii.gz - the same as the PE images described above, but reorganised into being one 4D image file per group-ICA component, and, within each, having one timepoint (3D image) per subject. This reorganisation is to allow stage 3, the cross-subject modelling for each group-ICA component - so it is these files that would normally be fed into randomise.

  • dr_stage3_ic[#ICA]_tstat[#CON].nii.gz - the output of "stage 3", i.e. files created by running randomise, doing cross-subject statistics separately for each group-ICA component. You'll get one set of statistical output files per group-ICA component, and, within that set of statistical output files, one t-stat (etc.) per contrast in the cross-subject contrast file (design.con). The corresponding corrected (1-p) p-value images are called *corrp*.

 

 

Multiple-comparison correction across all RSNs 

The need for correction, and correction via Bonferroni

Warning: The corrected p-values output by the final randomise (*corrp*) are fully corrected for multiple comparisons across voxels, but only for each RSN in its own right, and only doing one-tailed testing (for t-contrasts specified in design.con). This means that if you test (with randomise) all components found by the initial group-ICA, and you do not have a prior reason for only considering one of them, you should correct your corrected p-values by a further factor. For example, let's say that your group-ICA found 30 components, and you decided to ignore 18 of them as being artefact. You therefore only considered 12 RSNs as being of potential interest, and looked at the outputs of randomise for these 12, with your model being a two-group test (controls and patients). However, you didn't know whether you were looking for increases or decreases in RSN connectivity, and so you ran the two-group contrast both ways for each RSN. In this case, instead of your corrected p-values needing to be <0.05 for full significance, they really need to be < 0.05 / (12 * 2) = 0.002 !

 

FAQ

What does it mean if I find a dual-regression result outside a given RSN?

For example, if you have two groups of subjects (patients and controls), did a group-ICA on the basis of all subjects from both groups, and then run dual-regression. You then did a two-group t-test using the spatial maps output by dual-regression, and found a significant difference for one of the RSNs. However, what does it mean if the voxels showing a significant difference are not "within" the (group-average) ICA map for that RSN? This is not necessarily indicative of a problem at all (as long as it's in grey matter!). It just means that the "connectivity" of this area with the main regions of this RSN is different in the two groups, despite on average (across both groups) not being strongly connected. For example, this area might have a weak positive correlation with the main areas of this RSN in the control group, and a weak negative correlation in the patient group.

 

Referencing

If you use dual regression in your research, please make sure that you reference at least one of the articles listed below. For your convenience, we provide example text, which you are welcome to use in your methods description.

"The set of spatial maps from the group-average analysis was used to generate subject-specific versions of the spatial maps, and associated timeseries, using dual regression [Beckmann09,Filippini09]. First, for each subject, the group-average set of spatial maps is regressed (as spatial regressors in a multiple regression) into the subject's 4D space-time dataset. This results in a set of subject-specific timeseries, one per group-level spatial map. Next, those timeseries are regressed (as temporal regressors, again in a multiple regression) into the same 4D dataset, resulting in a set of subject-specific spatial maps, one per group-level spatial map. We then tested for [group differences, etc.] using FSL's randomise permutation-testing tool."

 

[Beckmann 2009] C.F. Beckmann, C.E. Mackay, N. Filippini, and S.M. Smith. Group comparison of resting-state FMRI data using multi-subject ICA and dual regression. OHBM, 2009.

[Filippini 2009] N. Filippini, B.J. MacIntosh, M.G. Hough, G.M. Goodwin, G.B. Frisoni, S.M. Smith, P.M. Matthews, C.F. Beckmann and C.E. Mackay. Distinct patterns of brain activity in young carriers of the APOE-ε4 allele. PNAS, 106(17):7209-14, 2009.

 

Example

Step by Step Guide - Resting state analysis (with dual regression)

  • Initial processing (dicom conversion, fslreorient2std, brain extraction for structurals)

  • [ Optional: denoise individual datasets with FIX or via manual classification and denoising ]

  • Run concat ICA via the Melodic GUI for all sessions/subjects (go through each tab and fill in appropriate information)

    Check the webpage output, especially the registrationsLook at output components and decide what networks are of interest

    • Misc tab: defaults are fine

    • Data tab: select session/subject dataset (if multiple sessions per subject exist then include individual sessions as separate inputs, and do not concatenate the data)

    • Pre-Stats tab: the defaults here represent our general recommendations

    • Registration tab: we recommend using a Main structural image, with BBR, plus nonlinear registration to the Standard space

    • Stats tab: select Multi-session temporal concatenation

    • Post-Stats tab: the settings here are unimportant in this instance

  • Run the Glm GUI (for higher-level analysis)

    • Setup an appropriate group design (e.g. unpaired group difference) - the Wizard offers some simple/common designs

    • Save the design (need .mat and .con files later)

  • Run the dual_regression script, from the directory where the melodic outputs were written (use the GLM design files, melodic_IC image, .filelist file)

  • Look at the outputs from dual regression

    • These outputs are from randomise and the *corrp* images are the crucial ones to view (these are the multiple comparison corrected p-values, stored as 1-p values)

posted @ 2016-01-13 15:11  minks  阅读(1874)  评论(0)  编辑  收藏  举报