CentOS-6.4安装手记
在虚拟机上安装CentOS时要注意，不要选自动安装模式，否则会出现错误
安装完了，自动重启，结果悲剧了，启动不了，提示下面的信息：
Installing VMware Tools, please wait...
mount: special device /dev/hda does not exist
mount: block device /dev/sr0 is write-protected, mounting read-only
./run_upgrade.sh: line 21: file: command not found
在选择安装镜像文件那里，选择"CentOS 64-bit detected.This operating system will use Easy Install. "，不要选择推荐的镜像安装
网卡配置
vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
NM_CONTROLLED=yes
ONBOOT=yes
HWADDR=00:0c:29:5b:1c:de
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.1.223
NETMASK=255.255.255.0
PREFIX=24
GATEWAY=192.168.1.1
DNS1=192.168.1.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
USERCTL=no
安装一些常用软件
yum install vim
yum install wget
yum install gcc
yum install make
yum install setuptool
yum install system-config-network-tui
yum install system-cofnig-firewall-tui
......
安装xwindow
安装X Window:yum groupinstall "X Window System"
安装gnome:yum groupinstall "Desktop"
安装中文语言:yum groupinstall "Chinese Support"
startx
按下Ctrl+Alt+F2,进入xwindow
