OpenOCD 的 STM32F1 解锁与下载脚本

操作系统：Linux

解锁

#!/usr/bin/env bash

case "$1" in
   "-dap" | "dap-link")
       echo "You choose the DAP-Link"
       INTERFACE=cmsis-dap.cfg
   ;;
   "-st" | "st-link")
       echo "You choose the ST-Link V2"
       INTERFACE=stlink-v2.cfg
   ;;
   "-j" | "j-link")
       echo "You choose the J-Link"
       INTERFACE=jlink.cfg
   ;;
    "-h" | "help" | *)
        echo -e  "$0 [command] \n \
        dap-link    | -dap  Unlock by DAP-Link\n \
        st-link     | -st   Unlock by ST-Link V2\n \
        j-link      | -j    Unlock by J-Link\n \
        help        | -h    Show the help\n"
        exit
   ;;
esac

SOURCE=/usr/share/openocd/
INTERFACE_CFG=${SOURCE}scripts/interface/${INTERFACE}
TARGET_CFG=${SOURCE}scripts/target/stm32f1x.cfg
PWD=$(dirname "$(readlink -f "$0")")

echo "开始连接"
openocd -f ${INTERFACE_CFG}                     \
        -f ${TARGET_CFG}                        \
        -c "init"                               \
        -c "halt"                               \
        -c "stm32f1x unlock 0"                  \
        -c "reset halt"                         \
        -c "exit"

下载

#!/usr/bin/env bash

case "$1" in
   "-dap" | "dap-link")
       echo "You choose the DAP-Link"
       INTERFACE=cmsis-dap.cfg
   ;;
   "-st" | "st-link")
       echo "You choose the ST-Link V2"
       INTERFACE=stlink-v2.cfg
   ;;
   "-j" | "j-link")
       echo "You choose the J-Link"
       INTERFACE=jlink.cfg
   ;;
    "-h" | "help" | *)
        echo -e  "$0 [command] \n \
        dap-link    | -dap  Download by DAP-Link\n \
        st-link     | -st   Download by ST-Link V2\n \
        j-link      | -j    Download by J-Link\n \
        help        | -h    Show the help\n"
        exit
   ;;
esac


SOURCE=/usr/share/openocd/
INTERFACE_CFG=${SOURCE}scripts/interface/$INTERFACE
TARGET_CFG=${SOURCE}scripts/target/stm32f1x.cfg
PWD=$(dirname "$(readlink -f "$0")")
# BIN=${PWD}/build/LED.bin
HEX=${PWD}/build/LED.hex

echo "开始连接"
openocd -f ${INTERFACE_CFG}                     \
        -f ${TARGET_CFG}                        \
        -c "init"                               \
        -c "reset"                              \
        -c "halt"                               \
        -c "flash erase_sector 0 0 last"        \
        -c "flash write_image erase ${HEX}"     \
        -c "reset"                              \
        -c "shutdown"