DebianLinux网络源配置文档
man sources.list
SOURCES.LIST(5) APT SOURCES.LIST(5)
NAME
sources.list - List of configured APT data sources
DESCRIPTION
The source list /etc/apt/sources.list and the files contained in /etc/apt/sources.list.d/ are
designed to support any number of active sources and a variety of source media. The files list
one source per line (one-line style) or contain multiline stanzas defining one or more sources
per stanza (deb822 style), with the most preferred source listed first (in case a single version
is available from more than one source). The information available from the configured sources
is acquired by apt-get update (or by an equivalent command from another APT front-end).
SOURCES.LIST.D
The /etc/apt/sources.list.d directory provides a way to add sources.list entries in separate
files. Two different file formats are allowed as described in the next two sections. Filenames
need to have either the extension .list or .sources depending on the contained format. The
filenames may only contain letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and
period (.) characters. Otherwise APT will print a notice that it has ignored a file, unless that
file matches a pattern in the Dir::Ignore-Files-Silently configuration list - in which case it
will be silently ignored.
ONE-LINE-STYLE FORMAT
Files in this format have the extension .list. Each line specifying a source starts with a type
(e.g. deb-src) followed by options and arguments for this type. Individual entries cannot be
continued onto a following line. Empty lines are ignored, and a # character anywhere on a line
marks the remainder of that line as a comment. Consequently an entry can be disabled by
commenting out the entire line. If options should be provided they are separated by spaces and
all of them together are enclosed by square brackets ([]) included in the line after the type
separated from it with a space. If an option allows multiple values these are separated from
each other with a comma (,). An option name is separated from its value(s) by an equals sign
(=). Multivalue options also have -= and += as separators, which instead of replacing the
default with the given value(s) modify the default value(s) to remove or include the given
values.
This is the traditional format and supported by all apt versions. Note that not all options as
described below are supported by all apt versions. Note also that some older applications
parsing this format on their own might not expect to encounter options as they were uncommon
before the introduction of multi-architecture support.
DEB822-STYLE FORMAT
Files in this format have the extension .sources. The format is similar in syntax to other files
used by Debian and its derivatives, such as the metadata files that apt will download from the
configured sources or the debian/control file in a Debian source package. Individual entries are
separated by an empty line; additional empty lines are ignored, and a # character at the start
of the line marks the entire line as a comment. An entry can hence be disabled by commenting out
each line belonging to the stanza, but it is usually easier to add the field "Enabled: no" to
the stanza to disable the entry. Removing the field or setting it to yes re-enables it. Options
have the same syntax as every other field: A field name separated by a colon (:) and optionally
spaces from its value(s). Note especially that multiple values are separated by whitespaces
(like spaces, tabs and newlines), not by commas as in the one-line format. Multivalue fields
like Architectures also have Architectures-Add and Architectures-Remove to modify the default
value rather than replacing it.
This is a new format supported by apt itself since version 1.1. Previous versions ignore such
files with a notice message as described earlier. It is intended to make this format gradually
the default format, deprecating the previously described one-line-style format, as it is easier
to create, extend and modify for humans and machines alike especially if a lot of sources and/or
options are involved. Developers who are working with and/or parsing apt sources are highly
encouraged to add support for this format and to contact the APT team to coordinate and share
this work. Users can freely adopt this format already, but may encounter problems with software
not supporting the format yet.
THE DEB AND DEB-SRC TYPES: GENERAL FORMAT
The deb type references a typical two-level Debian archive, distribution/component. The
distribution is generally a suite name like stable or testing or a codename like bullseye or
bookworm while component is one of main, contrib or non-free. The deb-src type references a
Debian distribution's source code in the same form as the deb type. A deb-src line is required
to fetch source indexes.
The format for two one-line-style entries using the deb and deb-src types is:
deb [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]
deb-src [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]
Alternatively the equivalent entry in deb822 style looks like this:
Types: deb deb-src
URIs: uri
Suites: suite
Components: [component1] [component2] [...]
option1: value1
option2: value2
The URI for the deb type must specify the base of the Debian distribution, from which APT will
find the information it needs. suite can specify an exact path, in which case the components
must be omitted and suite must end with a slash (/). This is useful for the case when only a
particular sub-directory of the archive denoted by the URI is of interest. If suite does not
specify an exact path, at least one component must be present.
suite may also contain a variable, $(ARCH) which expands to the Debian architecture (such as
amd64 or armel) used on the system. This permits architecture-independent sources.list files to
be used. In general this is only of interest when specifying an exact path; APT will
automatically generate a URI with the current architecture otherwise.
Especially in the one-line-style format since only one distribution can be specified per line it
may be necessary to have multiple lines for the same URI, if a subset of all available
distributions or components at that location is desired. APT will sort the URI list after it has
generated a complete set internally, and will collapse multiple references to the same Internet
host, for instance, into a single connection, so that it does not inefficiently establish a
connection, close it, do something else, and then re-establish a connection to that same host.
APT also parallelizes connections to different hosts to more effectively deal with sites with
low bandwidth.
It is important to list sources in order of preference, with the most preferred source listed
first. Typically this will result in sorting by speed from fastest to slowest (CD-ROM followed
by hosts on a local network, followed by distant Internet hosts, for example).
As an example, the sources for your distribution could look like this in one-line-style format:
deb http://deb.debian.org/debian bullseye main contrib non-free
deb http://security.debian.org bullseye-security main contrib non-free
or like this in deb822 style format:
Types: deb
URIs: http://deb.debian.org/debian
Suites: bullseye
Components: main contrib non-free
Types: deb
URIs: http://security.debian.org
Suites: bullseye-security
Components: main contrib non-free
THE DEB AND DEB-SRC TYPES: OPTIONS
Each source entry can have options specified to modify which source is accessed and how data is
acquired from it. Format, syntax and names of the options vary between the one-line-style and
deb822-style formats as described, but they both have the same options available. For simplicity
we list the deb822 field name and provide the one-line name in brackets. Remember that besides
setting multivalue options explicitly, there is also the option to modify them based on the
default, but we aren't listing those names explicitly here. Unsupported options are silently
ignored by all APT versions.
• Architectures (arch) is a multivalue option defining for which architectures information
should be downloaded. If this option isn't set the default is all architectures as defined
by the APT::Architectures config option.
• Languages (lang) is a multivalue option defining for which languages information such as
translated package descriptions should be downloaded. If this option isn't set the default
is all languages as defined by the Acquire::Languages config option.
• Targets (target) is a multivalue option defining which download targets apt will try to
acquire from this source. If not specified, the default set is defined by the
Acquire::IndexTargets configuration scope (targets are specified by their name in the
Created-By field). Additionally, targets can be enabled or disabled by using the Identifier
field as an option with a boolean value instead of using this multivalue option.
• PDiffs (pdiffs) is a yes/no value which controls if APT should try to use PDiffs to update
old indexes instead of downloading the new indexes entirely. The value of this option is
ignored if the repository doesn't announce the availability of PDiffs. Defaults to the value
of the option with the same name for a specific index file defined in the
Acquire::IndexTargets scope, which itself defaults to the value of configuration option
Acquire::PDiffs which defaults to yes.
• By-Hash (by-hash) can have the value yes, no or force and controls if APT should try to
acquire indexes via a URI constructed from a hashsum of the expected file instead of using
the well-known stable filename of the index. Using this can avoid hashsum mismatches, but
requires a supporting mirror. A yes or no value activates/disables the use of this feature
if this source indicates support for it, while force will enable the feature regardless of
what the source indicates. Defaults to the value of the option of the same name for a
specific index file defined in the Acquire::IndexTargets scope, which itself defaults to the
value of configuration option Acquire::By-Hash which defaults to yes.
Furthermore, there are options which if set affect all sources with the same URI and Suite, so
they have to be set on all such entries and can not be varied between different components. APT
will try to detect and error out on such anomalies.
• Allow-Insecure (allow-insecure), Allow-Weak (allow-weak) and Allow-Downgrade-To-Insecure
(allow-downgrade-to-insecure) are boolean values which all default to no. If set to yes they
circumvent parts of apt-secure(8) and should therefore not be used lightly!
• Trusted (trusted) is a tri-state value which defaults to APT deciding if a source is
considered trusted or if warnings should be raised before e.g. packages are installed from
this source. This option can be used to override that decision. The value yes tells APT
always to consider this source as trusted, even if it doesn't pass authentication checks. It
disables parts of apt-secure(8), and should therefore only be used in a local and trusted
context (if at all) as otherwise security is breached. The value no does the opposite,
causing the source to be handled as untrusted even if the authentication checks passed
successfully. The default value can't be set explicitly.
• Signed-By (signed-by) is an option to require a repository to pass apt-secure(8)
verification with a certain set of keys rather than all trusted keys apt has configured. It
is specified as a list of absolute paths to keyring files (have to be accessible and
readable for the _apt system user, so ensure everyone has read-permissions on the file) and
fingerprints of keys to select from these keyrings. The recommended locations for keyrings
are /usr/share/keyrings for keyrings managed by packages, and /etc/apt/keyrings for keyrings
managed by the system operator. If no keyring files are specified the default is the
trusted.gpg keyring and all keyrings in the trusted.gpg.d/ directory (see apt-key
fingerprint). If no fingerprint is specified all keys in the keyrings are selected. A
fingerprint will accept also all signatures by a subkey of this key, if this isn't desired
an exclamation mark (!) can be appended to the fingerprint to disable this behaviour. The
option defaults to the value of the option with the same name if set in the previously
acquired Release file of this repository (only fingerprints can be specified there through).
Otherwise all keys in the trusted keyrings are considered valid signers for this repository.
The option may also be set directly to an embedded GPG public key block. Special care is
needed to encode the empty line with leading spaces and ".":
Types: deb
URIs: https://deb.debian.org
Suites: stable
Components: main contrib non-free
Signed-By:
-----BEGIN PGP PUBLIC KEY BLOCK-----
.
mDMEYCQjIxYJKwYBBAHaRw8BAQdAD/P5Nvvnvk66SxBBHDbhRml9ORg1WV5CvzKY
CuMfoIS0BmFiY2RlZoiQBBMWCgA4FiEErCIG1VhKWMWo2yfAREZd5NfO31cFAmAk
IyMCGyMFCwkIBwMFFQoJCAsFFgIDAQACHgECF4AACgkQREZd5NfO31fbOwD6ArzS
dM0Dkd5h2Ujy1b6KcAaVW9FOa5UNfJ9FFBtjLQEBAJ7UyWD3dZzhvlaAwunsk7DG
3bHcln8DMpIJVXht78sL
=IE0r
-----END PGP PUBLIC KEY BLOCK-----
• Check-Valid-Until (check-valid-until) is a yes/no value which controls if APT should try to
detect replay attacks. A repository creator can declare a time until which the data provided
in the repository should be considered valid, and if this time is reached, but no new data
is provided, the data is considered expired and an error is raised. Besides increasing
security, as a malicious attacker can't send old data forever to prevent a user from
upgrading to a new version, this also helps users identify mirrors which are no longer
updated. However, some repositories such as historic archives are not updated any more by
design, so this check can be disabled by setting this option to no. Defaults to the value of
configuration option Acquire::Check-Valid-Until which itself defaults to yes.
• Valid-Until-Min (valid-until-min) and Valid-Until-Max (valid-until-max) can be used to raise
or lower the time period in seconds in which the data from this repository is considered
valid. -Max can be especially useful if the repository provides no Valid-Until field on its
Release file to set your own value, while -Min can be used to increase the valid time on
seldom updated (local) mirrors of a more frequently updated but less accessible archive
(which is in the sources.list as well) instead of disabling the check entirely. Default to
the value of the configuration options Acquire::Min-ValidTime and Acquire::Max-ValidTime
which are both unset by default.
• Check-Date (check-date) is a yes/no value which controls if APT should consider the
machine's time correct and hence perform time related checks, such as verifying that a
Release file is not from the future. Disabling it also disables the Check-Valid-Until option
mentioned above.
• Date-Max-Future (date-max-future) controls how far from the future a repository may be.
Default to the value of the configuration option Acquire::Max-FutureTime which is 10 seconds
by default.
• InRelease-Path (inrelease-path) determines the path to the InRelease file, relative to the
normal position of an InRelease file. By default, this option is unset and APT will try to
fetch an InRelease or, if that fails, a Release file and its associated Release.gpg file. By
setting this option, the specified path will be tried instead of the InRelease file, and the
fallback to Release files will be disabled.
URI SPECIFICATION
The currently recognized URI types are:
http (apt-transport-http(1))
The http scheme specifies an HTTP server for an archive and is the most commonly used
method. The URI can directly include login information if the archive requires it, but the
use of apt_auth.conf(5) should be preferred. The method also supports SOCKS5 and HTTP(S)
proxies either configured via apt-specific configuration or specified by the environment
variable http_proxy in the format (assuming an HTTP proxy requiring authentication)
http://user:pass@server:port/. The authentication details for proxies can also be supplied
via apt_auth.conf(5).
Note that these forms of authentication are insecure as the whole communication with the
remote server (or proxy) is not encrypted so a sufficiently capable attacker can observe and
record login as well as all other interactions. The attacker can not modify the
communication through as APT's data security model is independent of the chosen transport
method. See apt-secure(8) for details.
https (apt-transport-https(1))
The https scheme specifies an HTTPS server for an archive and is very similar in use and
available options to the http scheme. The main difference is that the communication between
apt and server (or proxy) is encrypted. Note that the encryption does not prevent an
attacker from knowing which server (or proxy) apt is communicating with and deeper analysis
can potentially still reveal which data was downloaded. If this is a concern the Tor-based
schemes mentioned further below might be a suitable alternative.
mirror, mirror+scheme (apt-transport-mirror(1))
The mirror scheme specifies the location of a mirrorlist. By default the scheme used for the
location is http, but any other scheme can be used via mirror+scheme. The mirrorlist itself
can contain many different URIs for mirrors the APT client can transparently pick, choose
and fallback between intended to help both with distributing the load over the available
mirrors and ensuring that clients can acquire data even if some configured mirrors are not
available.
file
The file scheme allows an arbitrary directory in the file system to be considered an
archive. This is useful for NFS mounts and local mirrors or archives.
cdrom
The cdrom scheme allows APT to use a local CD-ROM, DVD or USB drive with media swapping. Use
the apt-cdrom(8) program to create cdrom entries in the source list.
ftp
The ftp scheme specifies an FTP server for an archive. Use of FTP is on the decline in
favour of http and https and many archives either never offered or are retiring FTP access.
If you still need this method many configuration options for it are available in the
Acquire::ftp scope and detailed in apt.conf(5).
Please note that an FTP proxy can be specified by using the ftp_proxy environment variable.
It is possible to specify an HTTP proxy (HTTP proxy servers often understand FTP URLs) using
this environment variable and only this environment variable. Proxies using HTTP specified
in the configuration file will be ignored.
copy
The copy scheme is identical to the file scheme except that packages are copied into the
cache directory instead of used directly at their location. This is useful for people using
removable media to copy files around with APT.
rsh, ssh
The rsh/ssh method invokes RSH/SSH to connect to a remote host and access the files as a
given user. Prior configuration of rhosts or RSA keys is recommended. The standard find and
dd commands are used to perform the file transfers from the remote host.
adding more recognizable URI types
APT can be extended with more methods shipped in other optional packages, which should
follow the naming scheme apt-transport-method. For instance, the APT team also maintains the
package apt-transport-tor, which provides access methods for HTTP and HTTPS URIs routed via
the Tor network.
EXAMPLES
Uses the archive stored locally (or NFS mounted) at /home/apt/debian for stable/main,
stable/contrib, and stable/non-free.
deb file:/home/apt/debian stable main contrib non-free
Types: deb
URIs: file:/home/apt/debian
Suites: stable
Components: main contrib non-free
As above, except this uses the unstable (development) distribution.
deb file:/home/apt/debian unstable main contrib non-free
Types: deb
URIs: file:/home/apt/debian
Suites: unstable
Components: main contrib non-free
Sources specification for the above.
deb-src file:/home/apt/debian unstable main contrib non-free
Types: deb-src
URIs: file:/home/apt/debian
Suites: unstable
Components: main contrib non-free
The first line gets package information for the architectures in APT::Architectures while the
second always retrieves amd64 and armel.
deb http://deb.debian.org/debian bullseye main
deb [ arch=amd64,armel ] http://deb.debian.org/debian bullseye main
Types: deb
URIs: http://deb.debian.org/debian
Suites: bullseye
Components: main
Types: deb
URIs: http://deb.debian.org/debian
Suites: bullseye
Components: main
Architectures: amd64 armel
Uses HTTP to access the archive at archive.debian.org, and uses only the hamm/main area.
deb http://archive.debian.org/debian-archive hamm main
Types: deb
URIs: http://archive.debian.org/debian-archive
Suites: hamm
Components: main
Uses FTP to access the archive at ftp.debian.org, under the debian directory, and uses only the
bullseye/contrib area.
deb ftp://ftp.debian.org/debian bullseye contrib
Types: deb
URIs: ftp://ftp.debian.org/debian
Suites: bullseye
Components: contrib
Uses FTP to access the archive at ftp.debian.org, under the debian directory, and uses only the
unstable/contrib area. If this line appears as well as the one in the previous example in
sources.list a single FTP session will be used for both resource lines.
deb ftp://ftp.debian.org/debian unstable contrib
Types: deb
URIs: ftp://ftp.debian.org/debian
Suites: unstable
Components: contrib
Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe directory, and uses
only files found under unstable/binary-i386 on i386 machines, unstable/binary-amd64 on amd64,
and so forth for other supported architectures. [Note this example only illustrates how to use
the substitution variable; official debian archives are not structured like this]
deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/
Types: deb
URIs: http://ftp.tlh.debian.org/universe
Suites: unstable/binary-$(ARCH)/
Uses HTTP to get binary packages as well as sources from the stable, testing and unstable suites
and the components main and contrib.
deb http://deb.debian.org/debian stable main contrib
deb-src http://deb.debian.org/debian stable main contrib
deb http://deb.debian.org/debian testing main contrib
deb-src http://deb.debian.org/debian testing main contrib
deb http://deb.debian.org/debian unstable main contrib
deb-src http://deb.debian.org/debian unstable main contrib
Types: deb deb-src
URIs: http://deb.debian.org/debian
Suites: stable testing unstable
Components: main contrib
SEE ALSO
apt-get(8), apt.conf(5), /usr/share/doc/apt/acquire-additional-files.md.gz
BUGS
APT bug page[1]. If you wish to report a bug in APT, please see
/usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.
AUTHORS
Jason Gunthorpe
APT team
NOTES
1. APT bug page
http://bugs.debian.org/src:apt
APT 2.5.0 22 February 2022 SOURCES.LIST(5)
本文由 lnlidawei 原创、整理、转载,本文来自于【博客园】; 整理和转载的文章的版权归属于【原创作者】; 转载或引用时请【保留文章的来源信息】:https://www.cnblogs.com/lnlidawei/p/16307076.html