MariaDB10源码安装
源码安装MariaDB10
官方网站
http://mirrors.ctyun.cn/MariaDB/
环境：CentOS6.5 x64一.准备编译环境
1.卸载linux预装的mysql-libs
rpm -e --nodeps mysql-libs
2.安装编译必备工具及库
yum -y install gcc gcc-c++
libaio-devel pam-devel
libnl-devel popt-devel
popt-static
二、安装MariaDB
1.下载相关软件源码包
wget --no-check-certificate http://mirrors.neusoft.edu.cn/mariadb/mariadb-10.0.14/source/mariadb-10.0.14.tar.gz2.建mysql服务的用户和用户组
[root@node2 rhel6]# groupadd mysql[root@node2 rhel6]# useradd -s /sbin/nologin -g mysql -M mysql
[root@node2 rhel6]# id mysql
uid=500(mysql) gid=500(mysql) groups=500(mysql)
3.解压mariadb到临时安装目录，通常放在/usr/local/src目录下
[root@node2 ~]# ls
mariadb-10.0.14.tar.gz
[root@node2 ~]# tar -xvf mariadb-10.0.14.tar.gz -C
/usr/local/src/
4.通过cmake编译安装
[root@node2 ~]# cd /usr/local/src/mariadb-10.0.14/
[root@node2 mariadb-10.0.14]# mkdir rhel6
[root@node2 mariadb-10.0.14]# cd rhel6/
[root@node2 rhel6]# cmake
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql
\
-DMYSQL_UNIX_ADDR=/var/lib/mysql/mysql.sock \
-DMYSQL_DATADIR=/var/lib/mysql \
-DSYSCONFDIR=/etc \
-DMYSQL_USER=mysql \
-DMYSQL_TCP_PORT=3306 \
-DWITH_XTRADB_STORAGE_ENGINE=1 \
-DWITH_INNOBASE_STORAGE_ENGINE=1 \
-DWITH_PARTITION_STORAGE_ENGINE=1 \
-DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
-DWITH_MYISAM_STORAGE_ENGINE=1 \
-DWITH_READLINE=1 \
-DENABLED_LOCAL_INFILE=1 \
-DWITH_EXTRA_CHARSETS=1 \
-DWITH_BIG_TABLES=1 \
-DWITH_EMBEDDED_SERVER=1 \
-DWITH_DEBUG=0 \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci \
-DEXTRA_CHARSETS=all \
-DWITH_SSL=system
[root@node2 rhel6]# make && make install
三.配置MariaDB
1.将mysql管理调式工具添加到PATH路径
[root@node2 ~]# echo 'PATH=$PATH:/usr/local/mysql/bin' >>/etc/profile[root@node2 ~]# source /etc/profile
顺道也加一个man记录
[root@node2 ~]# ls /usr/local/mysql/man/
man1
[root@node2 ~]# echo MANPATH /usr/local/mysql/man
>>/etc/man.config
[root@node2 ~]# /usr/local/mysql/scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql --datadir=/var/lib/mysql
WARNING: The host 'node2' could not be looked up with resolveip.
This probably means that your libc libraries are not 100 % compatible
with this binary MariaDB version. The MariaDB daemon, mysqld, should work
normally with the exception that host name resolving will not work.
This means that you should use IP addresses instead of hostnames
when specifying MariaDB privileges !
Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...
141124 14:40:26 [Note] InnoDB: Using mutexes to ref count buffer pool pages
141124 14:40:26 [Note] InnoDB: The InnoDB memory heap is disabled
141124 14:40:26 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
... ...
Please report any problems at http://mariadb.org/jira
The latest information about MariaDB is available at http://mariadb.org/.
You can find additional information about the MySQL part at:
http://dev.mysql.com
Support MariaDB development by buying support/new features from
SkySQL Ab. You can contact us about this at sales@skysql.com.
Alternatively consider joining our community based development effort:
http://mariadb.com/kb/en/contributing-to-the-mariadb-project/
3.配置/etc/my.cnf和/etc/init.d/mysql
[root@node2 ~]# cp
/usr/local/src/mariadb-10.0.14/rhel6/support-files/my-huge.cnf
/etc/my.cnf
[root@node2 ~]# cat /etc/my.cnf
# Example MariaDB config file for very
large systems.
#
# This is for a large system with memory of 1G-2G where the system
runs mainly
# MariaDB.
#
# MariaDB programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, do:
# 'my_print_defaults --help' and see what is printed under
# Default options are read from the following files in the given
order:
# More information at:
http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program
supports.
# If you want to know which options a program supports, run the
program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password
port
socket
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port
socket
log-error
pid-file
skip-external-locking
key_buffer_size = 384M
max_allowed_packet = 1M
table_open_cache = 512
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
# Point the following paths to a dedicated disk
#tmpdir
# Don't listen on a TCP/IP port at all. This can be a security
enhancement,
# if all processes that need to connect to mysqld run on the same
host.
# All interaction with mysqld must be made via Unix sockets or
named pipes.
# Note that using this option without enabling named pipes on
Windows
# (via the "enable-named-pipe" option) will render mysqld
useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose
between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our
manual) -
#
#
#
#
#
#
#
#
#
#
#
#
#
# OR
#
# 2) Set the variables below. However, in case you choose this
method, then
#
#
#
#
#
#
#
#
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id
#
# The replication master for this slave - required
#master-host
#
# The username the slave will use for authentication when
connecting
# to the master - required
#master-user
#
# The password the slave will authenticate with when connecting
to
# the master - required
#master-password =
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
#
# binary logging format - mixed recommended
#binlog_format=mixed
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql
#innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 384M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 100M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with
SQL
#safe-updates
[myisamchk]
key_buffer_size = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
##Log
log_error = /var/log/mysql/mysqld-error.log
long_query_time = 1
slow_query_log
slow_query_log_file = /var/log/mysql/mysqld-slow.log
##Other
#max_connections = 1000
#open_files_limit = 65535
[root@node2 ~]# cp
/usr/local/src/mariadb-10.0.14/rhel6/support-files/mysql.server
/etc/init.d/mysql
[root@node2 ~]# chmod +x /etc/init.d/mysql
[root@node2 ~]# ll /etc/init.d/mysql
-rwxr-xr-x. 1 root root 12055 Nov 24 14:25 /etc/init.d/mysql
4.启服务
[root@node2 ~]# /etc/init.d/mysql startStarting MySQL. SUCCESS!
[root@node2 ~]# /etc/init.d/mysql status
[root@node2 ~]# netstat -tunlp|grep mysqld
tcp
[root@node2 ~]# chkconfig mysql on
[root@node2 ~]# chkconfig --list mysql
mysql
5.安全设置
[root@rhel7-test1 ~]# mysql_secure_installation
/usr/local/mysql/bin/mysql_secure_installation: line 379:
find_mysql_client: command not found
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL
MariaDB
In order to log into MariaDB to secure it, we'll need the current
password for the root user.
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none):
OK, successfully used password, moving on...
初次使用密码为空，这里直接回车即可
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
这里设置mariadb的root密码
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.
go a bit smoother.
production environment.
Remove anonymous users? [Y/n] y
删除匿名用户
Normally, root should only be allowed to connect from 'localhost'.
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] y
不允许mariadb root用户远程登录
By default, MariaDB comes with a database named 'test' that anyone can
access.
before moving into a production environment.
Remove test database and access to it? [Y/n] y
删除test数据库
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
权限下发
Cleaning up...
All done!
installation should now be secure.
Thanks for using MariaDB!
也可以手动完成，
mysql -e "grant all privileges on *.* to 'root'@'127.0.0.1' identified by 'dbrootpwd' with grant option;"四.测试
mysql -e "grant all privileges on *.* to 'root'@'localhost' identified by 'dbrootpwd' with grant option;"
mysql -uroot -pdbrootpwd -e "delete from mysql.user where Password='';"
mysql -uroot -pdbrootpwd -e "delete from mysql.db where User='';"
mysql -uroot -pdbrootpwd -e "drop database test;"
[root@node2 ~]# mysql -u root -p
Enter password:
Welcome to the MariaDB monitor.
Your MariaDB connection id is 12
Server version: 10.0.14-MariaDB-log Source distribution
Copyright (c) 2000, 2014, Oracle, SkySQL Ab and others.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
MariaDB [(none)]> show databases;
+--------------------+
| Database
+--------------------+
| information_schema |
| mysql
| performance_schema |
+--------------------+
3 rows in set (0.01 sec)
MariaDB [(none)]> show engines;
+--------------------+---------+----------------------------------------------------------------------------+--------------+------+------------+
| Engine
+--------------------+---------+----------------------------------------------------------------------------+--------------+------+------------+
| MRG_MyISAM