1 * ball.hdev: Inspection of Ball Bonding
2 * 球接合检查 Comment Time:2014/9/10
3 *核心思想：1.白色区域用作自动ROI，黑色区域是目标
4 * 2.Opening_circle:圆形开算子是关键
5 *关闭窗口刷新，关闭窗口，打开窗口[728,512]
6 dev_update_window ('off')
7 dev_close_window ()
8 dev_open_window (0, 0, 728, 512, 'black', WindowID)
9 *读取图像并显示
10 read_image (Bond, 'die/die_03')
11 dev_display (Bond)
12 set_display_font (WindowID, 14, 'mono', 'true', 'false')
13 *显示F5提示信息并暂停
14 disp_continue_message (WindowID, 'black', 'true')
15 stop ()
16 *固定二值化，取白色区域部分
17 threshold (Bond, Bright, 100, 255)
18 *将所有区域变换成最小的外接矩形，相当于做ROI
19 shape_trans (Bright, Die, 'rectangle2')
20 *设置显示方式：绿色，边缘模式，线条宽度3
21 dev_set_color ('green')
22 dev_set_line_width (3)
23 dev_set_draw ('margin')
24 dev_display (Die)
25 disp_continue_message (WindowID, 'black', 'true')
26 stop ()
27 *利用生成的外接矩形做ROI
28 reduce_domain (Bond, Die, DieGrey)
29 *在ROI中二值化取黑色区域，并按面积标准填充
30 threshold (DieGrey, Wires, 0, 50)
31 fill_up_shape (Wires, WiresFilled, 'area', 1, 100)
32 *设置显示模式：填充模式，红色
33 dev_display (Bond)
34 dev_set_draw ('fill')
35 dev_set_color ('red')
36 dev_display (WiresFilled)
37 disp_continue_message (WindowID, 'black', 'true')
38 stop ()
39 *圆形式的开运算：先腐蚀后膨胀，消除颗粒(精髓算子)
40 opening_circle (WiresFilled, Balls, 15.5)
41 dev_set_color ('green')
42 dev_display (Balls)
43 disp_continue_message (WindowID, 'black', 'true')
44 stop ()
45 *单个区域连接成区域数组
46 connection (Balls, SingleBalls)
47 *按圆度来进行区域的筛选,完成定位功能
48 select_shape (SingleBalls, IntermediateBalls, 'circularity', 'and', 0.85, 1.0)
49 *已OK的区域进行从左至右排序
50 sort_region (IntermediateBalls, FinalBalls, 'first_point', 'true', 'column')
51 dev_display (Bond)
52 dev_set_colored (12)
53 dev_display (FinalBalls)
54 disp_continue_message (WindowID, 'black', 'true')
55 stop ()
56 *求区域的最小外接圆
57 smallest_circle (FinalBalls, Row, Column, Radius)
58 NumBalls := |Radius|
59 Diameter := 2*Radius
60 meanDiameter := sum(Diameter)/NumBalls
61 mimDiameter := min(Diameter)
62 dev_display (Bond)
63 *显示最小外接圆
64 disp_circle (WindowID, Row, Column, Radius)
65 *书写文字标识
66 dev_set_color ('white')
67 for i := 1 to NumBalls by 1
68 if (fmod(i,2)=1)
69 disp_message (WindowID, 'D: '+Diameter[i-1], 'image', Row[i-1]-2.7*Radius[i-1], max([Column[i-1]-60,0]), 'white', 'false')
70 else
71 disp_message (WindowID, 'D: '+Diameter[i-1], 'image', Row[i-1]+1.2*Radius[i-1], max([Column[i-1]-60,0]), 'white', 'false')
72 endif
73 endfor
74 *关闭窗口
75 * dump_window (WindowID, 'tiff_rgb', './ball')
76 dev_set_color ('green')
77 dev_update_window ('on')
78 disp_continue_message (WindowID, 'black', 'true')
79 stop ()
80 dev_close_window ()
