hwconfig命令详解

 

基础命令学习目录首页

  

 转载自系统技术非业余研究

本文链接地址: hwconfig查看硬件信息

最近经常要测试新硬件，了解硬件的具体型号和参数就非常重要，过去经常透过lspci, dmidecode, dmesg, ethtool, lshal, megacli等命令和各种/proc信息来了解，需要对这些工具很熟悉, 貌似比较不方便和准确。

今天看到某同学用的hwconfig感觉信息很专业，推荐给大家。这里可以下载, 感谢微博@frostwatcher同学.

hwconfig透过收集上面提到的各种信息, 然后根据wiki或者厂家公布的设备识别码, 进一步加工,给用户一个直观的信息.

不废话,效果如下：

view source

 

print?

$ uname -r

2.6.18-164.el5

$ hwconfig  -h

usage:  hwconfig [-dhnv] [-t timeout] [-r file] [-x file] [-o file]

        -d  show debugging information

        -h  show usage

        -n  don't break output lines

        -o  write output to file (- for stdout)

        -r  write raw source to file (- for stdout)

        -t  abort after timeout seconds

        -v  show version

        -x  write xml to file (- for stdout)

##简约模式

$ sudo hwconfig  

hwconfig: warning: could not run megarc; please yinst megarc

Summary:        Huawei Technologies Tecal RH2285, 2 x Xeon E5620 2.40GHz, 23.5GB / 24GB 1066MHz

System:         Huawei Technologies Tecal RH2285 (Huawei Technologies BC11BTSA)

Processors:     2 x Xeon E5620 2.40GHz 133MHz FSB (16 cores)

Memory:         23.5GB / 24GB 1066MHz == 6 x 4GB, 6 x empty

Disk:           sda (megaraid_sas0): 107GB (38%) JBOD == 1 x LSI-MegaRAID-SAS-RMB

Disk:           sdb (megaraid_sas0): 5.9TB (1%) JBOD == 1 x LSI-MegaRAID-SAS-RMB

Disk-Control:   megaraid_sas0: LSI Logic / Symbios Logic MegaRAID SAS 1078

Disk-Control:   ata_piix0: Intel 82801JI (ICH10 Family) 4 port SATA IDE Controller

Disk-Control:   ata_piix1: Intel 82801JI (ICH10 Family) 2 port SATA IDE Controller

Network:        host5 (bnx2-1): Broadcom NetXtreme II BCM5709 Gigabit Ethernet

Network:        host6 (bnx2-0): Broadcom NetXtreme II BCM5709 Gigabit Ethernet

Network:        eth0 (bnx2): 08:19:a6:24:3c:05, 1000Mb/s <full-duplex>

Network:        eth1 (bnx2): 08:19:a6:24:3c:05, 1000Mb/s <full-duplex>

OS:             RHEL Server 5.4 (Tikanga), Linux 2.6.18-164.el5 x86_64, 64-bit

BIOS:           AMI CTSAV035 12/07/2010

Hostname:       xxxxxx

##这个是非常详细的模式, 了解到各个设备的细节.

$ sudo hwconfig -x cfg.xml

$ less cfg.xml

<system code_version="1.16.7" hostname="dr4000" timestamp="1331966816" xml_version="1.0.1">

  <base_board manufacturer="Dell Inc." model="084YMW" serial="..CN137401C800C9." version="A05" />

  <bios date="10/21/2011" manufacturer="Dell Inc." pretty="Dell 1.9.0 10/21/2011" rev="1.9" version="1.9.0" />

  <chipsets summary="Intel 5500 IOH-24D B3 (Tylersburg), 82801JIR A0 (ICH10R)">

    <chipset handle="56" model="5500 IOH-24D" name="Tylersburg" pci="00:00.0" pci_handle="1" stepping="B3" type="Northbridge" vendor="Intel" />

    <chipset handle="57" model="82801JIR" name="ICH10R" pci="00:1f.0" pci_handle="19" stepping="A0" type="Southbridge" vendor="Intel" />

  </chipsets>

...

 <volume controller="scsi0" drive_write_cache="default" handle="75" name="sda" raid="RAID-0" read_ahead="adaptive" size="598879502336" spans="1" status="ok" stripe="65536">

      <drives>

        <drive>66</drive>

        <drive>67</drive>

      </drives>

      <read_cache enable="0" />

      <write_cache enable="0" policy="write-back" />

    </volume>

  </storage>

  <system manufacturer="Dell Inc." model="Dell DR4000" pretty="Dell DR4000" serial="8MCBB3X" uuid="4C4C4544-004D-4310-8042-B8C04F423358" version="" />

</system>

看着信息还是很专业的，结果微博上有同学反映是个脚本，我看了下原来hwconfig真的是个脚本：

view source

 

print?

#!/usr/bin/perl -w

# $Id$

$ENV{PATH} = "/etc/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin:/usr/local/sbin:/home/opt:/opt/MegaRAID/MegaCli:/usr/StorMan";

use strict 'vars';

use Getopt::Std;

use POSIX;

...

$ cat `which hwconfig `|wc -l   

9101

挺佩服这帮人的，脚本也能有这样的耐心，写这么长。

祝大家玩得开心！

Post Footer automatically generated by wp-posturl plugin for wordpress.

Related posts:

1. smartctl获取raid卡下intel ssd寿命
2. nmon（Linux下很好用的性能监测工具）介绍
3. 洞悉Linux系统软硬件配置