HOW TO: Troubleshoot Application Performance with SQL Server -zt from MS
Posted on 2008-07-18 11:19 挥辉 阅读(367) 评论(0) 编辑 收藏 举报HOW TO: Troubleshoot Application Performance with SQL Server
| Article ID | : | 224587 |
| Last Review | : | October 26, 2007 |
| Revision | : | 4.2 |
This article was previously published under Q224587
On This Page
SUMMARY
This step-by-step article describes how to troubleshoot SQL Server performance issues. Troubleshooting performance issues involves the use of a series of steps to isolate and determine the cause of an application slowdown. Possible causes include:
This article describes how to determine the source of a performance issue. It also references other articles in the Microsoft Knowledge Base that cover the details of specific performance issues for additional troubleshooting.
SQL Profiler is a powerful tool when troubleshooting your SQL Server 7.0, or later, application performance. SQL Profiler allows you to easily capture all the events that are occurring on the server under a typical load, and it provides information about them. Using SQL Profiler in conjunction with Microsoft Windows NT Performance Monitor and some simple queries to identify whether blocking is occurring will give you the information you must have to resolve the vast majority of performance problems.
For information about using SQL Profiler, see SQL Server 7.0 and SQL Server 2000 Books Online.
2. Use Performance Monitor to capture Windows NT and SQL Server counters. To do so, follow these steps:
For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
3. Check for blocking.
To see if blocking is occurring, run the sp_who system stored procedure:
Note Running the sp_who system stored procedure is a check to see if blocking exists. Typically, it is not enough information to fully troubleshoot a blocking problem. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
Look for a trend over the timeframe from when performance went from good to bad: what increased first? Is the computer CPU bound or DISK IO bound? This information, together with the Profiler output earlier in this article, will help you narrow down the problem areas. High CPU problems may indicate large numbers of stored procedure recompilations, ad-hoc query compilations, or intensive use of hash and merge joins. The articles referenced earlier in this article must be followed to determine the correct course of action. High disk queue lengths may indicate the need for more system memory or an improved disk subsystem.
| • | Blocking. |
| • | System resource contention. |
| • | Application design problems. |
| • | A particular set of queries or stored procedures with long execution times. |
Back to the topSQL Profiler
SQL Profiler is a powerful tool when troubleshooting your SQL Server 7.0, or later, application performance. SQL Profiler allows you to easily capture all the events that are occurring on the server under a typical load, and it provides information about them. Using SQL Profiler in conjunction with Microsoft Windows NT Performance Monitor and some simple queries to identify whether blocking is occurring will give you the information you must have to resolve the vast majority of performance problems.
What to Monitor
1. Set up SQL Profiler to capture a trace. To do so, follow these steps:| a. | Open SQL Profiler. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| b. | On the Tools menu, click Options. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| c. | Make sure that the All Event Classes and the All Data Columns options are selected. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| d. | Click OK. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| e. | Create a new trace. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| f. | On the File menu, point to New, and then click Trace. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| g. | On the General tab, specify a trace name and a file to capture the data to. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| h. | On the Events tab, add the following event types to your trace:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| i. | If your application is receiving timeout errors, stops responding (hangs), or experiences other events that cause the problem statements to never complete, also include the following events:
This will help to make certain that you can see the statement that was executing when the timeout occurred | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| j. | On the Data Columns tab, make sure that the following columns are included: For SQL Server 2000 Start Time End Time LoginSid SPID Event Class TextData IntegerData BinaryData Duration CPU Reads Writes Application Name NT User Name DBUserName For SQL Server 7.0 Start Time End Time Connection ID SPID Event Class Text Integer Data Binary Data Duration CPU Reads Writes Application Name NT User Name SQL User Name |
For information about using SQL Profiler, see SQL Server 7.0 and SQL Server 2000 Books Online.
2. Use Performance Monitor to capture Windows NT and SQL Server counters. To do so, follow these steps:
| a. | Start Windows NT Performance Monitor. |
| b. | On the View menu, click Log. |
| c. | On the Options menu, click Log. |
| d. | Specify a file name and location to log the performance counters. You can adjust the update interval as appropriate. |
| e. | On the Edit menu, click Add To Log. |
| f. | Add all objects. Both the Windows NT and the SQL Server objects. |
| g. | To start the log, on the Options menu, click Log, and then click the Start Log button. |
For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
150934 (http://support.microsoft.com/kb/150934/EN-US/) How to Create a Performance Monitor Log for NT Troubleshooting
3. Check for blocking.
To see if blocking is occurring, run the sp_who system stored procedure:
exec sp_who
Note Running the sp_who system stored procedure is a check to see if blocking exists. Typically, it is not enough information to fully troubleshoot a blocking problem. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
251004 (http://support.microsoft.com/kb/251004/EN-US/) INF: How to Monitor SQL Server 7.0 Blocking
Run the Application Under Typical Load
Ideally, it is best to capture the SQL Profiler, Performance Monitor, and blocking output during the same timeframe. This timeframe must encompass a time when application performance goes from good to bad. The combination of this information will help you to get a clearer picture of where the performance slowdown is occurring.Interpret the Results
| 1. | Check for blocking. If the blk column in the sp_who output is non-zero, this indicates that blocking is occurring on your system. If processes are blocking each other, the processes that are being blocked can experience longer execution times. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 224453 (http://support.microsoft.com/kb/224453/EN-US/) INF: Understanding and Resolving SQL Server 7.0 or 2000 Blocking Problems |
| 2. | Examine the SQL Profiler output. Viewing SQL Profiler data efficiently is extremely valuable in resolving performance issues. The most important thing to realize is that you do not have to look at everything you captured. Be selective. SQL Profiler provides capabilities to help you effectively view the captured data. On the Properties tabs (click Properties on the File menu), SQL Profiler allows you to limit the data displayed by removing data columns or events, grouping (sorting) by data columns, and applying filters. You can search the whole trace or only a specific column for specific values (on the Edit menu, click Find). You can also save the SQL Profiler data to a SQL Server table (on the File menu, point to Save As, click Trace Table), and then run SQL queries against it. Be careful that you perform filtering only on a previously saved trace file. If you perform these steps on an active trace, you risk losing data that has been captured since the trace was started. Save an active trace to a file or table first (on the File menu, click Save As) and then reopen it (on the File menu, click Open) before you continue. When you work on a saved trace file, the filtering does not permanently remove the data that is being filtered out; it just does not display it. You can add and remove events and data columns as needed to help focus your searches. The first step in examining SQL Profiler trace files for performance cases is to determine where the different types of events are occurring on the server. Group the trace by Event Class: a. On the File menu, click Properties. Grouping by the event class column shows what type of events are occurring on SQL Server, and how frequently. Search this column for the following events:b. On the Data Columns tab, use the UP button to move Event Class under the Groups heading, and the DOWN button to remove all other columns under the Groups heading. c. Click OK. SP:RECOMPILE This event indicates that a stored procedure was recompiled during execution. Several recompile events indicate that SQL Server is spending resources on query compilation instead of query execution. For additional informationabout troubleshooting stored procedure recompilations, click the following article number to view the article in the Microsoft Knowledge Base: 243586 (http://support.microsoft.com/kb/243586/EN-US/) INF: Troubleshooting Stored Procedure Recompilation Attention An attention signal indicates that a query was canceled by a client. This is generally because of one of two causes: The user explicitly canceled the query or ended the application. -or- A query timeout was exceeded. If you see attention signals, this may indicate that certain queries are running slowly. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 243589 (http://support.microsoft.com/kb/243589/EN-US/) HOW TO: Troubleshoot Slow-Running Queries on SQL Server 7.0 or Later To help identify the query that received the attention signal, revise the trace so that it is not grouped by any data column, and filter on the system process ID (SPID) that received it (on the Filters tab, set SPID = x). The SQL:StmtStarting, SQL:BatchStarting, or SP:StmtStarting event immediately preceding the attention signal is the query that received the timeout or cancel. You can search the Event Class column for the Attention event to easily locate it (on the Edit menu, click Find).PREPARE SQL and EXEC PREPARED SQL The Prepare SQL event indicates that an ODBC, OLE DB, or DB-Library application prepared a Transact-SQL statement ,or statements, for use. The Exec Prepared SQL event indicates that the application made use of an existing prepared statement to run a command. Missing Column StatisticsCompare the number of times these two events occur. Ideally, an application must prepare a SQL statement one time and run it several times. This saves the Optimizer the cost of compiling a new plan each time the statement is executed. Therefore, the number of Exec Prepared SQL events should be much larger than the number of Prepare SQL events. If the number of Prepare SQL events is roughly equivalent to the number of Exec Prepared SQLevents, this may indicate that the application is not making good use of the prepare/execute model. It is best not to prepare a statement that is only going to be executed a single time. For more information about preparing SQL statements, see the "Preparing SQL Statements" topic in SQL Server 7.0 Books Online. If the number of Exec Prepared SQL events is not three to five times greater than the number of Prepare SQL events, the application may not be making efficient use of the prepare/execute model. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 243588 (http://support.microsoft.com/kb/243588/EN-US/) HOW TO: Troubleshoot the Performance of Ad-Hoc Queries In SQL Server 2000, the excessive roundtrips per prepare/execute will be eliminated, so the 3-5 ratio is not as stringent. However, it can still be a good rule, to try and reuse the prepared plan more than one time. This event indicates that statistical information the Optimizer could have used to generate a better query plan was unavailable. This indicates that the query does not have useful indexes on at least one table involved. Beyond not having a useful index, SQL Server does not even have statistical data about the columns involved to make an informed decision for a query plan. The outcome is that the query plan generated may not be the optimal one. If you see these events, look at the query and the execution plan generated, and then see the following article in the Microsoft Knowledge Base for steps to take to improve the performance of this query: 243589 (http://support.microsoft.com/kb/243589/) HOW TO: Troubleshoot Slow-Running Queries on SQL Server 7.0 or Later When you view the Missing Column Statistics events, focus first on those that occur in association with long-running queries. Some events may be generated and resolved automatically by SQL Server with autostats and may not require user intervention. Therefore, the best strategy is to first focus on queries with long duration, as shown later in this article, and note if there are associated Missing Column Statistics events. If you are not seeing instances of these event classes, the next step is to determine where the time is being spent. Group the trace output by Duration: a. On the File menu, click Properties. By grouping on duration, you can easily see what SQL statements, batches, or procedures are running the slowest. It is very important to look not only at the time when the problem is occurring, but also to get a baseline of when performance is good to compare against. You can filter on start time to break the trace up into sections when performance was good, and a separate section for when performance was poor. Look for the queries with the longest duration when performance is good. These are most likely the root of the problem. If overall system performance is decreased, even good queries can show long durations as they are waiting on system resources. On the Data Columns tab, use the UP button to move Duration under the Groups heading, and the DOWN button to remove all other columns under the Groupsheading. c. On the Events tab, remove all groups except TSQL and Stored Procedures. d. Click OK. If you see a small number of queries with high durations, see the following article in the Microsoft Knowledge Base: 243589 (http://support.microsoft.com/kb/243589/) HOW TO: Troubleshoot Slow-Running Queries on SQL Server 7.0 or Later If you see that the duration of individual queries is low, but there are several of them, and the SQL Compilations/sec counter in Performance Monitor output (described later) is high, see the following article in the Microsoft Knowledge Base:
243588 (http://support.microsoft.com/kb/243588/) HOW TO: Troubleshoot the Performance of Ad-Hoc Queries Examine the remaining data columns:Additional insight into the nature of a performance problem can be gained by viewing the other data columns in the trace data. Here are some things to consider: If the CPU usage is high, group by CPU to see what queries are the biggest users of CPU time. Search the Text column for "hash" or "merge" to find what query execution plan is using these join types. They are more CPU and memory intensive than a nested loop join, which is generally IO intensive. The benefit derived from these fields may vary depending on the scenario, but they should be examined if the obvious fields earlier in this article do not provide an answer. If disk IO is the bottleneck, group by reads and writes. View the Application Name, NT User Name, and SQL User Name fields to help isolate the source of a long-running query. The integer data column of the exception event will indicate any errors that were returned back to the client. You can find the text of the error message by searching on the number in SQL Server 7.0 Books Online. The Connection ID field is helpful to make sure that you are looking at the same sessions for a specific client. A SPID cannot guarantee this, as a user may have disconnected and a new user connected and received the same SPID. |
| 3. | Examine the Performance Monitor output. Performance Monitor will show you the overall system bottlenecks. It may be that SQL Server and the application are performing as expected, but the computer is underpowered, lacking memory or other resources. Or certain counters can indicate problems with the way the application and SQL Server are performing. At a minimum, check the following counters: |
| • | Object: Process Counter: Processor Instance: SQL Server |
| • | Object: Processor Counter: %Processor Time Instance: Check each processor instance |
| • | Object: Physical Disk Counter: Avg. Disk Queue Length Instance: Check each physical disk instance |
| • | Object: SQL Server:SQL Statistics Counter: SQL Compilations/sec |
