处理离散型特征和连续型特征共存的情况 归一化 论述了对离散特征进行one-hot编码的意义
转发：https://blog.csdn.net/lujiandong1/article/details/49448051
处理离散型特征和连续型特征并存的情况，如何做归一化。
参考博客进行了总结：
https://www.quora.com/What-are-good-ways-to-handle-discrete-and-continuous-inputs-together
总结如下：
1、拿到获取的原始特征，必须对每一特征分别进行归一化，比如，特征A的取值范围是[-1000,1000]，特征B的取值范围是[-1,1].
如果使用logistic回归，w1*x1+w2*x2，因为x1的取值太大了，所以x2基本起不了作用。
所以，必须进行特征的归一化，每个特征都单独进行归一化。
2、连续型特征归一化的常用方法：
2.1：Rescale bounded continuous features: All continuous input that are bounded, rescale them to [-1, 1] through x = (2x - max - min)/(max - min).线性放缩到[-1,1]
2.2:Standardize all continuous features: All continuous input should be standardized and by this I mean, for every continuous feature, compute its mean (u) and standard deviation (s) and do x = (x - u)/s.放缩到均值为0，方差为1
1、离散型特征的处理方法：
1、Why do we binarize categorical features?
We binarize the categorical input so that they can be thought of as a vector from the Euclidean space (we call this as embedding the vector in the Euclidean space).使用one-hot编码，将离散特征的取值扩展到了欧式空间，离散特征的某个取值就对应欧式空间的某个点。
2、Why do we embed the feature vectors in the Euclidean space?
Because many algorithms for classification/regression/clustering etc. requires computing distances between features or similarities between features. And many definitions of distances and similarities are defined over features in Euclidean space. So, we would like our features to lie in the Euclidean space as well.将离散特征通过one-hot编码映射到欧式空间，是因为，在回归，分类，聚类等机器学习算法中，特征之间距离的计算或相似度的计算是非常重要的，而我们常用的距离或相似度的计算都是在欧式空间的相似度计算，计算余弦相似性，基于的就是欧式空间。
3、Why does embedding the feature vector in Euclidean space require us to binarize categorical features?
Let us take an example of a dataset with just one feature (say job_type as per your example) and let us say it takes three values 1,2,3.
Now, let us take three feature vectors x_1 = (1), x_2 = (2), x_3 = (3). What is the euclidean distance between x_1 and x_2, x_2 and x_3 & x_1 and x_3? d(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2. This shows that distance between job type 1 and job type 2 is smaller than job type 1 and job type 3. Does this make sense? Can we even rationally define a proper distance between different job types? In many cases of categorical features, we can properly define distance between different values that the categorical feature takes. In such cases, isn't it fair to assume that all categorical features are equally far away from each other?
Now, let us see what happens when we binary the same feature vectors. Then, x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1). Now, what are the distances between them? They are sqrt(2). So, essentially, when we binarize the input, we implicitly state that all values of the categorical features are equally away from each other.
将离散型特征使用one-hot编码，确实会让特征之间的距离计算更加合理。比如，有一个离散型特征，代表工作类型，该离散型特征，共有三个取值，不使用one-hot编码，其表示分别是x_1 = (1), x_2 = (2), x_3 = (3)。两个工作之间的距离是，(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2。那么x_1和x_3工作之间就越不相似吗？显然这样的表示，计算出来的特征的距离是不合理。那如果使用one-hot编码，则得到x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1)，那么两个工作之间的距离就都是sqrt(2).即每两个工作之间的距离是一样的，显得更合理。
4、About the original question?
Note that our reason for why binarize the categorical features is independent of the number of the values the categorical features take, so yes, even if the categorical feature takes 1000 values, we still would prefer to do binarization.
对离散型特征进行one-hot编码是为了让距离的计算显得更加合理。
5、Are there cases when we can avoid doing binarization?
Yes. As we figured out earlier, the reason we binarize is because we want some meaningful distance relationship between the different values. As long as there is some meaningful distance relationship, we can avoid binarizing the categorical feature. For example, if you are building a classifier to classify a webpage as important entity page (a page important to a particular entity) or not and let us say that you have the rank of the webpage in the search result for that entity as a feature, then 1] note that the rank feature is categorical, 2] rank 1 and rank 2 are clearly closer to each other than rank 1 and rank 3, so the rank feature defines a meaningful distance relationship and so, in this case, we don't have to binarize the categorical rank feature.
More generally, if you can cluster the categorical values into disjoint subsets such that the subsets have meaningful distance relationship amongst them, then you don't have binarize fully, instead you can split them only over these clusters. For example, if there is a categorical feature with 1000 values, but you can split these 1000 values into 2 groups of 400 and 600 (say) and within each group, the values have meaningful distance relationship, then instead of fully binarizing, you can just add 2 features, one for each cluster and that should be fine.
将离散型特征进行one-hot编码的作用，是为了让距离计算更合理，但如果特征是离散的，并且不用one-hot编码就可以很合理的计算出距离，那么就没必要进行one-hot编码，比如，该离散特征共有1000个取值，我们分成两组，分别是400和600,两个小组之间的距离有合适的定义，组内的距离也有合适的定义，那就没必要用one-hot 编码
离散特征进行one-hot编码后，编码后的特征，其实每一维度的特征都可以看做是连续的特征。就可以跟对连续型特征的归一化方法一样，对每一维特征进行归一化。比如归一化到[-1,1]或归一化到均值为0,方差为1
有些情况不需要进行特征的归一化：
It depends on your ML algorithms, some methods requires almost no efforts to normalize features or handle both continuous and discrete features, like tree based methods: c4.5, Cart, random Forrest, bagging or boosting. But most of parametric models (generalized linear models, neural network, SVM,etc) or methods using distance metrics (KNN, kernels, etc) will require careful work to achieve good results. Standard approaches including binary all features, 0 mean unit variance all continuous features, etc。
基于树的方法是不需要进行特征的归一化，例如随机森林，bagging 和 boosting等。基于参数的模型或基于距离的模型，都是要进行特征的归一化。
参考博客进行了总结：
https://www.quora.com/What-are-good-ways-to-handle-discrete-and-continuous-inputs-together
总结如下：
1、拿到获取的原始特征，必须对每一特征分别进行归一化，比如，特征A的取值范围是[-1000,1000]，特征B的取值范围是[-1,1].
如果使用logistic回归，w1*x1+w2*x2，因为x1的取值太大了，所以x2基本起不了作用。
所以，必须进行特征的归一化，每个特征都单独进行归一化。
2、连续型特征归一化的常用方法：
2.1：Rescale bounded continuous features: All continuous input that are bounded, rescale them to [-1, 1] through x = (2x - max - min)/(max - min).线性放缩到[-1,1]
2.2:Standardize all continuous features: All continuous input should be standardized and by this I mean, for every continuous feature, compute its mean (u) and standard deviation (s) and do x = (x - u)/s.放缩到均值为0，方差为1
1、离散型特征的处理方法：
a) Binarize categorical/discrete features: For all categorical features, represent them as multiple boolean features. For example, instead of having one feature called marriage_status, have 3 boolean features - married_status_single, married_status_married, married_status_divorced and appropriately set these features to 1 or -1. As you can see, for every categorical feature, you are adding k binary feature where k is the number of values that the categorical feature takes.对于离散的特征基本就是按照one-hot编码，该离散特征有多少取值，就用多少维来表示该特征。
为什么使用one-hot编码来处理离散型特征，这是有理由的，不是随便拍脑袋想出来的！！！具体原因，分下面几点来阐述：
1、Why do we binarize categorical features?
We binarize the categorical input so that they can be thought of as a vector from the Euclidean space (we call this as embedding the vector in the Euclidean space).使用one-hot编码，将离散特征的取值扩展到了欧式空间，离散特征的某个取值就对应欧式空间的某个点。
2、Why do we embed the feature vectors in the Euclidean space?
Because many algorithms for classification/regression/clustering etc. requires computing distances between features or similarities between features. And many definitions of distances and similarities are defined over features in Euclidean space. So, we would like our features to lie in the Euclidean space as well.将离散特征通过one-hot编码映射到欧式空间，是因为，在回归，分类，聚类等机器学习算法中，特征之间距离的计算或相似度的计算是非常重要的，而我们常用的距离或相似度的计算都是在欧式空间的相似度计算，计算余弦相似性，基于的就是欧式空间。
3、Why does embedding the feature vector in Euclidean space require us to binarize categorical features?
Let us take an example of a dataset with just one feature (say job_type as per your example) and let us say it takes three values 1,2,3.
Now, let us take three feature vectors x_1 = (1), x_2 = (2), x_3 = (3). What is the euclidean distance between x_1 and x_2, x_2 and x_3 & x_1 and x_3? d(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2. This shows that distance between job type 1 and job type 2 is smaller than job type 1 and job type 3. Does this make sense? Can we even rationally define a proper distance between different job types? In many cases of categorical features, we can properly define distance between different values that the categorical feature takes. In such cases, isn't it fair to assume that all categorical features are equally far away from each other?
Now, let us see what happens when we binary the same feature vectors. Then, x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1). Now, what are the distances between them? They are sqrt(2). So, essentially, when we binarize the input, we implicitly state that all values of the categorical features are equally away from each other.
将离散型特征使用one-hot编码，确实会让特征之间的距离计算更加合理。比如，有一个离散型特征，代表工作类型，该离散型特征，共有三个取值，不使用one-hot编码，其表示分别是x_1 = (1), x_2 = (2), x_3 = (3)。两个工作之间的距离是，(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2。那么x_1和x_3工作之间就越不相似吗？显然这样的表示，计算出来的特征的距离是不合理。那如果使用one-hot编码，则得到x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1)，那么两个工作之间的距离就都是sqrt(2).即每两个工作之间的距离是一样的，显得更合理。
4、About the original question?
Note that our reason for why binarize the categorical features is independent of the number of the values the categorical features take, so yes, even if the categorical feature takes 1000 values, we still would prefer to do binarization.
对离散型特征进行one-hot编码是为了让距离的计算显得更加合理。
5、Are there cases when we can avoid doing binarization?
Yes. As we figured out earlier, the reason we binarize is because we want some meaningful distance relationship between the different values. As long as there is some meaningful distance relationship, we can avoid binarizing the categorical feature. For example, if you are building a classifier to classify a webpage as important entity page (a page important to a particular entity) or not and let us say that you have the rank of the webpage in the search result for that entity as a feature, then 1] note that the rank feature is categorical, 2] rank 1 and rank 2 are clearly closer to each other than rank 1 and rank 3, so the rank feature defines a meaningful distance relationship and so, in this case, we don't have to binarize the categorical rank feature.
More generally, if you can cluster the categorical values into disjoint subsets such that the subsets have meaningful distance relationship amongst them, then you don't have binarize fully, instead you can split them only over these clusters. For example, if there is a categorical feature with 1000 values, but you can split these 1000 values into 2 groups of 400 and 600 (say) and within each group, the values have meaningful distance relationship, then instead of fully binarizing, you can just add 2 features, one for each cluster and that should be fine.
将离散型特征进行one-hot编码的作用，是为了让距离计算更合理，但如果特征是离散的，并且不用one-hot编码就可以很合理的计算出距离，那么就没必要进行one-hot编码，比如，该离散特征共有1000个取值，我们分成两组，分别是400和600,两个小组之间的距离有合适的定义，组内的距离也有合适的定义，那就没必要用one-hot 编码
离散特征进行one-hot编码后，编码后的特征，其实每一维度的特征都可以看做是连续的特征。就可以跟对连续型特征的归一化方法一样，对每一维特征进行归一化。比如归一化到[-1,1]或归一化到均值为0,方差为1
有些情况不需要进行特征的归一化：
It depends on your ML algorithms, some methods requires almost no efforts to normalize features or handle both continuous and discrete features, like tree based methods: c4.5, Cart, random Forrest, bagging or boosting. But most of parametric models (generalized linear models, neural network, SVM,etc) or methods using distance metrics (KNN, kernels, etc) will require careful work to achieve good results. Standard approaches including binary all features, 0 mean unit variance all continuous features, etc。
基于树的方法是不需要进行特征的归一化，例如随机森林，bagging 和 boosting等。基于参数的模型或基于距离的模型，都是要进行特征的归一化。
posted on 2018-04-03 12:42 mdumpling 阅读(1257) 评论(0) 编辑 收藏 举报
