19a开发板

测温

发射率设置

image-20210806174743066

image-20210809112741180

image-20210809112926016

设置为121a，不符合规则，设置为0

image-20210809113430747

读取

[E] [http.go:30] GetImageTarget

获取所有温度的接口（包括整帧，点、线、区域）

获取热成像界面上已经使能点线面区域整帧

P1 L1 R1 SR1

添加一个type字段

​ "Type": 0, //0-整帧；1-点；2-线；3-区域

json格式

[
  {
    "Enable": true,
    "Type": 0, //0-整帧；1-点；2-线；3-区域
    "ID": 0,
    "MaxTempPoint": {
      "X": 0,
      "Y": 0
    },
    "MinTempPoint": {
      "X": 0,
      "Y": 0
    },
    "TempAvg": 0,
    "TempCenter": 0,
    "TempMax": 0,
    "TempMin": 0,
    "TempRangeMax": 0,
    "TempRangeMin": 0,
    "Alarm": false //是否触发报警
  }
]

2021/09/30 09:16:48 GetTempPointTemp 获取测温点温度值
2021/09/30 09:16:48 [{true 1 279.5 279.5 279.5 279.5 {2968 7597} {2968 7597} 0 0} {true 2 278.7 278.7 278.7 278.7 {2718 1931} {2718 1931} 0 0} {true 3 277.7 277.7 277.7 277.7 {3767 4143} {3767 4143} 0 0} {true 4 278.4 278.4 278.4 278.4 {3031 2066} {3031 2066} 0 0} {false 5 0 0 0 0 {0 0} {0 0} 0 0} {false 6 0 0 0 0 {0 0} {0 0} 0 0} {false 7 0 0 0 0 {0 0} {0 0} 0 0} {false 8 0 0 0 0 {0 0} {0 0} 0 0}]
2021/09/30 09:16:48 GetTempLineTemp 获取测温线温度值
2021/09/30 09:16:48 [{false 1 0 0 0 0 {0 0} {0 0} 0 0} {false 2 0 0 0 0 {0 0} {0 0} 0 0} {false 3 0 0 0 0 {0 0} {0 0} 0 0} {false 4 0 0 0 0 {0 0} {0 0} 0 0} {false 5 0 0 0 0 {0 0} {0 0} 0 0} {false 6 0 0 0 0 {0 0} {0 0} 0 0} {false 7 0 0 0 0 {0 0} {0 0} 0 0} {false 8 0 0 0 0 {0 0} {0 0} 0 0}]
posted @ 2022-01-22 14:41  凌易说-lingyisay  阅读(28)  评论(0)  编辑  收藏  举报