rc.local设置Linux开机启动
关于rc.local
文件
/etc/rc.local
是/etc/rc.d/rc.local
的软链接,可以用于控制系统boot时执行的脚本命令
其内容一般如下:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
printf "My IP address is %s\n" "$_IP"
fi
设置开机启动
在这里我是在树莓派上设置qbittorrent-nox的开机启动,在rc.local
文件最后添加如下命令
sudo qbittorrent-nox --webui-port=8070 -d
注意事项
【】
本文来自博客园,作者:Minerw,转载请注明原文链接:https://www.cnblogs.com/minerw/p/linux-start-up-config-through-rc_local.html