supervisord.conf 启动celery定时任务，flower监控

[root@192_168_12_165 project1]# cat supervisord.conf 

; Sample supervisor config file.

;

; For more information on the config file, please see:

; http://supervisord.org/configuration.html

;

; Notes:

;  - Shell expansion ("~" or "$HOME") is not supported.  Environment

;    variables can be expanded using this syntax: "%(ENV_HOME)s".

;  - Comments must have a leading space: "a=b ;comment" not "a=b;comment".



[unix_http_server]

file=/tmp/supervisor.sock   ; (the path to the socket file)

;chmod=0700                 ; socket file mode (default 0700)

;chown=nobody:nogroup       ; socket file uid:gid owner

;username=user              ; (default is no username (open server))

;password=123               ; (default is no password (open server))



;[inet_http_server]         ; inet (TCP) server disabled by default

;port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)

;username=user              ; (default is no username (open server))

;password=123               ; (default is no password (open server))



[supervisord]

logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)

logfile_maxbytes=50MB        ; (max main logfile bytes b4 rotation;default 50MB)

logfile_backups=10           ; (num of main logfile rotation backups;default 10)

loglevel=info                ; (log level;default info; others: debug,warn,trace)

pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid)

nodaemon=false               ; (start in foreground if true;default false)

minfds=1024                  ; (min. avail startup file descriptors;default 1024)

minprocs=200                 ; (min. avail process descriptors;default 200)

;umask=022                   ; (process file creation umask;default 022)

;user=chrism                 ; (default is current user, required if root)

;identifier=supervisor       ; (supervisord identifier, default is 'supervisor')

;directory=/tmp              ; (default is not to cd during start)

;nocleanup=true              ; (don't clean up tempfiles at start;default false)

;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)

;environment=KEY="value"     ; (key value pairs to add to environment)

;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)



; the below section must remain in the config file for RPC

; (supervisorctl/web interface) to work, additional interfaces may be

; added by defining them in separate rpcinterface: sections

[rpcinterface:supervisor]

supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface



[supervisorctl]

serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL  for a unix socket

;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket

;username=chris              ; should be same as http_username if set

;password=123                ; should be same as http_password if set

;prompt=mysupervisor         ; cmd line prompt (default "supervisor")

;history_file=~/.sc_history  ; use readline history if available



; The below sample program section shows all possible program subsection values,

; create one or more 'real' program: sections to be able to control them under

; supervisor.



;[program:theprogramname]

;command=/bin/cat              ; the program (relative uses PATH, can take args)

;process_name=%(program_name)s ; process_name expr (default %(program_name)s)

;numprocs=1                    ; number of processes copies to start (def 1)

;directory=/tmp                ; directory to cwd to before exec (def no cwd)

;umask=022                     ; umask for process (default None)

;priority=999                  ; the relative start priority (default 999)

;autostart=true                ; start at supervisord start (default: true)

;autorestart=unexpected        ; whether/when to restart (default: unexpected)

;startsecs=1                   ; number of secs prog must stay running (def. 1)

;startretries=3                ; max # of serial start failures (default 3)

;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)

;stopsignal=QUIT               ; signal used to kill process (default TERM)

;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)

;stopasgroup=false             ; send stop signal to the UNIX process group (default false)

;killasgroup=false             ; SIGKILL the UNIX process group (def false)

;user=chrism                   ; setuid to this UNIX account to run the program

;redirect_stderr=true          ; redirect proc stderr to stdout (default false)

;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO

;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)

;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)

;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)

;stdout_events_enabled=false   ; emit events on stdout writes (default false)

;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO

;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)

;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)

;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)

;stderr_events_enabled=false   ; emit events on stderr writes (default false)

;environment=A="1",B="2"       ; process environment additions (def no adds)

;serverurl=AUTO                ; override serverurl computation (childutils)



; The below sample eventlistener section shows all possible

; eventlistener subsection values, create one or more 'real'

; eventlistener: sections to be able to handle event notifications

; sent by supervisor.



;[eventlistener:theeventlistenername]

;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)

;process_name=%(program_name)s ; process_name expr (default %(program_name)s)

;numprocs=1                    ; number of processes copies to start (def 1)

;events=EVENT                  ; event notif. types to subscribe to (req'd)

;buffer_size=10                ; event buffer queue size (default 10)

;directory=/tmp                ; directory to cwd to before exec (def no cwd)

;umask=022                     ; umask for process (default None)

;priority=-1                   ; the relative start priority (default -1)

;autostart=true                ; start at supervisord start (default: true)

;autorestart=unexpected        ; whether/when to restart (default: unexpected)

;startsecs=1                   ; number of secs prog must stay running (def. 1)

;startretries=3                ; max # of serial start failures (default 3)

;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)

;stopsignal=QUIT               ; signal used to kill process (default TERM)

;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)

;stopasgroup=false             ; send stop signal to the UNIX process group (default false)

;killasgroup=false             ; SIGKILL the UNIX process group (def false)

;user=chrism                   ; setuid to this UNIX account to run the program

;redirect_stderr=true          ; redirect proc stderr to stdout (default false)

;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO

;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)

;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)

;stdout_events_enabled=false   ; emit events on stdout writes (default false)

;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO

;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)

;stderr_logfile_backups        ; # of stderr logfile backups (default 10)

;stderr_events_enabled=false   ; emit events on stderr writes (default false)

;environment=A="1",B="2"       ; process environment additions

;serverurl=AUTO                ; override serverurl computation (childutils)



; The below sample group section shows all possible group values,

; create one or more 'real' group: sections to create "heterogeneous"

; process groups.



;[group:thegroupname]

;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions

;priority=999                  ; the relative start priority (default 999)



; The [include] section can just contain the "files" setting.  This

; setting can list multiple files (separated by whitespace or

; newlines).  It can also contain wildcards.  The filenames are

; interpreted as relative to this file.  Included files *cannot*

; include files themselves.



;[include]

;files = relative/directory/*.ini





[program:celery.worker] 

;指定运行目录 

directory=/project1

;运行目录下执行命令

command=python manage.py celery worker --loglevel=info --logfile logs/celery/celery.log

;启动设置 

numprocs=1 ;进程数

autostart=true ;当supervisor启动时,程序将会自动启动 

autorestart=true ;自动重启

;停止信号,默认TERM 

;中断:INT (类似于Ctrl+C)(kill -INT pid)，退出后会将写文件或日志(推荐) 

;终止:TERM (kill -TERM pid) 

;挂起:HUP (kill -HUP pid),注意与Ctrl+Z/kill -stop pid不同 

;从容停止:QUIT (kill -QUIT pid) 

stopsignal=INT

;输出日志 

stdout_logfile=logs/celery/celery.log

stdout_logfile_maxbytes=10MB ;默认最大50M 

stdout_logfile_backups=10 ;日志文件备份数，默认为10 

;错误日志 

redirect_stderr=false ;为true表示禁止监听错误 

stderr_logfile=logs/celery/celery_worker_err.log 

stderr_logfile_maxbytes=10MB 

stderr_logfile_backups=10



[program:celery.beat]

;指定运行目录

directory=/project1

;运行目录下执行命令

command=python manage.py celery beat

;启动设置

numprocs=1 ;进程数

autostart=true ;当supervisor启动时,程序将会自动启动

autorestart=true ;自动重启

;停止信号,默认TERM

;中断:INT (类似于Ctrl+C)(kill -INT pid)，退出后会将写文件或日志(推荐)

;终止:TERM (kill -TERM pid)

;挂起:HUP (kill -HUP pid),注意与Ctrl+Z/kill -stop pid不同

;从容停止:QUIT (kill -QUIT pid)

stopsignal=INT

;输出日志

stdout_logfile=logs/celery/beat.log

stdout_logfile_maxbytes=10MB ;默认最大50M

stdout_logfile_backups=10 ;日志文件备份数，默认为10

;错误日志

redirect_stderr=false ;为true表示禁止监听错误

stderr_logfile=logs/celery/beat_err.log

stderr_logfile_maxbytes=10MB

stderr_logfile_backups=10



[program:celery.flower]

;指定运行目录

directory=/project1

;运行目录下执行命令

command=python manage.py celery flower -l info 

;启动设置

numprocs=1 ;进程数



[inet_http_server]         ; inet (TCP) server disabled by default

port=192.168.12.165:9001        ; (ip_address:port specifier, *:port for all iface)

;username=admin              ; (default is no username (open server))

;password=admin               ; (default is no password (open server))



[root@192_168_12_165 project1]

[root@192_168_1_165 oa]# cat supervisord.conf

; Sample supervisor config file.

;

; For more information on the config file, please see:

; http://supervisord.org/configuration.html

;

; Notes:

; - Shell expansion ("~" or "$HOME") is not supported. Environment

; variables can be expanded using this syntax: "%(ENV_HOME)s".

; - Comments must have a leading space: "a=b ;comment" not "a=b;comment".

[unix_http_server]

file=/tmp/supervisor.sock ; (the path to the socket file)

;chmod=0700 ; socket file mode (default 0700)

;chown=nobody:nogroup ; socket file uid:gid owner

;username=user ; (default is no username (open server))

;password=123 ; (default is no password (open server))

;[inet_http_server] ; inet (TCP) server disabled by default

;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface)

;username=user ; (default is no username (open server))

;password=123 ; (default is no password (open server))

[supervisord]

logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)

logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)

logfile_backups=10 ; (num of main logfile rotation backups;default 10)

loglevel=info ; (log level;default info; others: debug,warn,trace)

pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid)

nodaemon=false ; (start in foreground if true;default false)

minfds=1024 ; (min. avail startup file descriptors;default 1024)

minprocs=200 ; (min. avail process descriptors;default 200)

;umask=022 ; (process file creation umask;default 022)

;user=chrism ; (default is current user, required if root)

;identifier=supervisor ; (supervisord identifier, default is 'supervisor')

;directory=/tmp ; (default is not to cd during start)

;nocleanup=true ; (don't clean up tempfiles at start;default false)

;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP)

;environment=KEY="value" ; (key value pairs to add to environment)

;strip_ansi=false ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC

; (supervisorctl/web interface) to work, additional interfaces may be

; added by defining them in separate rpcinterface: sections

[rpcinterface:supervisor]

supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]

serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket

;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket

;username=chris ; should be same as http_username if set

;password=123 ; should be same as http_password if set

;prompt=mysupervisor ; cmd line prompt (default "supervisor")

;history_file=~/.sc_history ; use readline history if available

; The below sample program section shows all possible program subsection values,

; create one or more 'real' program: sections to be able to control them under

; supervisor.

;[program:theprogramname]

;command=/bin/cat ; the program (relative uses PATH, can take args)

;process_name=%(program_name)s ; process_name expr (default %(program_name)s)

;numprocs=1 ; number of processes copies to start (def 1)

;directory=/tmp ; directory to cwd to before exec (def no cwd)

;umask=022 ; umask for process (default None)

;priority=999 ; the relative start priority (default 999)

;autostart=true ; start at supervisord start (default: true)

;autorestart=unexpected ; whether/when to restart (default: unexpected)

;startsecs=1 ; number of secs prog must stay running (def. 1)

;startretries=3 ; max # of serial start failures (default 3)

;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)

;stopsignal=QUIT ; signal used to kill process (default TERM)

;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)

;stopasgroup=false ; send stop signal to the UNIX process group (default false)

;killasgroup=false ; SIGKILL the UNIX process group (def false)

;user=chrism ; setuid to this UNIX account to run the program

;redirect_stderr=true ; redirect proc stderr to stdout (default false)

;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO

;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)

;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)

;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)

;stdout_events_enabled=false ; emit events on stdout writes (default false)

;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO

;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)

;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)

;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)

;stderr_events_enabled=false ; emit events on stderr writes (default false)

;environment=A="1",B="2" ; process environment additions (def no adds)

;serverurl=AUTO ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible

; eventlistener subsection values, create one or more 'real'

; eventlistener: sections to be able to handle event notifications

; sent by supervisor.

;[eventlistener:theeventlistenername]

;command=/bin/eventlistener ; the program (relative uses PATH, can take args)

;process_name=%(program_name)s ; process_name expr (default %(program_name)s)

;numprocs=1 ; number of processes copies to start (def 1)

;events=EVENT ; event notif. types to subscribe to (req'd)

;buffer_size=10 ; event buffer queue size (default 10)

;directory=/tmp ; directory to cwd to before exec (def no cwd)

;umask=022 ; umask for process (default None)

;priority=-1 ; the relative start priority (default -1)