问:怎么才能关掉一个用任务管理器关不了的进程?
我前段时间发现我的机子里多了一个进程,只要开机就在,我用任务管理器却怎么关也关不了

答:1.杀进程很容易,随便找个工具都行。比如IceSword。
关键是找到这个进程的启动方式,不然下次重启它又出来了。

顺便教大家一招狠的。其实用Windows自带的工具就能杀大部分进程:
c:\>ntsd -c q -p PID

只有System、SMSS.EXE和CSRSS.EXE不能杀。
前两个是纯内核态的,最后那个是Win32子系统,ntsd本身需要它。

ntsd从2000开始就是系统自带的用户态调试工具。被调试器附着(attach)的进程会随调试器一起退出,所以可以用来在命令行下终止进程。使用ntsd自动就获得了debug权限,从而能杀掉大部分的进程。

ntsd会新开一个调试窗口,本来在纯命令行下无法控制,但如果只是简单的命令,比如退出(q),用-c参数从命令行传递就行了。

NtsdNtsd 按照惯例也向软件开发人员提供。只有系统开发人员使用此命令。有关详细信息,请参阅 NTSD 中所附的帮助文件。

 

usage: ntsd [-?] [-2] [-d] [-g] [-G] [-myob] [-lines] [-n] [-o] [-s] [-v] [-w]
            [-r BreakErrorLevel]  [-t PrintErrorLevel]
            [-hd] [-pd] [-pe] [-pt #] [-pv] [-x | -x{e|d|n|i} ]
            [-- | -p pid | -pn name | command-line | -z CrashDmpFile]
            [-zp CrashPageFile] [-premote transport] [-robp]
            [-aDllName] [-c "command"] [-i ImagePath] [-y SymbolsPath]
            [-clines #] [-srcpath SourcePath] [-QR \\machine] [-wake ]
            [-remote transport:server=name,portid] [-server transport:portid]
            [-ses] [-sfce] [-sicv] [-snul] [-noio] [-failinc] [-noshell]

where: -? displays this help text
       command-line is the command to run under the debugger
       -- is the same as -G -g -o -p -1 -d -pd
       -aDllName sets the default extension DLL
       -c executes the following debugger command
       -clines number of lines of output history retrieved by a remote client
       -failinc causes incomplete symbol and module loads to fail
       -d sends all debugger output to kernel debugger via DbgPrint
          -d cannot be used with debugger remoting
          -d can only be used when the kernel debugger is enabled
       -g ignores initial breakpoint in debuggee
       -G ignores final breakpoint at process termination
       -hd specifies that the debug heap should not be used
           for created processes.  This only works on Windows Whistler.
       -o debugs all processes launched by debuggee
       -p pid specifies the decimal process Id to attach to
       -pd specifies that the debugger should automatically detach
       -pe specifies that any attach should be to an existing debug port
       -pn name specifies the name of the process to attach to
       -pt # specifies the interrupt timeout
       -pv specifies that any attach should be noninvasive
       -r specifies the (0-3) error level to break on (SeeSetErrorLevel)
       -robp allows breakpoints to be set in read-only memory
       -t specifies the (0-3) error level to display (SeeSetErrorLevel)
       -w specifies to debug 16 bit applications in a separate VDM
       -x sets second-chance break on AV exceptions
       -x{e|d|n|i} sets the break status for the specified event
       -2 creates a separate console window for debuggee
       -i ImagePath specifies the location of the executables that generated
          the fault (see _NT_EXECUTABLE_IMAGE_PATH)
       -lines requests that line number information be used if present
       -myob ignores version mismatches in DBGHELP.DLL
       -n enables verbose output from symbol handler
       -noio disables all I/O for dedicated remoting servers
       -noshell disables the .shell (!!) command
       -QR <\\machine> queries for remote servers
       -s disables lazy symbol loading
       -ses enables strict symbol loading
       -sfce fails critical errors encountered during file searching
       -sicv ignores the CV record when symbol loading
       -snul disables automatic symbol loading for unqualified names
       -srcpath specifies the source search path
       -v enables verbose output from debugger
       -wake wakes up a sleeping debugger and exits
       -y specifies the symbol search path (see _NT_SYMBOL_PATH)
       -z specifies the name of a crash dump file to debug
       -zp specifies the name of a page.dmp file
                           to use with a crash dump
       -remote lets you connect to a debugger session started with -server
               must be the first argument if present
               transport: tcp | npipe | ssl | spipe | 1394 | com
               name: machine name on which the debug server was created
               portid: id of the port the debugger server was created on
                   for tcp use:  port=
                   for npipe use:  pipe=
                   for 1394 use:  channel=
                   for com use:  port=,baud=,
                                 channel=
                   for ssl and spipe see the documentation
               example: ... -remote npipe:server=yourmachine,pipe=foobar
       -server creates a debugger session other people can connect to
               must be the first argument if present
               transport: tcp | npipe | ssl | spipe | 1394 | com
               portid: id of the port remote users can connect to
                   for tcp use:  port=
                   for npipe use:  pipe=
                   for 1394 use:  channel=
                   for com use:  port=,baud=,
                                 channel=
                   for ssl and spipe see the documentation
               example: ... -server npipe:pipe=foobar
       -premote transport specifies the process server to connect to
              transport arguments are given as with remoting

Environment Variables:

    _NT_SYMBOL_PATH=[Drive:][Path]
        Specify symbol image path.

    _NT_ALT_SYMBOL_PATH=[Drive:][Path]
        Specify an alternate symbol image path.

    _NT_DEBUGGER_EXTENSION_PATH=[Drive:][Path]
        Specify a path which should be searched first for extensions dlls

    _NT_EXECUTABLE_IMAGE_PATH=[Drive:][Path]
        Specify executable image path.

    _NT_SOURCE_PATH=[Drive:][Path]
        Specify source file path.

    _NT_DEBUG_LOG_FILE_OPEN=filename
        If specified, all output will be written to this file from offset 0.

    _NT_DEBUG_LOG_FILE_APPEND=filename
        If specified, all output will be APPENDed to this file.

    _NT_DEBUG_HISTORY_SIZE=size
        Specifies the size of a server's output history in kilobytes

Control Keys:

     Quit debugger
             Break into Target
     Force a break into debuggee (same as Ctrl-C)
     Debug Current debugger
     Toggle Verbose mode
     Print version information
ntsd: exiting - press enter ---

用法:开个cmd.exe窗口,输入:
ntsd -c q -p PID

把最后那个PID,改成你要终止的进程的ID。

如果你不知道进程的ID,任务管理器-》进程选项卡-》查看-》选择列-》
勾上"PID(进程标识符)",然后就能看见了。

2.xp下还有两个好东东
tasklist和tskill
tasklist能列出所有的进程,和相应的信息
tskill能查杀进程le
语法很简单
tskill 程序名!!