yum -y install gcc gcc-c++ autoconf make
卸载软件
rpm -e mysql-libs-5.1.61-4.el6.i686 --nodeps
查询
rpm -qa|grep mysql
Mkdir 创建文件夹
Rm -rf * 删除所有
Tar zxvf 名字
安装Httpd
1. 安装httpd。先检查一下httpd是否已经有安装：
[root@centos-server ~]$ rpm -qa | grep httpd
如果httpd没有安装，可以使用下面l命令进行安装：
[root@centos-server ~]$ yum install httpd
[root@centos-server ~]$ chkconfig httpd on
[root@centos-server ~]$ service httpd start
2. 测试httpd。httpd的文档根目录位于/var/www/html。我们在该目录下创建一个index.html文件，测试是否可以正常访问。
[root@centos-server /var/www/html]$ echo "<h1>It Works</h1>" > index.html [root@centos-server /var/www/html]$ curl http://localhost/index.html <h1>It Works</h1>
3. 配置防火墙。CentOS默认的防火墙策略如下：
[root@centos-server /var/www/html]$ iptables -L -n --line-
numbers Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT all --
0.0.
0.0/
0 0.0.
0.0/
0 state RELATED,ESTABLISHED 2 ACCEPT icmp --
0.0.
0.0/
0 0.0.
0.0/
0 3 ACCEPT all --
0.0.
0.0/
0 0.0.
0.0/
0 4 ACCEPT tcp --
0.0.
0.0/
0 0.0.
0.0/
0 state NEW tcp dpt:
22 5 REJECT all --
0.0.
0.0/
0 0.0.
0.0/
0 reject-with icmp-host-
prohibited Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 REJECT all --
0.0.
0.0/
0 0.0.
0.0/
0 reject-with icmp-host-
prohibited Chain OUTPUT (policy ACCEPT) num target prot opt source destination
该策略阻止了其它机器除了22（SSH）端口之外的所有端口对本机的访问。httpd服务需要开启80端口，按照下面的方式开启80端口：
[root@centos-server ~]$ iptables -I INPUT
5 -p tcp -m tcp --dport
80 -m state --state NEW -
j ACCEPT
[root@centos-server ~
]$ service iptables save iptables: Saving firewall rules to /etc/sysconfig/
iptables:[ OK ]
[root@centos-server ~
]$ service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ]
OK，现在用其它机器访问一下http://192.168.12.215/index.html（服务器IP地址为192.168.12.215）试试看。
安装MySQL
1. 安装MySQL。先检查一下mysql-server是否已经有安装：
[root@centos-server ~]$ rpm -qa | grep mysql-server
如果mysql-server没有安装，可以使用下面l命令进行安装：
[root@centos-server ~]$ yum install mysql-server
[root@centos-server ~]$ chkconfig mysqld on
[root@centos-server ~]$ service mysqld start
2. 配置MySQL。MySQL提供了一个名为mysql_secure_installation的工具，协助我们在安装完毕后做一些必要的安全设置。
[root@centos-server ~
]$ mysql_secure_installation ... ... In order to log into MySQL to secure it, we'll need the current password
for the root user. If you
've just installed MySQL, and you haven
't set the root password yet, the password will be blank, so you should just press enter here. Enter current password for root (enter
for none): ###输入当前的root密码, 默认为空 OK, successfully used password, moving on... Setting the root password ensures that nobody can log into the MySQL root user without the proper authorisation. Set root password? [Y/
n] ###是否需要重设root密码？ New password: Re-
enter new password: Password updated successfully!
Reloading privilege tables.. ... Success!
By default, a MySQL installation has an anonymous user, allowing anyone to log into MySQL without having to have a user account created for them. This is intended only for testing, and to
make the installation go a bit smoother. You should remove them before moving into a production environment. Remove anonymous users? [Y/
n] ###是否移除匿名用户？ ... Success!
Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network. Disallow root login remotely? [Y/
n] ###是否禁用root远程连接？ ... Success!
By default, MySQL comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment. Remove test database and access to it? [Y/
n] n ###是否删除test数据库？ n ... skipping. Reloading the privilege tables will ensure that all changes made so far will take effect immediately. Reload privilege tables now? [Y/
n] ###重新载入授权信息？ ... Success!
Cleaning up... All done! If you
've completed all of the above steps, your MySQL installation should now be secure. Thanks for using MySQL!
3. 检查MySQL是否正常运行。
[root@centos-server ~]$ mysqladmin -h localhost -u root -
p version Enter password: mysqladmin Ver 8.42 Distrib
5.1.
61,
for redhat-linux-
gnu on x86_64 Copyright (c) 2000,
2011, Oracle and/
or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/
or its affiliates. Other names may be trademarks of their respective owners. Server version 5.1.
61 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/lib/mysql/
mysql.sock Uptime: 16 min
14 sec Threads: 1 Questions:
21 Slow queries:
0 Opens:
15 Flush tables:
1 Open tables:
8 Queries per second avg:
0.21
安装PHP
1. 安装php。先检查一下php是否已经有安装：
[root@centos-server ~]$ rpm -qa | grep php
如果httpd没有安装，可以使用下面l命令进行安装：
[root@centos-server ~]$ yum install php
2. 测试php。创建文件hello-world.php，文件内容如下：
<?php print "Hello World!\n"; ?>
执行hello-world.php，检查PHP是否有正常运行：
[root@centos-server ~]$ php -f hello-world.php Hello World!
3. 测试与httpd的集成。在/var/www/html下创建文件php-info.php，文件内容如下：
<?php phpinfo(); ?>
使用浏览器请求PHP文件之前必须重启httpd：
[root@centos-server /var/www/html]$ service httpd restart
然后打开网址http://192.168.12.215/php-info.php试试看：
4. 安装php-mysql模块。默认php没有安装该模块。
[root@centos-server ~]$ yum install php-mysql
[root@centos-server ~]$ service httpd restart ###需要重启httpd
再次打开网址http://192.168.12.215/php-info.php，发现找到mysql模块：
其它的php模块也可以比照此种方式安装。使用下面的命令可以查询在CentOS软件源中可用的php模块：
[root@centos-server ~
]$ yum search php cups-php.x86_64 : Common Unix Printing System -
php module graphviz-php.x86_64 : PHP extension
for graphviz php.x86_64 : PHP scripting language for creating dynamic web sites php-bcmath.x86_64 : A module
for PHP applications
for using the bcmath library php-cli.x86_64 : Command-line interface
for PHP php-common.x86_64 : Common files
for PHP php-dba.x86_64 : A database abstraction layer module
for PHP applications php-devel.x86_64 : Files needed
for building PHP extensions php-embedded.x86_64 : PHP library
for embedding
in applications php-gd.x86_64 : A module
for PHP applications
forusing the gd graphics library php-imap.x86_64 : A module
for PHP applications that use IMAP php-intl.x86_64 : Internationalization extension
for PHP applications php-ldap.x86_64 : A module
for PHP applications that use LDAP php-mbstring.x86_64 : A module
for PHP applications
which need multi-
byte string handling php-mysql.x86_64 : A module
for PHP applications that use MySQL databases php-odbc.x86_64 : A module
for PHP applications that use ODBC databases php-pdo.x86_64 : A database access abstraction module
for PHP applications php-
pear.noarch : PHP Extension and Application Repository framework php-pecl-
apc.x86_64 : APC caches and optimizes PHP intermediate code php-pgsql.x86_64 : A PostgreSQL database module
for PHP php-process.x86_64 : Modules
for PHP script using system process interfaces php-pspell.x86_64 : A module
for PHP applications
for using pspell interfaces php-recode.x86_64 : A module
for PHP applications
for using the recode library php-snmp.x86_64 : A module
for PHP applications that query SNMP-
managed devices php-soap.x86_64 : A module
for PHP applications that use the SOAP protocol php-
tidy.x86_64 : Standard PHP module provides tidy library support php-xml.x86_64 : A module
for PHP applications
which use XML php-xmlrpc.x86_64 : A module
for PHP applications
which use the XML-
RPC protocol php-zts.x86_64 : Thread-safe PHP interpreter
for use with the Apache HTTP Server rrdtool-
php.x86_64 : PHP RRDtool bindings uuid-php.x86_64 : PHP support
for Universally Unique Identifier library php-
enchant.x86_64 : Human Language and Character Encoding Support php-pecl-apc-
devel.x86_64 : APC developer files (header) php-pecl-memcache.x86_64 : Extension to work with the Memcached caching daemon
