VSCode + JTAG调试合宙ESP32C3的经历
VSCode + JTAG调试合宙ESP32C3
环境
Windows10
VSCode + ESP-IDF
合宙ESP32C3（无串口芯片版本）
理论
想要直接使用内置JTAG，USB要求连接GPIO18和GPIO19
合宙ESP32C3有串口芯片版本USB经过CH343连接的串口，无法使用内置JTAG
合宙ESP32C3无串口芯片版本满足要求
步骤
连接PC后有一个虚拟串口和一个USB JTAG接口
按住BOOT，然后按下RST，松开BOOT，芯片进入下载模式，下载固件
PS F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world> idf.py flash -p COM16 -b 921600
Executing action: flash
Running ninja in directory f:\espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world\build
Executing "ninja flash"...
[1/5] cmd.exe /C "cd /D F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world\build\esp-idf\esptool_py && ...ion_table/partition-table.bin F:/Espressif/frameworks/esp-idf-v4.4.3/workspace/hello_world/build/hello_world.bin"hello_world.bin binary size 0x25130 bytes. Smallest app partition is 0x100000 bytes. 0xdaed0 bytes (86%) free.
[2/5] Performing build step for 'bootloader'
[1/1] cmd.exe /C "cd /D F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world\build\bootloader\esp-idf\esptool_py && F:\Espressif\python_env\idf4.4_py3.8_env\Scripts\python.exe F:/Espressif/frameworks/esp-idf-v4.4.3/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x0 F:/Espressif/frameworks/esp-idf-v4.4.3/workspace/hello_world/build/bootloader/bootloader.bin"
Bootloader binary size 0x4d70 bytes. 0x3290 bytes (40%) free.
[2/3] cmd.exe /C "cd /D F:\Espressif\frameworks\esp-idf-v4.4.3\components\esptool_py && F:\Espressif\tools\cmake\...rkspace/hello_world/build" -P F:/Espressif/frameworks/esp-idf-v4.4.3/components/esptool_py/run_serial_tool.cmake"esptool.py esp32c3 -p COM16 -b 921600 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
esptool.py v3.3.2
Serial port COM16
Connecting....
Chip is ESP32-C3 (revision 3)
Features: Wi-Fi
Crystal is 40MHz
MAC: 60:55:f9:75:9c:90
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00004fff...
Flash will be erased from 0x00010000 to 0x00035fff...
Flash will be erased from 0x00008000 to 0x00008fff...
Compressed 19824 bytes to 12050...
Writing at 0x00000000... (100 %)
Wrote 19824 bytes (12050 compressed) at 0x00000000 in 0.3 seconds (effective 585.5 kbit/s)...
Hash of data verified.
Compressed 151856 bytes to 82022...
Writing at 0x00010000... (16 %)
Writing at 0x00019991... (33 %)
Writing at 0x000202c8... (50 %)
Writing at 0x0002749a... (66 %)
Writing at 0x0002dacd... (83 %)
Writing at 0x00035037... (100 %)
Wrote 151856 bytes (82022 compressed) at 0x00010000 in 1.8 seconds (effective 687.7 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 103...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 684.5 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Done
PS F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world>
启动OpenOCD和GDB前先按下RST重启芯片，运行在正常模式，而不是下载模式
使用乐鑫OpenOCD，搭配board/esp32c3-builtin.cfg
启动OpenOCD，监听3333，成功
PS F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world> openocd -f board/esp32c3-builtin.cfg
Open On-Chip Debugger v0.11.0-esp32-20220706 (2022-07-06-15:48)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
Info : esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info : esp_usb_jtag: capabilities descriptor set to 0x2000
Warn : Transport "jtag" was already selected
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : esp_usb_jtag: serial (60:55:F9:75:9C:90)
Info : esp_usb_jtag: Device found. Base speed 40000KHz, div range 1 to 255
Info : clock speed 40000 kHz
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : datacount=2 progbufsize=16
Info : Examined RISC-V core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40101104
Info : starting gdb server for esp32c3 on 3333
Info : Listening on port 3333 for gdb connections
根据官方教程创建gdbinit文件，端口3333
target remote :3333
set remote hardware-watchpoint-limit 2
mon reset halt
flushregs
thb app_main
c
启动GDB调试，成功，此时已经可以使用GDB调试了
PS F:\Espressif\frameworks\esp-idf-v4.4.3\workspace\hello_world> riscv32-esp-elf-gdb -x gdbinit build/hello_world.elf
F:\Espressif\tools\riscv32-esp-elf\esp-2021r2-patch5-8.4.0\riscv32-esp-elf\bin\riscv32-esp-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
GNU gdb (crosstool-NG esp-2021r2-patch5) 9.2.90.20200913-git
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "--host=x86_64-host_w64-mingw32 --target=riscv32-esp-elf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from build/hello_world.elf...
0x40000000 in ?? ()
JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Reset cause (3) - (Software core reset)
Hardware assisted breakpoint 1 at 0x42005eee: file F:/Espressif/frameworks/esp-idf-v4.4.3/workspace/hello_world/main/hello_world_main.c, line 17.
[New Thread 1070136696]
[New Thread 1070130304]
[Switching to Thread 1070134812]
Thread 1 "main" hit Temporary breakpoint 1, app_main () at F:/Espressif/frameworks/esp-idf-v4.4.3/workspace/hello_world/main/hello_world_main.c:17
17 {
(gdb)
OpenOCD可以看到GDB连接后的行为
Info : accepting 'gdb' connection on tcp/3333
Memory protection is enabled. Reset target to disable it...
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : Reset cause (3) - (Software core reset)
Warn : No symbols for FreeRTOS!
Info : [esp32c3] Found 8 triggers
Info : Flash mapping 0: 0x10020 -> 0x3c020020, 27 KB
Info : Flash mapping 1: 0x20020 -> 0x42000020, 75 KB
Info : Auto-detected flash bank 'esp32c3.flash' size 4096 KB
Info : Using flash bank 'esp32c3.flash' size 4096 KB
Info : Flash mapping 0: 0x10020 -> 0x3c020020, 27 KB
Info : Flash mapping 1: 0x20020 -> 0x42000020, 75 KB
Info : Using flash bank 'esp32c3.irom' size 76 KB
Info : Flash mapping 0: 0x10020 -> 0x3c020020, 27 KB
Info : Flash mapping 1: 0x20020 -> 0x42000020, 75 KB
Info : Using flash bank 'esp32c3.drom' size 28 KB
Warn : negative reply, retrying
Warn : Prefer GDB command "target extended-remote :3333" instead of "target remote :3333"
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg: 0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
Info : Reset cause (3) - (Software core reset)
VSCode
使用指令行已成功，接下来使用VSCode
VSCode ESP-IDF插件官方说明如下，我使用ESP-IDF Debug Adapter失败，使用Microsoft C/C++ extension调试成功
vscode-esp-idf-extension/DEBUGGING.md at master · espressif/vscode-esp-idf-extension · GitHub
使用ESP-IDF插件，启动OpenOCD，打印如下，本质和指令行直接调用没啥区别
[OpenOCD]
[Stopped] : OpenOCD Server
[OpenOCD]
Open On-Chip Debugger v0.11.0-esp32-20220706 (2022-07-06-15:48)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
[OpenOCD]
debug_level: 2
[OpenOCD]
Info : only one transport option; autoselect 'jtag'
[OpenOCD]
Info : esp_usb_jtag: VID set to 0x303a and PID to 0x1001
Info : esp_usb_jtag: capabilities descriptor set to 0x2000
Warn : Transport "jtag" was already selected
[OpenOCD]
Info : Listening on port 6666 for tcl connections
[OpenOCD]
Info : Listening on port 4444 for telnet connections
[OpenOCD]
Info : esp_usb_jtag: serial (60:55:F9:75:9C:90)
[OpenOCD]
Info : esp_u[OpenOCD]
sb_jtag: Device found. Base speed 40000KHz, div range 1 to 255
[OpenOCD]
Info : cloc[OpenOCD]
k speed 40000 kHz
[OpenOCD]
Info : JTAG tap: esp32c3.cpu tap/device found: 0x00005c25 (mfg:[OpenOCD]
0x612 (Espressif Systems), part: 0x0005, ver: 0x0)
[OpenOCD]
Info : datacount=2 progbufsize=16
[OpenOCD]
Info : Examined RISC-V[OpenOCD]
core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40101104
[OpenOCD]
Info : [esp32c3] Found 8 trig[OpenOCD]
gers
[OpenOCD]
Info : starting gdb server for esp32c3 on 3333
Info : Listening on port 3333 for gdb connections
根据插件官方说明，创建launch.json，我修改了"miDebuggerPath"，根据自己的情况修改即可
{
"version": "0.2.0",
"configurations": [
{
"name": "GDB",
"type": "cppdbg",
"request": "launch",
"MIMode": "gdb",
"miDebuggerPath": "F:/Espressif/tools/riscv32-esp-elf/esp-2021r2-patch5-8.4.0/riscv32-esp-elf/bin/riscv32-esp-elf-gdb.exe",
"program": "${workspaceFolder}/build/${command:espIdf.getProjectName}.elf",
"windows": {
"program": "${workspaceFolder}\\build\\${command:espIdf.getProjectName}.elf"
},
"cwd": "${workspaceFolder}",
"environment": [{ "name": "PATH", "value": "${config:idf.customExtraPaths}" }],
"setupCommands": [
{ "text": "target remote :3333" },
{ "text": "set remote hardware-watchpoint-limit 2"},
{ "text": "mon reset halt" },
{ "text": "thb app_main" },
{ "text": "flushregs" }
],
"externalConsole": false,
"logging": {
"engineLogging": true
}
}
]
}
打个断点按下F5进行调试，按了三下才开启，原因未知
