os：systemctl文档（二）systemd

 

 

systemd 文档

 

 

 

 

[root@rockylinux docs]# man    systemd

 

SYSTEMD(1)                                                        systemd                                                        SYSTEMD(1)

NAME
       systemd, init - systemd system and service manager

SYNOPSIS
       /usr/lib/systemd/systemd [OPTIONS...]

       init [OPTIONS...] {COMMAND}

DESCRIPTION
       systemd is a system and service manager for Linux operating systems. When run as first process on boot (as PID 1), it acts as init
       system that brings up and maintains userspace services.

       For compatibility with SysV, if systemd is called as init and a PID that is not 1, it will execute telinit and pass all command line
       arguments unmodified. That means init and telinit are mostly equivalent when invoked from normal login sessions. See telinit(8) for
       more information.

       When run as a system instance, systemd interprets the configuration file system.conf and the files in system.conf.d directories;
       when run as a user instance, systemd interprets the configuration file user.conf and the files in user.conf.d directories. See
       systemd-system.conf(5) for more information.

OPTIONS
       The following options are understood:

       --test
           Determine startup sequence, dump it and exit. This is an option useful for debugging only.

       --dump-configuration-items
           Dump understood unit configuration items. This outputs a terse but complete list of configuration items understood in unit
           definition files.

       --dump-bus-properties
           Dump exposed bus properties. This outputs a terse but complete list of properties exposed to dbus.

       --unit=
           Set default unit to activate on startup. If not specified, defaults to default.target.

       --system, --user
           For --system, tell systemd to run a system instance, even if the process ID is not 1, i.e. systemd is not run as init process.
           --user does the opposite, running a user instance even if the process ID is 1. Normally, it should not be necessary to pass
           these options, as systemd automatically detects the mode it is started in. These options are hence of little use except for
           debugging. Note that it is not supported booting and maintaining a full system with systemd running in --system mode, but PID
           not 1. In practice, passing --system explicitly is only useful in conjunction with --test.

       --dump-core
           Enable core dumping on crash. This switch has no effect when running as user instance. This setting may also be enabled during
           boot on the kernel command line via the systemd.dump_core= option, see below.

       --crash-vt=VT
           Switch to a specific virtual console (VT) on crash. Takes a positive integer in the range 1–63, or a boolean argument. If an
           integer is passed, selects which VT to switch to. If yes, the VT kernel messages are written to is selected. If no, no VT switch
           is attempted. This switch has no effect when running as user instance. This setting may also be enabled during boot, on the
           kernel command line via the systemd.crash_vt= option, see below.

       --crash-shell
           Run a shell on crash. This switch has no effect when running as user instance. This setting may also be enabled during boot, on
           the kernel command line via the systemd.crash_shell= option, see below.

       --crash-reboot
           Automatically reboot the system on crash. This switch has no effect when running as user instance. This setting may also be
           enabled during boot, on the kernel command line via the systemd.crash_reboot= option, see below.

       --confirm-spawn
           Ask for confirmation when spawning processes. This switch has no effect when run as user instance.

       --show-status=
           Takes a boolean argument or the special value auto. If on, terse unit status information is shown on the console during boot-up
           and shutdown. If off, no such status information is shown. If set to auto behavior is similar to off, except that it is
           automatically switched to on, as soon as the first unit failure or significant boot delay is encountered. This switch has no
           effect when invoked as user instance. If specified, overrides both the kernel command line setting systemd.show_status= (see
           below) and the configuration file option ShowStatus=, see systemd-system.conf(5).

       --log-target=
           Set log target. Argument must be one of console, journal, kmsg, journal-or-kmsg, null.

       --log-level=
           Set log level. As argument this accepts a numerical log level or the well-known syslog(3) symbolic names (lowercase): emerg,
           alert, crit, err, warning, notice, info, debug.

       --log-color=
           Highlight important log messages. Argument is a boolean value. If the argument is omitted, it defaults to true.

       --log-location=
           Include code location in log messages. This is mostly relevant for debugging purposes. Argument is a boolean value. If the
           argument is omitted it defaults to true.

       --default-standard-output=, --default-standard-error=
           Sets the default output or error output for all services and sockets, respectively. That is, controls the default for
           StandardOutput= and StandardError= (see systemd.exec(5) for details). Takes one of inherit, null, tty, journal, journal+console,
           syslog, syslog+console, kmsg, kmsg+console. If the argument is omitted --default-standard-output= defaults to journal and
           --default-standard-error= to inherit.

       --machine-id=
           Override the machine-id set on the hard drive, useful for network booting or for containers. May not be set to all zeros.

       --service-watchdogs=
           Globally enable/disable all service watchdog timeouts and emergency actions. This setting may also be specified during boot, on
           the kernel command line via the systemd.service_watchdogs= option, see below. Defaults to enabled.

       -h, --help
           Print a short help text and exit.

       --version
           Print a short version string and exit.

CONCEPTS
       systemd provides a dependency system between various entities called "units" of 11 different types. Units encapsulate various
       objects that are relevant for system boot-up and maintenance. The majority of units are configured in unit configuration files,
       whose syntax and basic set of options is described in systemd.unit(5), however some are created automatically from other
       configuration, dynamically from system state or programmatically at runtime. Units may be "active" (meaning started, bound, plugged
       in, ..., depending on the unit type, see below), or "inactive" (meaning stopped, unbound, unplugged, ...), as well as in the process
       of being activated or deactivated, i.e. between the two states (these states are called "activating", "deactivating"). A special
       "failed" state is available as well, which is very similar to "inactive" and is entered when the service failed in some way (process
       returned error code on exit, or crashed, an operation timed out, or after too many restarts). If this state is entered, the cause
       will be logged, for later reference. Note that the various unit types may have a number of additional substates, which are mapped to
       the five generalized unit states described here.

       The following unit types are available:

        1. Service units, which start and control daemons and the processes they consist of. For details, see systemd.service(5).

        2. Socket units, which encapsulate local IPC or network sockets in the system, useful for socket-based activation. For details
           about socket units, see systemd.socket(5), for details on socket-based activation and other forms of activation, see daemon(7).

        3. Target units are useful to group units, or provide well-known synchronization points during boot-up, see systemd.target(5).

        4. Device units expose kernel devices in systemd and may be used to implement device-based activation. For details, see
           systemd.device(5).

        5. Mount units control mount points in the file system, for details see systemd.mount(5).

        6. Automount units provide automount capabilities, for on-demand mounting of file systems as well as parallelized boot-up. See
           systemd.automount(5).

        7. Timer units are useful for triggering activation of other units based on timers. You may find details in systemd.timer(5).

        8. Swap units are very similar to mount units and encapsulate memory swap partitions or files of the operating system. They are
           described in systemd.swap(5).

        9. Path units may be used to activate other services when file system objects change or are modified. See systemd.path(5).

       10. Slice units may be used to group units which manage system processes (such as service and scope units) in a hierarchical tree
           for resource management purposes. See systemd.slice(5).

       11. Scope units are similar to service units, but manage foreign processes instead of starting them as well. See systemd.scope(5).

       Units are named as their configuration files. Some units have special semantics. A detailed list is available in systemd.special(7).

       systemd knows various kinds of dependencies, including positive and negative requirement dependencies (i.e.  Requires= and
       Conflicts=) as well as ordering dependencies (After= and Before=). NB: ordering and requirement dependencies are orthogonal. If only
       a requirement dependency exists between two units (e.g.  foo.service requires bar.service), but no ordering dependency (e.g.
       foo.service after bar.service) and both are requested to start, they will be started in parallel. It is a common pattern that both
       requirement and ordering dependencies are placed between two units. Also note that the majority of dependencies are implicitly
       created and maintained by systemd. In most cases, it should be unnecessary to declare additional dependencies manually, however it
       is possible to do this.

       Application programs and units (via dependencies) may request state changes of units. In systemd, these requests are encapsulated as
       'jobs' and maintained in a job queue. Jobs may succeed or can fail, their execution is ordered based on the ordering dependencies of
       the units they have been scheduled for.

       On boot systemd activates the target unit default.target whose job is to activate on-boot services and other on-boot units by
       pulling them in via dependencies. Usually, the unit name is just an alias (symlink) for either graphical.target (for fully-featured
       boots into the UI) or multi-user.target (for limited console-only boots for use in embedded or server environments, or similar; a
       subset of graphical.target). However, it is at the discretion of the administrator to configure it as an alias to any other target
       unit. See systemd.special(7) for details about these target units.

       Processes systemd spawns are placed in individual Linux control groups named after the unit which they belong to in the private
       systemd hierarchy. (see cgroups.txt[1] for more information about control groups, or short "cgroups"). systemd uses this to
       effectively keep track of processes. Control group information is maintained in the kernel, and is accessible via the file system
       hierarchy (beneath /sys/fs/cgroup/systemd/), or in tools such as systemd-cgls(1) or ps(1) (ps xawf -eo pid,user,cgroup,args is
       particularly useful to list all processes and the systemd units they belong to.).

       systemd is compatible with the SysV init system to a large degree: SysV init scripts are supported and simply read as an alternative
       (though limited) configuration file format. The SysV /dev/initctl interface is provided, and compatibility implementations of the
       various SysV client tools are available. In addition to that, various established Unix functionality such as /etc/fstab or the utmp
       database are supported.

       systemd has a minimal transaction system: if a unit is requested to start up or shut down it will add it and all its dependencies to
       a temporary transaction. Then, it will verify if the transaction is consistent (i.e. whether the ordering of all units is
       cycle-free). If it is not, systemd will try to fix it up, and removes non-essential jobs from the transaction that might remove the
       loop. Also, systemd tries to suppress non-essential jobs in the transaction that would stop a running service. Finally it is checked
       whether the jobs of the transaction contradict jobs that have already been queued, and optionally the transaction is aborted then.
       If all worked out and the transaction is consistent and minimized in its impact it is merged with all already outstanding jobs and
       added to the run queue. Effectively this means that before executing a requested operation, systemd will verify that it makes sense,
       fixing it if possible, and only failing if it really cannot work.

       systemd contains native implementations of various tasks that need to be executed as part of the boot process. For example, it sets
       the hostname or configures the loopback network device. It also sets up and mounts various API file systems, such as /sys or /proc.

       For more information about the concepts and ideas behind systemd, please refer to the Original Design Document[2].

       Note that some but not all interfaces provided by systemd are covered by the Interface Stability Promise[3].

       Units may be generated dynamically at boot and system manager reload time, for example based on other configuration files or
       parameters passed on the kernel command line. For details, see systemd.generator(7).

       Systems which invoke systemd in a container or initrd environment should implement the Container Interface[4] or initrd Interface[5]
       specifications, respectively.

DIRECTORIES
       System unit directories
           The systemd system manager reads unit configuration from various directories. Packages that want to install unit files shall
           place them in the directory returned by pkg-config systemd --variable=systemdsystemunitdir. Other directories checked are
           /usr/local/lib/systemd/system and /usr/lib/systemd/system. User configuration always takes precedence.  pkg-config systemd
           --variable=systemdsystemconfdir returns the path of the system configuration directory. Packages should alter the content of
           these directories only with the enable and disable commands of the systemctl(1) tool. Full list of directories is provided in
           systemd.unit(5).

       User unit directories
           Similar rules apply for the user unit directories. However, here the XDG Base Directory specification[6] is followed to find
           units. Applications should place their unit files in the directory returned by pkg-config systemd --variable=systemduserunitdir.
           Global configuration is done in the directory reported by pkg-config systemd --variable=systemduserconfdir. The enable and
           disable commands of the systemctl(1) tool can handle both global (i.e. for all users) and private (for one user)
           enabling/disabling of units. Full list of directories is provided in systemd.unit(5).

       SysV init scripts directory
           The location of the SysV init script directory varies between distributions. If systemd cannot find a native unit file for a
           requested service, it will look for a SysV init script of the same name (with the .service suffix removed).

       SysV runlevel link farm directory
           The location of the SysV runlevel link farm directory varies between distributions. systemd will take the link farm into account
           when figuring out whether a service shall be enabled. Note that a service unit with a native unit configuration file cannot be
           started by activating it in the SysV runlevel link farm.

SIGNALS
       SIGTERM
           Upon receiving this signal the systemd system manager serializes its state, reexecutes itself and deserializes the saved state
           again. This is mostly equivalent to systemctl daemon-reexec.

           systemd user managers will start the exit.target unit when this signal is received. This is mostly equivalent to systemctl
           --user start exit.target --job-mode=replace-irreversible.

       SIGINT
           Upon receiving this signal the systemd system manager will start the ctrl-alt-del.target unit. This is mostly equivalent to
           systemctl start ctrl-alt-del.target --job-mode=replace-irreversible. If this signal is received more than 7 times per 2s, an
           immediate reboot is triggered. Note that pressing Ctrl-Alt-Del on the console will trigger this signal. Hence, if a reboot is
           hanging, pressing Ctrl-Alt-Del more than 7 times in 2s is a relatively safe way to trigger an immediate reboot.

           systemd user managers treat this signal the same way as SIGTERM.

       SIGWINCH
           When this signal is received the systemd system manager will start the kbrequest.target unit. This is mostly equivalent to
           systemctl start kbrequest.target.

           This signal is ignored by systemd user managers.

       SIGPWR
           When this signal is received the systemd manager will start the sigpwr.target unit. This is mostly equivalent to systemctl start
           sigpwr.target.

       SIGUSR1
           When this signal is received the systemd manager will try to reconnect to the D-Bus bus.

       SIGUSR2
           When this signal is received the systemd manager will log its complete state in human-readable form. The data logged is the same
           as printed by systemd-analyze dump.

       SIGHUP
           Reloads the complete daemon configuration. This is mostly equivalent to systemctl daemon-reload.

       SIGRTMIN+0
           Enters default mode, starts the default.target unit. This is mostly equivalent to systemctl isolate default.target.

       SIGRTMIN+1
           Enters rescue mode, starts the rescue.target unit. This is mostly equivalent to systemctl isolate rescue.target.

       SIGRTMIN+2
           Enters emergency mode, starts the emergency.service unit. This is mostly equivalent to systemctl isolate emergency.service.

       SIGRTMIN+3
           Halts the machine, starts the halt.target unit. This is mostly equivalent to systemctl start halt.target
           --job-mode=replace-irreversible.

       SIGRTMIN+4
           Powers off the machine, starts the poweroff.target unit. This is mostly equivalent to systemctl start poweroff.target
           --job-mode=replace-irreversible.

       SIGRTMIN+5
           Reboots the machine, starts the reboot.target unit. This is mostly equivalent to systemctl start reboot.target
           --job-mode=replace-irreversible.

       SIGRTMIN+6
           Reboots the machine via kexec, starts the kexec.target unit. This is mostly equivalent to systemctl start kexec.target
           --job-mode=replace-irreversible.

       SIGRTMIN+13
           Immediately halts the machine.

       SIGRTMIN+14
           Immediately powers off the machine.

       SIGRTMIN+15
           Immediately reboots the machine.

       SIGRTMIN+16
           Immediately reboots the machine with kexec.

       SIGRTMIN+20
           Enables display of status messages on the console, as controlled via systemd.show_status=1 on the kernel command line.

       SIGRTMIN+21
           Disables display of status messages on the console, as controlled via systemd.show_status=0 on the kernel command line.

       SIGRTMIN+22
           Sets the service manager's log level to "debug", in a fashion equivalent to systemd.log_level=debug on the kernel command line.

       SIGRTMIN+23
           Restores the log level to its configured value. The configured value is derived from – in order of priority – the value
           specified with systemd.log-level= on the kernel command line, or the value specified with LogLevel= in the configuration file,
           or the built-in default of "info".

       SIGRTMIN+24
           Immediately exits the manager (only available for --user instances).

       SIGRTMIN+26
           Restores the log target to its configured value. The configured value is derived from – in order of priority – the value
           specified with systemd.log-target= on the kernel command line, or the value specified with LogTarget= in the configuration file,
           or the built-in default.

       SIGRTMIN+27, SIGRTMIN+28
           Sets the log target to "console" on SIGRTMIN+27 (or "kmsg" on SIGRTMIN+28), in a fashion equivalent to
           systemd.log_target=console (or systemd.log_target=kmsg on SIGRTMIN+28) on the kernel command line.

ENVIRONMENT
       $SYSTEMD_LOG_LEVEL
           systemd reads the log level from this environment variable. This can be overridden with --log-level=.

       $SYSTEMD_LOG_TARGET
           systemd reads the log target from this environment variable. This can be overridden with --log-target=.

       $SYSTEMD_LOG_COLOR
           Controls whether systemd highlights important log messages. This can be overridden with --log-color=.

       $SYSTEMD_LOG_LOCATION
           Controls whether systemd prints the code location along with log messages. This can be overridden with --log-location=.

       $XDG_CONFIG_HOME, $XDG_CONFIG_DIRS, $XDG_DATA_HOME, $XDG_DATA_DIRS
           The systemd user manager uses these variables in accordance to the XDG Base Directory specification[6] to find its
           configuration.

       $SYSTEMD_UNIT_PATH
           Controls where systemd looks for unit files.

       $SYSTEMD_SYSVINIT_PATH
           Controls where systemd looks for SysV init scripts.

       $SYSTEMD_SYSVRCND_PATH
           Controls where systemd looks for SysV init script runlevel link farms.

       $SYSTEMD_COLORS
           The value must be a boolean. Controls whether colorized output should be generated. This can be specified to override the
           decision that systemd makes based on $TERM and what the console is connected to.

       $SYSTEMD_URLIFY
           The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators
           supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.

       $LISTEN_PID, $LISTEN_FDS, $LISTEN_FDNAMES
           Set by systemd for supervised processes during socket-based activation. See sd_listen_fds(3) for more information.

       $NOTIFY_SOCKET
           Set by systemd for supervised processes for status and start-up completion notification. See sd_notify(3) for more information.

KERNEL COMMAND LINE
       When run as system instance systemd parses a number of kernel command line arguments[7]:

       systemd.unit=, rd.systemd.unit=
           Overrides the unit to activate on boot. Defaults to default.target. This may be used to temporarily boot into a different boot
           unit, for example rescue.target or emergency.service. See systemd.special(7) for details about these units. The option prefixed
           with "rd."  is honored only in the initial RAM disk (initrd), while the one that is not prefixed only in the main system.

       systemd.dump_core
           Takes a boolean argument or enables the option if specified without an argument. If enabled, the systemd manager (PID 1) dumps
           core when it crashes. Otherwise, no core dump is created. Defaults to enabled.

       systemd.crash_chvt
           Takes a positive integer, or a boolean argument. Can be also specified without an argument, with the same effect as a positive
           boolean. If a positive integer (in the range 1–63) is specified, the system manager (PID 1) will activate the specified virtual
           terminal (VT) when it crashes. Defaults to disabled, meaning that no such switch is attempted. If set to enabled, the VT the
           kernel messages are written to is selected.

       systemd.crash_shell
           Takes a boolean argument or enables the option if specified without an argument. If enabled, the system manager (PID 1) spawns a
           shell when it crashes, after a 10s delay. Otherwise, no shell is spawned. Defaults to disabled, for security reasons, as the
           shell is not protected by password authentication.

       systemd.crash_reboot
           Takes a boolean argument or enables the option if specified without an argument. If enabled, the system manager (PID 1) will
           reboot the machine automatically when it crashes, after a 10s delay. Otherwise, the system will hang indefinitely. Defaults to
           disabled, in order to avoid a reboot loop. If combined with systemd.crash_shell, the system is rebooted after the shell exits.

       systemd.confirm_spawn
           Takes a boolean argument or a path to the virtual console where the confirmation messages should be emitted. Can be also
           specified without an argument, with the same effect as a positive boolean. If enabled, the system manager (PID 1) asks for
           confirmation when spawning processes using /dev/console. If a path or a console name (such as "ttyS0") is provided, the virtual
           console pointed to by this path or described by the give name will be used instead. Defaults to disabled.

       systemd.service_watchdogs=
           Takes a boolean argument. If disabled, all service runtime watchdogs (WatchdogSec=) and emergency actions (e.g.  OnFailure= or
           StartLimitAction=) are ignored by the system manager (PID 1); see systemd.service(5). Defaults to enabled, i.e. watchdogs and
           failure actions are processed normally. The hardware watchdog is not affected by this option.

       systemd.show_status
           Takes a boolean argument or the constant auto. Can be also specified without an argument, with the same effect as a positive
           boolean. If enabled, the systemd manager (PID 1) shows terse service status updates on the console during bootup.  auto behaves
           like false until a unit fails or there is a significant delay in boot. Defaults to enabled, unless quiet is passed as kernel
           command line option, in which case it defaults to auto. If specified overrides the system manager configuration file option
           ShowStatus=, see systemd-system.conf(5). However, the process command line option --show-status= takes precedence over both this
           kernel command line option and the configuration file option.

       systemd.log_target=, systemd.log_level=, systemd.log_location=, systemd.log_color
           Controls log output, with the same effect as the $SYSTEMD_LOG_TARGET, $SYSTEMD_LOG_LEVEL, $SYSTEMD_LOG_LOCATION,
           $SYSTEMD_LOG_COLOR environment variables described above.  systemd.log_color can be specified without an argument, with the same
           effect as a positive boolean.

       systemd.default_standard_output=, systemd.default_standard_error=
           Controls default standard output and error output for services, with the same effect as the --default-standard-output= and
           --default-standard-error= command line arguments described above, respectively.

       systemd.setenv=
           Takes a string argument in the form VARIABLE=VALUE. May be used to set default environment variables to add to forked child
           processes. May be used more than once to set multiple variables.

       systemd.machine_id=
           Takes a 32 character hex value to be used for setting the machine-id. Intended mostly for network booting where the same
           machine-id is desired for every boot.

       systemd.unified_cgroup_hierarchy
           When specified without an argument or with a true argument, enables the usage of unified cgroup hierarchy[8]
           (a.k.a. cgroups-v2). When specified with a false argument, fall back to hybrid or full legacy cgroup hierarchy.

           If this option is not specified, the default behaviour is determined during compilation (the --with-default-hierarchy= option).
           If the kernel does not support unified cgroup hierarchy, the legacy hierarchy will be used even if this option is specified.

       systemd.legacy_systemd_cgroup_controller
           Takes effect if the full unified cgroup hierarchy is not used (see previous option). When specified without an argument or with
           a true argument, disables the use of "hybrid" cgroup hierarchy (i.e. a cgroups-v2 tree used for systemd, and legacy cgroup
           hierarchy[9], a.k.a. cgroups-v1, for other controllers), and forces a full "legacy" mode. When specified with a false argument,
           enables the use of "hybrid" hierarchy.

           If this option is not specified, the default behaviour is determined during compilation (the --with-default-hierarchy= option).
           If the kernel does not support unified cgroup hierarchy, the legacy hierarchy will be used even if this option is specified.

       quiet
           Turn off status output at boot, much like systemd.show_status=false would. Note that this option is also read by the kernel
           itself and disables kernel log output. Passing this option hence turns off the usual output from both the system manager and the
           kernel.

       debug
           Turn on debugging output. This is equivalent to systemd.log_level=debug. Note that this option is also read by the kernel itself
           and enables kernel debug output. Passing this option hence turns on the debug output from both the system manager and the
           kernel.

       emergency, rd.emergency, -b
           Boot into emergency mode. This is equivalent to systemd.unit=emergency.target or rd.systemd.unit=emergency.target, respectively,
           and provided for compatibility reasons and to be easier to type.

       rescue, rd.rescue, single, s, S, 1
           Boot into rescue mode. This is equivalent to systemd.unit=rescue.target or rd.systemd.unit=rescue.target, respectively, and
           provided for compatibility reasons and to be easier to type.

       2, 3, 4, 5
           Boot into the specified legacy SysV runlevel. These are equivalent to systemd.unit=runlevel2.target,
           systemd.unit=runlevel3.target, systemd.unit=runlevel4.target, and systemd.unit=runlevel5.target, respectively, and provided for
           compatibility reasons and to be easier to type.

       locale.LANG=, locale.LANGUAGE=, locale.LC_CTYPE=, locale.LC_NUMERIC=, locale.LC_TIME=, locale.LC_COLLATE=, locale.LC_MONETARY=,
       locale.LC_MESSAGES=, locale.LC_PAPER=, locale.LC_NAME=, locale.LC_ADDRESS=, locale.LC_TELEPHONE=, locale.LC_MEASUREMENT=,
       locale.LC_IDENTIFICATION=
           Set the system locale to use. This overrides the settings in /etc/locale.conf. For more information, see locale.conf(5) and
           locale(7).

       For other kernel command line parameters understood by components of the core OS, please refer to kernel-command-line(7).

SOCKETS AND FIFOS
       /run/systemd/notify
           Daemon status notification socket. This is an AF_UNIX datagram socket and is used to implement the daemon notification logic as
           implemented by sd_notify(3).

       /run/systemd/private
           Used internally as communication channel between systemctl(1) and the systemd process. This is an AF_UNIX stream socket. This
           interface is private to systemd and should not be used in external projects.

       /dev/initctl
           Limited compatibility support for the SysV client interface, as implemented by the systemd-initctl.service unit. This is a named
           pipe in the file system. This interface is obsolete and should not be used in new applications.

SEE ALSO
       The systemd Homepage[10], systemd-system.conf(5), locale.conf(5), systemctl(1), journalctl(1), systemd-notify(1), daemon(7), sd-
       daemon(3), systemd.unit(5), systemd.special(5), pkg-config(1), kernel-command-line(7), bootup(7), systemd.directives(7)

NOTES
        1. cgroups.txt
           https://www.kernel.org/doc/Documentation/cgroup-v1/cgroups.txt

        2. Original Design Document
           http://0pointer.de/blog/projects/systemd.html

        3. Interface Stability Promise
           https://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise

        4. Container Interface
           https://www.freedesktop.org/wiki/Software/systemd/ContainerInterface

        5. initrd Interface
           https://www.freedesktop.org/wiki/Software/systemd/InitrdInterface

        6. XDG Base Directory specification
           http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

        7. If run inside a Linux container these arguments may be passed as command line arguments to systemd itself, next to any of the
           command line options listed in the Options section above. If run outside of Linux containers, these arguments are parsed from
           /proc/cmdline instead.

        8. unified cgroup hierarchy
           https://www.kernel.org/doc/Documentation/cgroup-v2.txt

        9. legacy cgroup hierarchy
           https://www.kernel.org/doc/Documentation/cgroup-v1/

       10. systemd Homepage
           https://www.freedesktop.org/wiki/Software/systemd/

systemd 239                                                                                                                      SYSTEMD(1)