最快的ASP无组件上传类(4M只需10秒)0.96版
<%
'----------------------------------------------------------------------
'转发时请保留此声明信息,这段声明不并会影响你的速度!
'******************* 无组件上传类 ********************************
'修改者:梁无惧
'电子邮件:yjlrb@21cn.com
'网站:http://www.25cn.com
'原作者:稻香老农
'原作者网站:http://www.5xsoft.com
'声明:此上传类是在化境编程界发布的无组件上传类的基础上修改的.
'在与化境编程界无组件上传类相比,速度快了将近50倍,当上传4M大小的文件时
'服务器只需要10秒就可以处理完,是目前最快的无组件上传程序,当前版本为0.96
'源代码公开,免费使用,对于商业用途,请与作者联系
'文件属性:例如上传文件为c:\myfile\doc.txt
'FileName 文件名 字符串 "doc.txt"
'FileSize 文件大小 数值 1210
'FileType 文件类型 字符串 "text/plain"
'FileExt 文件扩展名 字符串 "txt"
'FilePath 文件原路径 字符串 "c:\myfile"
'使用时注意事项:
'由于Scripting.Dictionary区分大小写,所以在网页及ASP页的项目名都要相同的大小
'写,如果人习惯用大写或小写,为了防止出错的话,可以把
'sFormName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
'改为
'(小写者)sFormName = LCase(Mid (sinfo,iFindStart,iFindEnd-iFindStart))
'(大写者)sFormName = UCase(Mid (sinfo,iFindStart,iFindEnd-iFindStart))
'**********************************************************************
'----------------------------------------------------------------------
dim oUpFileStream
Class upload_file
dim Form,File,Version
Private Sub Class_Initialize
'定义变量
dim RequestBinDate,sStart,bCrLf,sInfo,iInfoStart,iInfoEnd,tStream,iStart,oFileInfo
dim iFileSize,sFilePath,sFileType,sFormValue,sFileName
dim iFindStart,iFindEnd
dim iFormStart,iFormEnd,sFormName
'代码开始
Version="无组件上传类 Version 0.96"
set Form = Server.CreateObject("Scripting.Dictionary")
set File = Server.CreateObject("Scripting.Dictionary")
if Request.TotalBytes < 1 then Exit Sub
set tStream = Server.CreateObject("adodb.stream")
set oUpFileStream = Server.CreateObject("adodb.stream")
oUpFileStream.Type = 1
oUpFileStream.Mode = 3
oUpFileStream.Open
oUpFileStream.Write Request.BinaryRead(Request.TotalBytes)
oUpFileStream.Position=0
RequestBinDate = oUpFileStream.Read
iFormEnd = oUpFileStream.Size
bCrLf = chrB(13) & chrB(10)
'取得每个项目之间的分隔符
sStart = MidB(RequestBinDate,1, InStrB(1,RequestBinDate,bCrLf)-1)
iStart = LenB (sStart)
iFormStart = iStart+2
'分解项目
Do
iInfoEnd = InStrB(iFormStart,RequestBinDate,bCrLf & bCrLf)+3
tStream.Type = 1
tStream.Mode = 3
tStream.Open
oUpFileStream.Position = iFormStart
oUpFileStream.CopyTo tStream,iInfoEnd-iFormStart
tStream.Position = 0
tStream.Type = 2
tStream.Charset ="gb2312"
sInfo = tStream.ReadText
'取得表单项目名称
iFormStart = InStrB(iInfoEnd,RequestBinDate,sStart)-1
iFindStart = InStr(22,sInfo,"name=""",1)+6
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFormName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
'如果是文件
if InStr (45,sInfo,"filename=""",1) > 0 then
set oFileInfo= new FileInfo
'取得文件属性
iFindStart = InStr(iFindEnd,sInfo,"filename=""",1)+10
iFindEnd = InStr(iFindStart,sInfo,"""",1)
sFileName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
oFileInfo.FileName = GetFileName(sFileName)
oFileInfo.FilePath = GetFilePath(sFileName)
oFileInfo.FileExt = GetFileExt(sFileName)
iFindStart = InStr(iFindEnd,sInfo,"Content-Type: ",1)+14
iFindEnd = InStr(iFindStart,sInfo,vbCr)
oFileInfo.FileType = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
oFileInfo.FileStart = iInfoEnd
oFileInfo.FileSize = iFormStart -iInfoEnd -2
oFileInfo.FormName = sFormName
file.add sFormName,oFileInfo
else
'如果是表单项目
tStream.Close
tStream.Type = 1
tStream.Mode = 3
tStream.Open
oUpFileStream.Position = iInfoEnd
oUpFileStream.CopyTo tStream,iFormStart-iInfoEnd-2
tStream.Position = 0
tStream.Type = 2
tStream.Charset = "gb2312"
sFormValue = tStream.ReadText
form.Add sFormName,sFormValue
end if
tStream.Close
iFormStart = iFormStart+iStart+2
'如果到文件尾了就退出
loop until (iFormStart+2) = iFormEnd
RequestBinD