摘要：
从docker 1.2开始，我们可以在容器内部访问主机设备通过 –device命 令选项， 在早期的版本当中可以通过-v选项实现。 首先来了解一下—device的使用方法： --device=<Host Device>:<Container Device Mapping>:<Permissions> 阅读全文
该文被密码保护。 阅读全文
摘要：
1 Scope of Document This document describes how to product yaffs2 rootfs img file 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement 3 阅读全文
摘要：
1 Scope of Document This document describes how to burn firmware to spi nand flash 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement 3 阅读全文
摘要：
1 Scope of Document This document describes kernel how to support bridge and nat 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 阅读全文
摘要：
1 Scope of Document This document describes kernel how to support tf card 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 3 Metho 阅读全文
摘要：
1 Scope of Document This document describes kernel how to support leds-gpio 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 3 Met 阅读全文
摘要：
1 Scope of Document This document describes kernel how to support spi nand boot 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 3 阅读全文
摘要：
1 Scope of Document This document describes how to nuc980 image 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 3 Method 3.1 Expo 阅读全文
摘要：
1 Scope of Document This document describes how to support spi nand boot 2 Requiremen 2.1 Function Requirement 2.2 Performance Requirement NA 3 Method 阅读全文
摘要：
1 Method 1.1 Export cross compiler export PATH=$PATH:/usr/local/arm_linux_4.8/bin/ 1.2 Compile uboot make disclean make nuc980_eth2uart_defconfig make 阅读全文