sdn第二次作业

1. 利用mininet创建如下拓扑，要求拓扑支持OpenFlow 1.3协议，主机名、交换机名以及端口对应正确，请给出拓扑Mininet执行结果，展示端口连接情况

2. 直接在Open vSwitch下发流表，用vlan得到下列虚拟网段，请逐条说明所下发的流表含义

sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=1,actions=push_vlan:0x8100,set_field:4097-\>vlan_vid,output:4//将交换机s1从端口1收到的报文打上vid = 1 的vlantag并从端口4发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=2,actions=push_vlan:0x8100,set_field:4098-\>vlan_vid,output:4//将交换机s1从端口2收到的报文打上vid = 2 的vlantag并从端口4发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=3,actions=push_vlan:0x8100,set_field:4099-\>vlan_vid,output:4//将交换机s1从端口3收到的报文打上vid = 3 的vlantag并从端口4发送出去

sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=4,dl_vlan=1,actions=strip_vlan,output:1//将s1从端口4收到的vlan_id=1的报文拆除vlan_tag并从端口1发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=4,dl_vlan=2,actions=strip_vlan,output:2//将s1从端口4收到的vlan_id=2的报文拆除vlan_tag并从端口2发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s1 in_port=4,dl_vlan=3,actions=strip_vlan,output:3//将s1从端口4收到的vlan_id=3的报文拆除vlan_tag并从端口3发送出去

sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=1,actions=push_vlan:0x8100,set_field:4097-\>vlan_vid,output:4//将交换机s2从端口1收到的报文打上vid = 1 的vlantag并从端口4发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=2,actions=push_vlan:0x8100,set_field:4098-\>vlan_vid,output:4//将交换机s2从端口2收到的报文打上vid = 2 的vlantag并从端口4发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=3,actions=push_vlan:0x8100,set_field:4099-\>vlan_vid,output:4//将交换机s2从端口3收到的报文打上vid = 3 的vlantag并从端口4发送出去

sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=4,dl_vlan=1,actions=strip_vlan,output:1//将s2从端口4收到的vlan_id=1的报文拆除vlan_tag并从端口1发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=4,dl_vlan=2,actions=strip_vlan,output:2//将s2从端口4收到的vlan_id=2的报文拆除vlan_tag并从端口2发送出去
sudo ovs-ofctl add-flow -O OpenFlow13 s2 in_port=4,dl_vlan=3,actions=strip_vlan,output:3//将s2从端口4收到的vlan_id=3的报文拆除vlan_tag并从端口3发送出去