ＨCNA管理设置文件系统FTP服务上传下载文件
1、拓扑图
2、R2配置
The device is running!
######################################
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]interface g
[R2]interface GigabitEthernet 0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.1.2 24
[R2-GigabitEthernet0/0/0]
Dec 9 2017 20:42:00-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]q
[R2]dis in
[R2]dis ip int
[R2]dis ip interface br
[R2]dis ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 192.168.1.2/24 up up
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
[R2]ftp server enable
Info: Succeeded in starting the FTP server
[R2]aaa
[R2-aaa]lo
[R2-aaa]local-user user-ftp pass
[R2-aaa]local-user user-ftp password ci
[R2-aaa]local-user user-ftp password cipher huawei
Info: Add a new user.
[R2-aaa]lo
[R2-aaa]local-user user-f
[R2-aaa]local-user user-ftp priv
[R2-aaa]local-user user-ftp privilege level 3
[R2-aaa]loc
[R2-aaa]local-user user
[R2-aaa]local-user user-ftp serv
[R2-aaa]local-user user-ftp service-type ftp
[R2-aaa]lo
[R2-aaa]local-user user
[R2-aaa]local-user user-ftp ftp
[R2-aaa]local-user user-ftp ftp-directory flash:
[R2-aaa]q
[R2]save
^
Error: Unrecognized command found at '^' position.
[R2]q
<R2>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait........
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<R2>
3、R1上配置并测试从服务器上下载结果
The device is running!
################################################################################
<Huawei>
Dec 9 2017 20:39:51-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g
[R1]int GigabitEthernet 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.11 24
Dec 9 2017 20:48:46-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]q
[R1]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=190 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=90 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=70 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=80 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 70/100/190 ms
[R1]ftp 192.168.1.2
^
Error: Unrecognized command found at '^' position.
[R1]q
<R1>ftp 192.168.1.2
Trying 192.168.1.2 ...
Press CTRL+K to abort
Connected to 192.168.1.2.
220 FTP service ready.
User(192.168.1.2:(none)):user-ftp
331 Password required for user-ftp.
Enter password:
230 User logged in.
[R1-ftp]?
FTP Client view commands:
ascii Set the file transfer type to ASCII, and it is the default type
binary Set the file transfer type to support the binary image
bye Terminate the FTP connection to the remote server, and exit FTP
cd Change the remote working directory
cdup Change the remote directory to parent directory
close Terminate the FTP connection to the remote server, and return to
the FTP command mode
debugging Enable system debugging functions
delete Delete a file on the remote machine
dir List the contents of the current or remote directory, and
optionally output the contents to a local file
disconnect Terminate the FTP connection to the remote server, and return to
the FTP command mode
get Download the remote file to the local host
lcd Display the current working directory
ls List the contents of the current or remote directory, and
optionally output the contents that vary with the remote host
system to a local file
mkdir Create a directory on the remote host
open Establish an FTP connection
passive Set the toggle passive mode, the default is on
put Upload a local file to the remote host
pwd Print the name of the current working directory on the remote host
[R1-ftp]
221 Server closing.
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>ftp 192.168.1.2
Trying 192.168.1.2 ...
Press CTRL+K to abort
Connected to 192.168.1.2.
220 FTP service ready.
User(192.168.1.2:(none)):user-ftp
331 Password required for user-ftp.
Enter password:
230 User logged in.
[R1-ftp]ls
200 Port command okay.
150 Opening ASCII mode data connection for *.
dhcp
..
portalpage.zip
statemach.efs
sslvpn.zip
private-data.txt
.
vrpcfg.zip
226 Transfer complete.
FTP: 86 byte(s) received in 0.210 second(s) 409.52byte(s)/sec.
[R1-ftp]lls
^
Error: Unrecognized command found at '^' position.
[R1-ftp]pwd
257 "/" is current directory.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:45 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 467 byte(s) received in 0.150 second(s) 3.11Kbyte(s)/sec.
[R1-ftp]get stat
[R1-ftp]get statemach.efs 123.efs
200 Port command okay.
150 Opening ASCII mode data connection for statemach.efs.
226 Transfer complete.
FTP: 2263 byte(s) received in 0.200 second(s) 11.31Kbyte(s)/sec.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:45 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 467 byte(s) received in 0.130 second(s) 3.59Kbyte(s)/sec.
[R1-ftp]pwd
257 "/" is current directory.
[R1-ftp]put sslq
[R1-ftp]put ssl
[R1-ftp]put sslvp
[R1-ftp]put sslvpn.zip 321.zip
200 Port command okay.
150 Opening ASCII mode data connection for 321.zip.
1% 3% 5% 7% 9%11%13%15%17%19%21%23%25%27%29%31%33%35%37%39%
41%43%45%47%49%51%53%55%57%59%61%63%65%67%69%71%73%75%77%79%
81%83%85%87%88%90%92%94%96%98%
100%
226 Transfer complete.
FTP: 828482 byte(s) sent in 3.050 second(s) 271.63Kbyte(s)/sec.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 828482 Dec 09 13:02 321.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 13:02 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 531 byte(s) received in 0.200 second(s) 2.65Kbyte(s)/sec.
[R1-ftp]ldir
^
Error: Unrecognized command found at '^' position.
[R1-ftp]
################################################################################
<Huawei>
Dec 9 2017 20:39:51-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g
[R1]int GigabitEthernet 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.11 24
Dec 9 2017 20:48:46-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]q
[R1]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=190 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=90 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=70 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=80 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=70 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 70/100/190 ms
[R1]ftp 192.168.1.2
^
Error: Unrecognized command found at '^' position.
[R1]q
<R1>ftp 192.168.1.2
Trying 192.168.1.2 ...
Press CTRL+K to abort
Connected to 192.168.1.2.
220 FTP service ready.
User(192.168.1.2:(none)):user-ftp
331 Password required for user-ftp.
Enter password:
230 User logged in.
[R1-ftp]?
FTP Client view commands:
ascii Set the file transfer type to ASCII, and it is the default type
binary Set the file transfer type to support the binary image
bye Terminate the FTP connection to the remote server, and exit FTP
cd Change the remote working directory
cdup Change the remote directory to parent directory
close Terminate the FTP connection to the remote server, and return to
the FTP command mode
debugging Enable system debugging functions
delete Delete a file on the remote machine
dir List the contents of the current or remote directory, and
optionally output the contents to a local file
disconnect Terminate the FTP connection to the remote server, and return to
the FTP command mode
get Download the remote file to the local host
lcd Display the current working directory
ls List the contents of the current or remote directory, and
optionally output the contents that vary with the remote host
system to a local file
mkdir Create a directory on the remote host
open Establish an FTP connection
passive Set the toggle passive mode, the default is on
put Upload a local file to the remote host
pwd Print the name of the current working directory on the remote host
[R1-ftp]
221 Server closing.
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>ftp 192.168.1.2
Trying 192.168.1.2 ...
Press CTRL+K to abort
Connected to 192.168.1.2.
220 FTP service ready.
User(192.168.1.2:(none)):user-ftp
331 Password required for user-ftp.
Enter password:
230 User logged in.
[R1-ftp]ls
200 Port command okay.
150 Opening ASCII mode data connection for *.
dhcp
..
portalpage.zip
statemach.efs
sslvpn.zip
private-data.txt
.
vrpcfg.zip
226 Transfer complete.
FTP: 86 byte(s) received in 0.210 second(s) 409.52byte(s)/sec.
[R1-ftp]lls
^
Error: Unrecognized command found at '^' position.
[R1-ftp]pwd
257 "/" is current directory.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:45 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 467 byte(s) received in 0.150 second(s) 3.11Kbyte(s)/sec.
[R1-ftp]get stat
[R1-ftp]get statemach.efs 123.efs
200 Port command okay.
150 Opening ASCII mode data connection for statemach.efs.
226 Transfer complete.
FTP: 2263 byte(s) received in 0.200 second(s) 11.31Kbyte(s)/sec.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:45 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 467 byte(s) received in 0.130 second(s) 3.59Kbyte(s)/sec.
[R1-ftp]pwd
257 "/" is current directory.
[R1-ftp]put sslq
[R1-ftp]put ssl
[R1-ftp]put sslvp
[R1-ftp]put sslvpn.zip 321.zip
200 Port command okay.
150 Opening ASCII mode data connection for 321.zip.
1% 3% 5% 7% 9%11%13%15%17%19%21%23%25%27%29%31%33%35%37%39%
41%43%45%47%49%51%53%55%57%59%61%63%65%67%69%71%73%75%77%79%
81%83%85%87%88%90%92%94%96%98%
100%
226 Transfer complete.
FTP: 828482 byte(s) sent in 3.050 second(s) 271.63Kbyte(s)/sec.
[R1-ftp]dir
200 Port command okay.
150 Opening ASCII mode data connection for *.
drwxrwxrwx 1 noone nogroup 0 Dec 09 12:39 dhcp
-rwxrwxrwx 1 noone nogroup 121802 May 26 2014 portalpage.zip
-rwxrwxrwx 1 noone nogroup 828482 Dec 09 13:02 321.zip
-rwxrwxrwx 1 noone nogroup 2263 Dec 09 12:39 statemach.efs
-rwxrwxrwx 1 noone nogroup 828482 May 26 2014 sslvpn.zip
-rwxrwxrwx 1 noone nogroup 249 Dec 09 12:45 private-data.txt
drwxrwxrwx 1 noone nogroup 0 Dec 09 13:02 .
-rwxrwxrwx 1 noone nogroup 646 Dec 09 12:45 vrpcfg.zip
226 Transfer complete.
FTP: 531 byte(s) received in 0.200 second(s) 2.65Kbyte(s)/sec.
[R1-ftp]ldir
^
Error: Unrecognized command found at '^' position.
[R1-ftp]
[R1-ftp]q
221 Server closing.
<R1>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Dec 09 2017 12:39:44 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 2,263 Dec 09 2017 13:01:04 123.efs
3 -rw- 2,263 Dec 09 2017 12:39:27 statemach.efs
4 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
1,090,732 KB total (784,460 KB free)
<R1>
221 Server closing.
<R1>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Dec 09 2017 12:39:44 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 2,263 Dec 09 2017 13:01:04 123.efs
3 -rw- 2,263 Dec 09 2017 12:39:27 statemach.efs
4 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
1,090,732 KB total (784,460 KB free)
<R1>
4、R2测试从R１客户端上传文件
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R2>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 drw- - Dec 09 2017 12:39:46 dhcp
1 -rw- 121,802 May 26 2014 09:20:58 portalpage.zip
2 -rw- 828,482 Dec 09 2017 13:02:18 321.zip
3 -rw- 2,263 Dec 09 2017 12:39:31 statemach.efs
4 -rw- 828,482 May 26 2014 09:20:58 sslvpn.zip
5 -rw- 249 Dec 09 2017 12:45:50 private-data.txt
6 -rw- 646 Dec 09 2017 12:45:50 vrpcfg.zip
1,090,732 KB total (783,640 KB free)
<R2>
