在vcs中编译及运行测试E203例子

      E203的Makefile默认是调用 iverilog编译rtl，我们可以做如下修改，使其支持vcs编译。

1. 首先修改e200_opensource/tb/tb_top.v， 增加dump波形的两行代码，这样如果指定DUMPWAVE不等于0，就会打印dump出波形文件。

  initial begin
    $value$plusargs("DUMPWAVE=%d",dumpwave);
    if(dumpwave != 0)begin
         // To add your waveform generation function
	 $fsdbDumpfile("dump.fsdb");
	 $fsdbDumpvars("+all");
    end
  end

2.修改e200_opensource/vsim/bin/run.makefile, 把SIM_TOOL,SIM_OPTIONS,WAVE_TOOL,WAVE_OPTIONS这些选项为vcs和verdi

RUN_DIR      := ${PWD}

TESTCASE     := ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ui-p-addi
DUMPWAVE     := 1


VSRC_DIR     := ${RUN_DIR}/../install/rtl
VTB_DIR      := ${RUN_DIR}/../install/tb
TESTNAME     := $(notdir $(patsubst %.dump,%,${TESTCASE}.dump))
TEST_RUNDIR  := ${TESTNAME}

RTL_V_FILES		:= $(wildcard ${VSRC_DIR}/*/*.v)
TB_V_FILES		:= $(wildcard ${VTB_DIR}/*.v)

# The following portion is depending on the EDA tools you are using, Please add them by yourself according to your EDA vendors

SIM_TOOL      := vcs #To-ADD: to add the simulatoin tool
#SIM_TOOL      := iverilog # this is a free solution here to use iverilog to compile the code

SIM_OPTIONS   := -full64 -line +vcsd +vpi -r +plusarg_save -Mupdate +cli+3 +error+10 +v2k +ntb_exit_on_error=10 -negdelay +neg_tchk +memcbk +sdrverbose -timescale=1ns/100ps +warn=all +warn=noTFIPC +warn=noWSUM -sverilog -l vcs.log -LDFLAGS -rdynamic -P ${NOVAS_HOME}/share/PLI/VCS/linux64/novas_new_dumper.tab ${NOVAS_HOME}/share/PLI/VCS/linux64/pli.a +incdir+${VSRC_DIR}/core/+${VSRC_DIR}/perips/
#To-ADD: to add the simulatoin tool options

#SIM_OPTIONS   := -o vvp.exec -I "${VSRC_DIR}/core/" -I "${VSRC_DIR}/perips/" -D DISABLE_SV_ASSERTION=1 -g2005
  # This is a free solution here to use iverilog to compile the code. Please NOTE!!!!
  #
  # Note:
  #   Here we add a macro "DISABLE_SV_ASSERTION" to disable the system-verilog coded
  #     assertion in the RTL code because iverilog cannot support that syntax, if you
  #     use other EDA tools which support the systemverilog, you should not add this macro "DISABLE_SV_ASSERTION".
  #
  #   Here we didnt add macro "ENABLE_TB_FORCE"
  #     that macro was used to enable the random interrupt and bus-error insertion to make
  #           more intensive test in e200_opensource/tb/tb_top.v.
  #           Although the test become more intensive, the drawback is it makes the regression
  #           simulation running very slower, so by default now it is turned off.
  #           If you want to turn on them without caring the the regression speed,
  #           you can just add macro `ENABLE_TB_FORCE` here in command line.


SIM_EXEC      := ../simv #To-ADD: to add the simulatoin executable
#SIM_EXEC      := vvp ${RUN_DIR}/vvp.exec -none # The free vvp is tooooo slow to run, so just comment it out, and replaced with the fake way below
#SIM_EXEC      := echo "Test Result Summary: PASS" # This is a fake run to just direct print PASS info to the log, the user need to actually replace it to the real EDA command

WAV_TOOL      := verdi #To-ADD: to add the waveform tool
WAV_OPTIONS   := -2001 -sv -top tb_top +incdir+${VSRC_DIR}/core/+${VSRC_DIR}/perips/  #To-ADD: to add the waveform tool options
WAV_PFIX      := #To-ADD: to add the waveform file postfix

all: run

compile.flg: ${RTL_V_FILES} ${TB_V_FILES}
	@-rm -rf compile.flg
	${SIM_TOOL} ${SIM_OPTIONS}  ${RTL_V_FILES} ${TB_V_FILES} ;
	touch compile.flg

compile: compile.flg

wave:
#	gvim -p ${TESTCASE}.spike.log ${TESTCASE}.dump &
	${WAV_TOOL} ${WAV_OPTIONS} ${RTL_V_FILES} ${TB_V_FILES} &

run: compile
	rm -rf ${TEST_RUNDIR}
	mkdir ${TEST_RUNDIR}
	cd ${TEST_RUNDIR}; ${SIM_EXEC} +DUMPWAVE=${DUMPWAVE} +TESTCASE=${TESTCASE} |& tee ${TESTNAME}.log; cd ${RUN_DIR};


.PHONY: run clean all

3. cd e200_opensource/vsim, 执行make install CORE=e203,

执行make install，则会在e200_opensource/vsim目录下，创建install目录，并把testbench文件和rtl文件copy到install目录，并把testbench文件tb_top.v中的e200,替换为core_name,E200替换为CORE_NAME,也就是e203。

SIM_DIR     := ${PWD}
RUN_DIR      := ${PWD}/run
TESTNAME     := rv32ui-p-add
TESTCASE     := ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/${TESTNAME}
DUMPWAVE     := 1
CORE        := e203
CFG         := ${CORE}_config

E201        := e201
E203        := e203
E205        := e205
E205F       := e205f
E205FD      := e205fd
E225FD      := e225fd


CORE_NAME = $(shell echo $(CORE) | tr a-z A-Z)
core_name = $(shell echo $(CORE) | tr A-Z a-z)

all: run_test

install:
	mkdir -p ${SIM_DIR}/install/tb
	cp ${SIM_DIR}/../tb/tb_top.v ${SIM_DIR}/install/tb/ -rf
	sed -i "s/e200/${core_name}/g" ${SIM_DIR}/install/tb/tb_top.v
	sed -i "s/E200/${CORE_NAME}/g" ${SIM_DIR}/install/tb/tb_top.v
	cp ${SIM_DIR}/../rtl/${core_name} ${SIM_DIR}/install/rtl -rf

${RUN_DIR}:
	mkdir -p ${RUN_DIR}
	rm -f ${RUN_DIR}/Makefile
	ln -s ${SIM_DIR}/bin/run.makefile ${RUN_DIR}/Makefile

compile: ${RUN_DIR}
	make compile RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

wave: ${RUN_DIR}
	make wave TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

run_test: compile
	make run DUMPWAVE=${DUMPWAVE} TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

SELF_TESTS := $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32uc-p*.dump))
ifeq ($(core_name),${E203})
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32um-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ua-p*.dump))
endif
ifeq ($(core_name),${E205})
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32um-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ua-p*.dump))
endif
ifeq ($(core_name),${E205F})
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32um-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ua-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32uf-p*.dump))
endif
ifeq ($(core_name),${E205FD})
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32um-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ua-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ud-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32uf-p*.dump))
endif
ifeq ($(core_name),${E225FD})
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32um-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ua-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ud-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32uf-p*.dump))
endif

SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ui-p*.dump))
SELF_TESTS += $(patsubst %.dump,%,$(wildcard ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32mi-p*.dump))

regress_prepare:
	make compile
	@-rm -rf ${RUN_DIR}/rv32*.log
regress_run:
	$(foreach tst,$(SELF_TESTS), make run_test DUMPWAVE=0 TESTCASE=$(tst);)
regress_collect:
	@-rm -rf ${RUN_DIR}/regress.res
	@find ${RUN_DIR} -name "rv32*.log" -exec bin/find_test_fail.csh {} >> ${RUN_DIR}/regress.res \;
	@cat ${RUN_DIR}/regress.res
regress: regress_prepare regress_run regress_collect

clean:
	rm -rf run
	rm -rf install

.PHONY: compile run install clean all run_test regress regress_prepare regress_run regress_collect

4. 在目录e200_opensource/vsim执行make compile

这是会执行以下的flow，会创建run目录，并链接run/Makefile到bin/run.makefile，这个时候执行make compile

${RUN_DIR}:
	mkdir -p ${RUN_DIR}
	rm -f ${RUN_DIR}/Makefile
	ln -s ${SIM_DIR}/bin/run.makefile ${RUN_DIR}/Makefile

compile: ${RUN_DIR}
	make compile RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

就是在run目录下执行Makefile文件中的make all,编译rtl代码和testbench文件。

all: run

compile.flg: ${RTL_V_FILES} ${TB_V_FILES}
	@-rm -rf compile.flg
	${SIM_TOOL} ${SIM_OPTIONS}  ${RTL_V_FILES} ${TB_V_FILES} ;
	touch compile.flg

５.　在e200_opensource/vsim目录里下执行make run_test, 则会调用以下flow,默认会run testcase rv32ui-p-add

run_test: compile
     make run DUMPWAVE=${DUMPWAVE} TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

	cd ${TEST_RUNDIR}; ${SIM_EXEC} +DUMPWAVE=${DUMPWAVE} +TESTCASE=${TESTCASE} |& tee ${TESTNAME}.log; cd ${RUN_DIR};

此时run目录下会有rv32ui-p-add目录，里面会有波形文件和log文件。

６.　在e200_opensource/vsim目录里下执行 make run_test TESTNAME=rv32ui-p-and, 此时run目录下会有rv32ui-p-and目录，里面会有波形文件和log文件。

7. 在e200_opensource/vsim目录里下执行 make　wave,则会在verdi中打开rtl文件，然后打开相应test的波形文件，就可以就行调试程序了。

８.我们对Makefile进行一点改动，用make debug TESTNAME=rv32ui-p-and 就可以同时打开design和波形了。

e200_opensource/vsim/Makefile, 增加debug部分。

wave: ${RUN_DIR}
	make wave TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

debug: ${RUN_DIR}
	make debug TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

run_test: compile
	make run DUMPWAVE=${DUMPWAVE} TESTCASE=${TESTCASE} RUN_DIR=${RUN_DIR} -C ${RUN_DIR}

e200_opensource/vsim/run/Makefile, 增加debug部分。

RUN_DIR      := ${PWD}

TESTCASE     := ${RUN_DIR}/../../riscv-tools/riscv-tests/isa/generated/rv32ui-p-addi
DUMPWAVE     := 1


VSRC_DIR     := ${RUN_DIR}/../install/rtl
VTB_DIR      := ${RUN_DIR}/../install/tb
TESTNAME     := $(notdir $(patsubst %.dump,%,${TESTCASE}.dump))
TEST_RUNDIR  := ${TESTNAME}

RTL_V_FILES		:= $(wildcard ${VSRC_DIR}/*/*.v)
TB_V_FILES		:= $(wildcard ${VTB_DIR}/*.v)
WAVE_FILE		:= ${RUN_DIR}/${TESTNAME}/dump.fsdb
# The following portion is depending on the EDA tools you are using, Please add them by yourself according to your EDA vendors

SIM_TOOL      := vcs #To-ADD: to add the simulatoin tool
#SIM_TOOL      := iverilog # this is a free solution here to use iverilog to compile the code

SIM_OPTIONS   := -full64 -line +vcsd +vpi -r +plusarg_save -Mupdate +cli+3 +error+10 +v2k +ntb_exit_on_error=10 -negdelay +neg_tchk +memcbk +sdrverbose -timescale=1ns/100ps +warn=all +warn=noTFIPC +warn=noWSUM -sverilog -l vcs.log -LDFLAGS -rdynamic -P ${NOVAS_HOME}/share/PLI/VCS/linux64/novas_new_dumper.tab ${NOVAS_HOME}/share/PLI/VCS/linux64/pli.a +incdir+${VSRC_DIR}/core/+${VSRC_DIR}/perips/
#To-ADD: to add the simulatoin tool options

#SIM_OPTIONS   := -o vvp.exec -I "${VSRC_DIR}/core/" -I "${VSRC_DIR}/perips/" -D DISABLE_SV_ASSERTION=1 -g2005
  # This is a free solution here to use iverilog to compile the code. Please NOTE!!!!
  #
  # Note:
  #   Here we add a macro "DISABLE_SV_ASSERTION" to disable the system-verilog coded
  #     assertion in the RTL code because iverilog cannot support that syntax, if you
  #     use other EDA tools which support the systemverilog, you should not add this macro "DISABLE_SV_ASSERTION".
  #
  #   Here we didnt add macro "ENABLE_TB_FORCE"
  #     that macro was used to enable the random interrupt and bus-error insertion to make
  #           more intensive test in e200_opensource/tb/tb_top.v.
  #           Although the test become more intensive, the drawback is it makes the regression
  #           simulation running very slower, so by default now it is turned off.
  #           If you want to turn on them without caring the the regression speed,
  #           you can just add macro `ENABLE_TB_FORCE` here in command line.


SIM_EXEC      := ../simv #To-ADD: to add the simulatoin executable
#SIM_EXEC      := vvp ${RUN_DIR}/vvp.exec -none # The free vvp is tooooo slow to run, so just comment it out, and replaced with the fake way below
#SIM_EXEC      := echo "Test Result Summary: PASS" # This is a fake run to just direct print PASS info to the log, the user need to actually replace it to the real EDA command

WAV_TOOL      := verdi #To-ADD: to add the waveform tool
WAV_OPTIONS   := -2001 -sv -top tb_top +incdir+${VSRC_DIR}/core/+${VSRC_DIR}/perips/  #To-ADD: to add the waveform tool options
WAV_PFIX      := #To-ADD: to add the waveform file postfix

all: run

compile.flg: ${RTL_V_FILES} ${TB_V_FILES}
	@-rm -rf compile.flg
	${SIM_TOOL} ${SIM_OPTIONS}  ${RTL_V_FILES} ${TB_V_FILES} ;
	touch compile.flg

compile: compile.flg

wave:
#	gvim -p ${TESTCASE}.spike.log ${TESTCASE}.dump &
	${WAV_TOOL} ${WAV_OPTIONS} ${RTL_V_FILES} ${TB_V_FILES} &
debug:
	${WAV_TOOL} ${WAV_OPTIONS} ${RTL_V_FILES} ${TB_V_FILES} -ssf ${WAVE_FILE}
run: compile
	rm -rf ${TEST_RUNDIR}
	mkdir ${TEST_RUNDIR}
	cd ${TEST_RUNDIR}; ${SIM_EXEC} +DUMPWAVE=${DUMPWAVE} +TESTCASE=${TESTCASE} |& tee ${TESTNAME}.log; cd ${RUN_DIR};


.PHONY: run clean all

９.　在e200_opensource/vsim目录里下执行make regress_run CORE=e203, 则会运行所有的testcase，进行回归测试。

10.  在e200_opensource/vsim目录里下执行make regress_collect CORE=e203, 则会比较所有的testcase结果，如果test pass，则打印PASS,失败，则打印FAIL

11. 在e200_opensource/vsim目录里下执行make clean, 则会删除install和run目录。