java 分批次读取大文件的三种方法
1. java 读取大文件的困难
java 读取文件的一般操作是将文件数据全部读取到内存中,然后再对数据进行操作。例如
Path path = Paths.get("file path"); byte[] data = Files.readAllBytes(path);
这对于小文件是没有问题的,但是对于稍大一些的文件就会抛出异常
Exception in thread "main" java.lang.OutOfMemoryError: Required array size too large
at java.nio.file.Files.readAllBytes(Files.java:3156)
从错误定位看出,Files.readAllBytes 方法最大支持 Integer.MAX_VALUE - 8 大小的文件,也即最大2GB的文件。一旦超过了这个限度,java 原生的方法就不能直接使用了。
2. 分次读取大文件
既然不能直接全部读取大文件到内存中,那么就应该把文件分成多个子区域分多次读取。这就会有多种方法可以使用。
(1) 文件字节流
对文件建立 java.io.BufferedInputStream ,每次调用 read() 方法时会接连取出文件中长度为 arraySize 的数据到 array 中。这种方法可行但是效率不高。
import java.io.BufferedInputStream; import java.io.FileInputStream; import java.io.IOException; /** * Created by zfh on 16-4-19. */ public class StreamFileReader { private BufferedInputStream fileIn; private long fileLength; private int arraySize; private byte[] array; public StreamFileReader(String fileName, int arraySize) throws IOException { this.fileIn = new BufferedInputStream(new FileInputStream(fileName), arraySize); this.fileLength = fileIn.available(); this.arraySize = arraySize; } public int read() throws IOException { byte[] tmpArray = new byte[arraySize]; int bytes = fileIn.read(tmpArray);// 暂存到字节数组中 if (bytes != -1) { array = new byte[bytes];// 字节数组长度为已读取长度 System.arraycopy(tmpArray, 0, array, 0, bytes);// 复制已读取数据 return bytes; } return -1; } public void close() throws IOException { fileIn.close(); array = null; } public byte[] getArray() { return array; } public long getFileLength() { return fileLength; } public static void main(String[] args) throws IOException { StreamFileReader reader = new StreamFileReader("/home/zfh/movie.mkv", 65536); long start = System.nanoTime(); while (reader.read() != -1) ; long end = System.nanoTime(); reader.close(); System.out.println("StreamFileReader: " + (end - start)); } }
(2) 文件通道
对文件建立 java.nio.channels.FileChannel ,每次调用 read() 方法时会先将文件数据读取到分配的长度为 arraySize 的 java.nio.ByteBuffer 中,再从中将已经读取到的文件数据转化到 array 中。这种利用了NIO中的通道的方法,比传统的字节流读取文件是要快一些。
import java.io.FileInputStream; import java.io.IOException; import java.nio.ByteBuffer; import java.nio.channels.FileChannel; /** * Created by zfh on 16-4-18. */ public class ChannelFileReader { private FileInputStream fileIn; private ByteBuffer byteBuf; private long fileLength; private int arraySize; private byte[] array; public ChannelFileReader(String fileName, int arraySize) throws IOException { this.fileIn = new FileInputStream(fileName); this.fileLength = fileIn.getChannel().size(); this.arraySize = arraySize; this.byteBuf = ByteBuffer.allocate(arraySize); } public int read() throws IOException { FileChannel fileChannel = fileIn.getChannel(); int bytes = fileChannel.read(byteBuf);// 读取到ByteBuffer中 if (bytes != -1) { array = new byte[bytes];// 字节数组长度为已读取长度 byteBuf.flip(); byteBuf.get(array);// 从ByteBuffer中得到字节数组 byteBuf.clear(); return bytes; } return -1; } public void close() throws IOException { fileIn.close(); array = null; } public byte[] getArray() { return array; } public long getFileLength() { return fileLength; } public static void main(String[] args) throws IOException { ChannelFileReader reader = new ChannelFileReader("/home/zfh/movie.mkv", 65536); long start = System.nanoTime(); while (reader.read() != -1) ; long end = System.nanoTime(); reader.close(); System.out.println("ChannelFileReader: " + (end - start)); } }
(3) 内存文件映射
这种方法就是把文件的内容被映像到计算机虚拟内存的一块区域,从而可以直接操作内存当中的数据而无需每次都通过 I/O 去物理硬盘读取文件。这是由当前 java 态进入到操作系统内核态,由操作系统读取文件,再返回数据到当前 java 态的过程。这样就能大幅提高我们操作大文件的速度。
import java.io.FileInputStream; import java.io.IOException; import java.nio.MappedByteBuffer; import java.nio.channels.FileChannel; /** * Created by zfh on 16-4-19. */ public class MappedFileReader { private FileInputStream fileIn; private MappedByteBuffer mappedBuf; private long fileLength; private int arraySize; private byte[] array; public MappedFileReader(String fileName, int arraySize) throws IOException { this.fileIn = new FileInputStream(fileName); FileChannel fileChannel = fileIn.getChannel(); this.fileLength = fileChannel.size(); this.mappedBuf = fileChannel.map(FileChannel.MapMode.READ_ONLY, 0, fileLength); this.arraySize = arraySize; } public int read() throws IOException { int limit = mappedBuf.limit(); int position = mappedBuf.position(); if (position == limit) { return -1; } if (limit - position > arraySize) { array = new byte[arraySize]; mappedBuf.get(array); return arraySize; } else {// 最后一次读取数据 array = new byte[limit - position]; mappedBuf.get(array); return limit - position; } } public void close() throws IOException { fileIn.close(); array = null; } public byte[] getArray() { return array; } public long getFileLength() { return fileLength; } public static void main(String[] args) throws IOException { MappedFileReader reader = new MappedFileReader("/home/zfh/movie.mkv", 65536); long start = System.nanoTime(); while (reader.read() != -1); long end = System.nanoTime(); reader.close(); System.out.println("MappedFileReader: " + (end - start)); } }
看似问题完美解决了,我们肯定会采用内存文件映射的方法去处理大文件。但是运行结果发现,这个方法仍然不能读取超过2GB的文件,明明 FileChannel.map() 方法传递的文件长度是 long 类型的,怎么和 Integer.MAX_VALUE 有关系?
Exception in thread "main" java.lang.IllegalArgumentException: Size exceeds Integer.MAX_VALUE
at sun.nio.ch.FileChannelImpl.map(FileChannelImpl.java:868)
再从错误定位可以看到
size - The size of the region to be mapped; must be non-negative and no greater than Integer.MAX_VALUE
这可以归结到一些历史原因,还有 int 类型在 java 中的深入程度,但是本质上由于 java.nio.MappedByteBuffer 是直接继承自 java.nio.ByteBuffer 的,而后者的索引变量是 int 类型的,所以前者也只能最大索引到 Integer.MAX_VALUE 的位置。这样的话我们是不是就没有办法了?当然不是,一个内存文件映射不够用,那么试一试用多个就可以了。
import java.io.FileInputStream; import java.io.IOException; import java.nio.MappedByteBuffer; import java.nio.channels.FileChannel; /** * Created by zfh on 16-4-19. */ public class MappedBiggerFileReader { private MappedByteBuffer[] mappedBufArray; private int count = 0; private int number; private FileInputStream fileIn; private long fileLength; private int arraySize; private byte[] array; public MappedBiggerFileReader(String fileName, int arraySize) throws IOException { this.fileIn = new FileInputStream(fileName); FileChannel fileChannel = fileIn.getChannel(); this.fileLength = fileChannel.size(); this.number = (int) Math.ceil((double) fileLength / (double) Integer.MAX_VALUE); this.mappedBufArray = new MappedByteBuffer[number];// 内存文件映射数组 long preLength = 0; long regionSize = (long) Integer.MAX_VALUE;// 映射区域的大小 for (int i = 0; i < number; i++) {// 将文件的连续区域映射到内存文件映射数组中 if (fileLength - preLength < (long) Integer.MAX_VALUE) { regionSize = fileLength - preLength;// 最后一片区域的大小 } mappedBufArray[i] = fileChannel.map(FileChannel.MapMode.READ_ONLY, preLength, regionSize); preLength += regionSize;// 下一片区域的开始 } this.arraySize = arraySize; } public int read() throws IOException { if (count >= number) { return -1; } int limit = mappedBufArray[count].limit(); int position = mappedBufArray[count].position(); if (limit - position > arraySize) { array = new byte[arraySize]; mappedBufArray[count].get(array); return arraySize; } else {// 本内存文件映射最后一次读取数据 array = new byte[limit - position]; mappedBufArray[count].get(array); if (count < number) { count++;// 转换到下一个内存文件映射 } return limit - position; } } public void close() throws IOException { fileIn.close(); array = null; } public byte[] getArray() { return array; } public long getFileLength() { return fileLength; } public static void main(String[] args) throws IOException { MappedBiggerFileReader reader = new MappedBiggerFileReader("/home/zfh/movie.mkv", 65536); long start = System.nanoTime(); while (reader.read() != -1) ; long end = System.nanoTime(); reader.close(); System.out.println("MappedBiggerFileReader: " + (end - start)); } }
3. 运行结果比较
用上面三种方法读取1GB文件,运行结果如下
StreamFileReader: 11494900386 ChannelFileReader: 11329346316 MappedFileReader: 11169097480
读取10GB文件,运行结果如下
StreamFileReader: 194579779394 ChannelFileReader: 190430242497 MappedBiggerFileReader: 186923035795
————————————————
原文链接:https://blog.csdn.net/zhufenghao/article/details/51192043