Centos7下areaDetector IOC的编译后记
https://github.com/EPICS-synApps/support/releases
synApps出新版了，本文发文时的最新版为：R6-2
Centos7下areaDetector IOC的编译 这篇发布时的版本为：R6-1
按我上面那篇已无法顺利完成流程，发现走到下面步骤得到的assemble_synApps.sh 脚本运行后get到新版的各个包编译时有太多的坑需要填。以后有空再试试6-2的新版吧，下面附上R6-1版本时得到的assemble_synApps.sh，发现老版本的脚本依然能get到R6-1的各个包，流程还可以走通，内容附在后面，哪位有空跑通新版流程定要指导一下哦。
######synAppsR6-1按上图步骤下载到的assemble_synApps.sh的文件内容#######
#!/bin/bash
shopt -s expand_aliases
# Command-line arguments
args=$*
# Flags set by command-line arguments
FULL_CLONE=False
CONFIG_SOURCED=False
# Handle command-line arguments
for arg in ${args}
do
if [ ${arg} == "full" ]
then
FULL_CLONE=True
else
if [ -e ${arg} ]
then
echo "Sourcing ${arg}"
source ${arg}
CONFIG_SOURCED=True
else
echo "${arg} does not exist."
fi
fi
done
echo "FULL_CLONE = ${FULL_CLONE}"
if [ ${CONFIG_SOURCED} == "False" ]
then
echo "Using default configuration"
EPICS_BASE=/opt/epics/base
# The name of the synApps directory can be customized
#!SYNAPPS_DIR=synApps_X_X
SUPPORT=R6-1
#!CONFIGURE=R6-1
CONFIGURE=master
UTILS=R6-1
DOCUMENTATION=R6-1
ALLENBRADLEY=2.3
ALIVE=R1-1-1
AREA_DETECTOR=master
ASYN=R4-37
AUTOSAVE=R5-10
BUSY=R1-7-2
CALC=R3-7-3
CAMAC=R2-7-1
CAPUTRECORDER=R1-7-2
DAC128V=R2-9
DELAYGEN=R1-2-1
DXP=R6-0
DXPSITORO=R1-2
DEVIOCSTATS=3.1.16
#ETHERIP=ether_ip-3-1
#GALIL=V3-6
IP=R2-20-1
IPAC=2.15
IP330=R2-9
IPUNIDIG=R2-11
LOVE=R3-2-7
LUA=R2-0
MCA=R7-8
MEASCOMP=R2-3
MODBUS=R3-0
MOTOR=R7-1
OPTICS=R2-13-3
QUADEM=R9-2-1
SNCSEQ=2.2.6
SOFTGLUE=R2-8-2
SOFTGLUEZYNQ=R2-0-2
SSCAN=R2-11-3
STD=R3-6
STREAM=2.8.9
VAC=R1-9
VME=R2-9-2
YOKOGAWA_DAS=R2-0-1
XXX=R6-1
fi
shallow_repo()
{
PROJECT=$1
MODULE_NAME=$2
RELEASE_NAME=$3
TAG=$4
FOLDER_NAME=$MODULE_NAME-${TAG//./-}
echo
echo "Grabbing $MODULE_NAME at tag: $TAG"
echo
git clone -q --branch $TAG --depth 1 https://github.com/$PROJECT/$MODULE_NAME.git $FOLDER_NAME
echo "$RELEASE_NAME=\$(SUPPORT)/$FOLDER_NAME" >> ./configure/RELEASE
echo
}
full_repo()
{
PROJECT=$1
MODULE_NAME=$2
RELEASE_NAME=$3
TAG=$4
FOLDER_NAME=$MODULE_NAME-${TAG//./-}
echo
echo "Grabbing $MODULE_NAME at tag: $TAG"
echo
git clone -q https://github.com/$PROJECT/$MODULE_NAME.git $FOLDER_NAME
CURR=$(pwd)
cd $FOLDER_NAME
git checkout -q $TAG
cd "$CURR"
echo "$RELEASE_NAME=\$(SUPPORT)/$FOLDER_NAME" >> ./configure/RELEASE
echo
}
shallow_support()
{
git clone -q --branch $2 --depth 1 https://github.com/EPICS-synApps/$1.git
}
full_support()
{
git clone -q https://github.com/EPICS-synApps/$1.git
cd $1
git checkout -q $2
cd ..
}
if [ ${FULL_CLONE} == "True" ]
then
alias get_support='full_support'
alias get_repo='full_repo'
else
# A shallow clone is the default
alias get_support='shallow_support'
alias get_repo='shallow_repo'
fi
if [ -z "${SYNAPPS_DIR}" ]
then
SYNAPPS_DIR=/opt/epics
fi
# Assume user has nothing but this file, just in case that's true.
mkdir ${SYNAPPS_DIR}
cd ${SYNAPPS_DIR}
get_support support $SUPPORT
cd support
get_support configure $CONFIGURE
get_support utils $UTILS
get_support documentation $DOCUMENTATION
SUPPORT=$(pwd)
echo "SUPPORT=$SUPPORT" > configure/RELEASE
echo '-include $(TOP)/configure/SUPPORT.$(EPICS_HOST_ARCH)' >> configure/RELEASE
echo "EPICS_BASE=$EPICS_BASE" >> configure/RELEASE
echo '-include $(TOP)/configure/EPICS_BASE' >> configure/RELEASE
echo '-include $(TOP)/configure/EPICS_BASE.$(EPICS_HOST_ARCH)' >> configure/RELEASE
echo "" >> configure/RELEASE
echo "" >> configure/RELEASE
# modules ##################################################################
# get_repo Git Project Git Repo RELEASE Name Tag
if [[ $ALIVE ]]; then get_repo epics-modules alive ALIVE $ALIVE ; fi
if [[ $ASYN ]]; then get_repo epics-modules asyn ASYN $ASYN ; fi
if [[ $AUTOSAVE ]]; then get_repo epics-modules autosave AUTOSAVE $AUTOSAVE ; fi
if [[ $BUSY ]]; then get_repo epics-modules busy BUSY $BUSY ; fi
if [[ $CALC ]]; then get_repo epics-modules calc CALC $CALC ; fi
if [[ $CAMAC ]]; then get_repo epics-modules camac CAMAC $CAMAC ; fi
if [[ $CAPUTRECORDER ]]; then get_repo epics-modules caputRecorder CAPUTRECORDER $CAPUTRECORDER ; fi
if [[ $DAC128V ]]; then get_repo epics-modules dac128V DAC128V $DAC128V ; fi
if [[ $DELAYGEN ]]; then get_repo epics-modules delaygen DELAYGEN $DELAYGEN ; fi
if [[ $DXP ]]; then get_repo epics-modules dxp DXP $DXP ; fi
if [[ $DXPSITORO ]]; then get_repo epics-modules dxpSITORO DXPSITORO $DXPSITORO ; fi
if [[ $DEVIOCSTATS ]]; then get_repo epics-modules iocStats DEVIOCSTATS $DEVIOCSTATS ; fi
if [[ $ETHERIP ]]; then get_repo EPICSTools ether_ip ETHERIP $ETHERIP ; fi
if [[ $GALIL ]]; then get_repo motorapp Galil-3-0 GALIL $GALIL ; fi
if [[ $IP ]]; then get_repo epics-modules ip IP $IP ; fi
if [[ $IPAC ]]; then get_repo epics-modules ipac IPAC $IPAC ; fi
if [[ $IP330 ]]; then get_repo epics-modules ip330 IP330 $IP330 ; fi
if [[ $IPUNIDIG ]]; then get_repo epics-modules ipUnidig IPUNIDIG $IPUNIDIG ; fi
if [[ $LOVE ]]; then get_repo epics-modules love LOVE $LOVE ; fi
if [[ $LUA ]]; then get_repo epics-modules lua LUA $LUA ; fi
if [[ $MCA ]]; then get_repo epics-modules mca MCA $MCA ; fi
if [[ $MEASCOMP ]]; then get_repo epics-modules measComp MEASCOMP $MEASCOMP ; fi
if [[ $MODBUS ]]; then get_repo epics-modules modbus MODBUS $MODBUS ; fi
if [[ $MOTOR ]]; then get_repo epics-modules motor MOTOR $MOTOR ; fi
if [[ $OPTICS ]]; then get_repo epics-modules optics OPTICS $OPTICS ; fi
if [[ $QUADEM ]]; then get_repo epics-modules quadEM QUADEM $QUADEM ; fi
if [[ $SOFTGLUE ]]; then get_repo epics-modules softGlue SOFTGLUE $SOFTGLUE ; fi
if [[ $SOFTGLUEZYNQ ]]; then get_repo epics-modules softGlueZynq SOFTGLUEZYNQ $SOFTGLUEZYNQ ; fi
if [[ $SSCAN ]]; then get_repo epics-modules sscan SSCAN $SSCAN ; fi
if [[ $STD ]]; then get_repo epics-modules std STD $STD ; fi
if [[ $STREAM ]]; then get_repo paulscherrerinstitute StreamDevice STREAM $STREAM ; fi
if [[ $VAC ]]; then get_repo epics-modules vac VAC $VAC ; fi
if [[ $VME ]]; then get_repo epics-modules vme VME $VME ; fi
if [[ $YOKOGAWA_DAS ]]; then get_repo epics-modules Yokogawa_DAS YOKOGAWA_DAS $YOKOGAWA_DAS ; fi
if [[ $XXX ]]; then get_repo epics-modules xxx XXX $XXX ; fi
if [[ $AREA_DETECTOR ]]
then
get_repo areaDetector areaDetector AREA_DETECTOR $AREA_DETECTOR
echo "ADCORE=\$(AREA_DETECTOR)/ADCore" >> configure/RELEASE
echo "ADSUPPORT=\$(AREA_DETECTOR)/ADSupport" >> configure/RELEASE
cd areaDetector-$AREA_DETECTOR
git submodule init
git submodule update ADCore
git submodule update ADSupport
git submodule update ADSimDetector
cd ADCore/iocBoot
cp EXAMPLE_commonPlugins.cmd commonPlugins.cmd
cp EXAMPLE_commonPlugin_settings.req commonPlugin_settings.req
cd ../..
cd configure
cp EXAMPLE_CONFIG_SITE.local CONFIG_SITE.local
cp EXAMPLE_CONFIG_SITE.local.WIN32 CONFIG_SITE.local.WIN32
# make release will give the correct paths for these files, so we just need to rename them
cp EXAMPLE_RELEASE_PRODS.local RELEASE_PRODS.local
cp EXAMPLE_RELEASE_LIBS.local RELEASE_LIBS.local
cp EXAMPLE_RELEASE.local RELEASE.local
# vxWorks has pthread and other issues
echo 'WITH_GRAPHICSMAGICK = NO' >> CONFIG_SITE.local.vxWorks
echo 'WITH_BLOSC = NO' >> CONFIG_SITE.local.vxWorks
echo 'WITH_BITSHUFFLE = NO' >> CONFIG_SITE.local.vxWorks
# linux-arm has X11 and other issues
echo 'WITH_BITSHUFFLE = NO' >> CONFIG_SITE.local.linux-x86_64.linux-arm
echo 'WITH_GRAPHICSMAGICK = NO' >> CONFIG_SITE.local.linux-x86_64.linux-arm
echo 'WITH_BITSHUFFLE = NO' >> CONFIG_SITE.local.linux-x86.linux-arm
echo 'WITH_GRAPHICSMAGICK = NO' >> CONFIG_SITE.local.linux-x86.linux-arm
# We are still using Epics v3
sed -i s:'WITH_PVA = YES':'WITH_PVA = NO':g CONFIG_SITE.local
sed -i s:'WITH_QSRV = YES':'WITH_QSRV = NO':g CONFIG_SITE.local
# Enable building ADSimDetector
sed -i s:'#ADSIMDETECTOR':'ADSIMDETECTOR':g RELEASE.local
cd ../..
fi
if [[ $DXP ]]
then
cd dxp-$DXP
echo "LINUX_USB_INSTALLED = NO" >> ./configure/CONFIG_SITE.linux-x86_64.linux-arm
echo "LINUX_USB_INSTALLED = NO" >> ./configure/CONFIG_SITE.linux-x86.linux-arm
cd ..
fi
if [[ $IPAC ]]
then
cd ipac-${IPAC//./-}
echo "-include \$(TOP)/../RELEASE.local" >> ./configure/RELEASE
echo "-include \$(TOP)/../RELEASE.\$(EPICS_HOST_ARCH).local" >> ./configure/RELEASE
echo "-include \$(TOP)/configure/RELEASE.local" >> ./configure/RELEASE
cd ..
fi
if [[ $MCA ]]
then
cd mca-$MCA
echo "LINUX_LIBUSB-1.0_INSTALLED = NO" >> ./configure/CONFIG_SITE.linux-x86_64.linux-arm
echo "LINUX_LIBUSB-1.0_INSTALLED = NO" >> ./configure/CONFIG_SITE.linux-x86.linux-arm
cd ..
fi
if [[ $MOTOR ]]
then
cd motor-$MOTOR
git submodule init
git submodule update
cd ..
fi
if [[ $STREAM ]]
then
cd StreamDevice-${STREAM//./-}
# Use the EPICS makefile, rather than PSI's
rm GNUmakefile
# Don't install to synApps/support
sed -i 's/TOP = ../TOP = ./g' ./Makefile
sed -i 's/TOP = ..\/../TOP = ../g' ./streamApp/Makefile
sed -i 's/TOP = ..\/../TOP = ../g' ./src/Makefile
# Comment out PCRE
sed -i 's/PCRE=/#PCRE=/g' ./configure/RELEASE
echo "SSCAN=" >> ./configure/RELEASE
echo "STREAM=" >> ./configure/RELEASE
echo "-include \$(TOP)/../RELEASE.local" >> ./configure/RELEASE
echo "-include \$(TOP)/../RELEASE.\$(EPICS_HOST_ARCH).local" >> ./configure/RELEASE
echo "-include \$(TOP)/configure/RELEASE.local" >> ./configure/RELEASE
sed -i 's/#PROD_LIBS += sscan/PROD_LIBS += sscan/g' ./streamApp/Makefile
cd ..
fi
if [[ $SNCSEQ ]]
then
# seq
wget http://www-csr.bessy.de/control/SoftDist/sequencer/releases/seq-$SNCSEQ.tar.gz
tar zxf seq-$SNCSEQ.tar.gz
# The synApps build can't handle '.'
mv seq-$SNCSEQ seq-${SNCSEQ//./-}
rm -f seq-$SNCSEQ.tar.gz
echo "SNCSEQ=\$(SUPPORT)/seq-${SNCSEQ//./-}" >> ./configure/RELEASE
if [[ $CALC ]]
then
# Uncomment sseq support in calc
cd calc-$CALC
sed -i s:'#SNCSEQ':'SNCSEQ':g configure/RELEASE
cd ..
fi
fi
if [[ $ALLENBRADLEY ]]
then
# get allenBradley-2-3
wget http://www.aps.anl.gov/epics/download/modules/allenBradley-$ALLENBRADLEY.tar.gz
tar xf allenBradley-$ALLENBRADLEY.tar.gz
mv allenBradley-$ALLENBRADLEY allenBradley-${ALLENBRADLEY//./-}
rm -f allenBradley-$ALLENBRADLEY.tar.gz
ALLENBRADLEY=${ALLENBRADLEY//./-}
echo "ALLEN_BRADLEY=\$(SUPPORT)/allenBradley-${ALLENBRADLEY}" >> ./configure/RELEASE
cd allenBradley-$ALLENBRADLEY
echo "-include \$(TOP)/../RELEASE.local" >> ./configure/RELEASE
echo "-include \$(TOP)/../RELEASE.\$(EPICS_HOST_ARCH).local" >> ./configure/RELEASE
echo "-include \$(TOP)/configure/RELEASE.local" >> ./configure/RELEASE
cd ..
fi
if [[ $GALIL ]]
then
mv Galil-3-0-$GALIL/3-6 galil-3-6
rm -Rf Galil-3-0-$GALIL
cp galil-3-6/config/GALILRELEASE galil-3-6/configure/RELEASE
echo 'GALIL=$(SUPPORT)/galil-3-6' >> ./configure/RELEASE
sed -i 's/MODULE_LIST[ ]*=[ ]*MEASCOMP/MODULE_LIST = MEASCOMP GALIL/g' Makefile
sed -i '/\$(MEASCOMP)_DEPEND_DIRS/a \$(GALIL)_DEPEND_DIRS = \$(AUTOSAVE) \$(SNCSEQ) \$(SSCAN) \$(CALC) \$(ASYN) \$(BUSY) \$(MOTOR) \$(IPAC)' Makefile
fi
make release
#############################
