NetFPGA-1G-CML点亮 LED
前言
用vivado建立工程的时候选择的型号为:XC7K325tffg676-1
在以下代码文件中,仿真与设计都没有问题。在xdc文件中的时钟约束与锁相环配置中还存在问题,没有寻找到解决办法
使用手册链接
原理图链接
design文件
`timescale 1ns / 1ps
module led_des(output reg[1:0] led = 2'b01,
input wire CLK);
reg[32:0] count = 0;
parameter T1MS = 3;
always@(posedge CLK)
begin
count <= count + 1;
if(count > T1MS)
begin
count <= 0;
if(led == 2'b01)
begin
led <= 2'b10;
end
else
begin
led <= 2'b01;
end
end
end
endmodule
sim仿真文件
`timescale 1ns / 1ps
module led_sim;
reg CLK;
wire [1:0] led;
initial
begin
#100
CLK = 0;
end
always #10 CLK = ~CLK;
led_des led_des_inst(
.CLK(CLK),
.led(led)
);
endmodule
xdc约束文件
create_clock -period 100.000 -name CLK -waveform {0.000 50.000} [get_ports CLK]
#create_clock -name clk100MHZ -period 10.0 [get_ports {CLK}]
set_property PACKAGE_PIN E18 [get_ports {CLK}]
set_property IOSTANDARD LVCMOS33 [get_ports {CLK}]
set_property PACKAGE_PIN E17 [get_ports {led[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {led[0]}]
set_property PACKAGE_PIN F17 [get_ports {led[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {led[1]}]