摘要: 目前爱快只能安装在一块磁盘里,请确保安装机器里只有一块磁盘 1. 下载启动U盘制作工具老毛桃,大白菜,U启动,U深度等任意一个。 老毛桃启动U盘制作指引:https://www.laomaotao.net/help/2018/1110/6470.html 大白菜启动U盘制作指引:http://dab 阅读全文
posted @ 2020-06-09 17:47 larry-peng 阅读(4282) 评论(0) 推荐(0) 编辑
摘要: win10中查看连接过的wifi的密码,热点名字即为wifi名字在CMD窗口中使用以下命令查询Netsh wlan show profile name=”热点名字” key=clear 阅读全文
posted @ 2020-05-01 19:43 larry-peng 阅读(465) 评论(0) 推荐(0) 编辑
摘要: 华为服务器 阅读全文
posted @ 2020-04-28 19:40 larry-peng 阅读(1777) 评论(0) 推荐(0) 编辑
摘要: 原始问题:redhat可以利用kickstart.cfg文件的内容进行自动化安装,并且在kickstart.cfg文件中加入%post标签就可以在安装结束后执行一些脚本,这些脚本放在%post标签后面。 但一个问题是,当安装好OS后,如果我们想从原始的ISO镜像拷贝文件到安装好的系统,那么必需对其进 阅读全文
posted @ 2020-03-15 23:43 larry-peng 阅读(523) 评论(0) 推荐(0) 编辑
摘要: 我们来看下关于网卡特性的解释,不过记住GSO和GRO两个特性就好。 TSO(TCP Segmentation Offload),是利用网卡对TCP数据包分片,减轻CPU负荷的一种技术,也有人叫 LSO (Large segment offload) ,TSO是针对TCP的,UFO是针对UDP的。如果 阅读全文
posted @ 2020-03-15 12:09 larry-peng 阅读(2412) 评论(0) 推荐(0) 编辑
摘要: 转载于:https://www.cnblogs.com/danxi/p/6591885.html ethtool 常用命令如下,比如对eth0的操作: ethtool eth0 //查询ethx网口基本设置,其中 x 是对应网卡的编号,如eth0、eth1等等 ethtool –h //显示etht 阅读全文
posted @ 2020-03-15 09:57 larry-peng 阅读(1875) 评论(0) 推荐(0) 编辑
摘要: 原文链接:https://blog.csdn.net/yunmenglingxiao/article/details/62417266 阅读全文
posted @ 2019-12-03 21:18 larry-peng 阅读(1571) 评论(0) 推荐(0) 编辑
摘要: 关闭secureCRT 的 “叮叮”的声音options-> session Options -> Terminal -> audio bell (删除勾选) 阅读全文
posted @ 2019-12-01 17:29 larry-peng 阅读(3622) 评论(0) 推荐(1) 编辑
摘要: 第一步:确定是否安装vim-enhanced 第二步:将Emulation下的Terminal设置为Xterm,然后选中后面的两个复选框 第三步:将外观下的主题设置为Traditional,字体设置为如下第四步:断开连接,重新连接 阅读全文
posted @ 2019-12-01 17:24 larry-peng 阅读(1322) 评论(0) 推荐(0) 编辑
摘要: 第一步 关闭swap分区:swapoff -a第二步修改配置文件 - /etc/fstab删除swap相关行 /mnt/swap swap swap defaults 0 0 这一行或者注释掉这一行 第三步确认swap已经关闭free -m 若swap行都显示 0 则表示关闭成功 第四步调整 swa 阅读全文
posted @ 2019-11-28 15:48 larry-peng 阅读(15972) 评论(0) 推荐(0) 编辑
摘要: 制作CentOS7.6 自动安装ISO镜像光盘1. 系统安装包说明目录树结构|-- .discinfo|-- .treeinfo|-- Packages|-- base|-- images|-- isolinux|-- ks.cfg|-- repodata.discinfo 文件是安装价质的识别信息 阅读全文
posted @ 2019-11-20 22:20 larry-peng 阅读(3805) 评论(0) 推荐(0) 编辑
摘要: 1、在HBA卡环境下: 1-1、如果是后SAS盘 [root@localhost ~]# sdparm /dev/sdf /dev/sdf: SEAGATE ST4000NM0023 0004Read write error recovery mode page:AWRE 1 [cha: y, de 阅读全文
posted @ 2019-11-18 10:38 larry-peng 阅读(2363) 评论(0) 推荐(0) 编辑
摘要: 关闭服务器节能模式1. 浪潮服务器设置方法2. 华为服务器设置方法3. 戴尔服务器设置方法4. 宝德服务器设置方法一、 浪潮服务器 开机按 DEL键,进入BIOS系统 二、华为服务器 三、 戴尔服务器 四、宝德服务器 阅读全文
posted @ 2019-11-18 10:30 larry-peng 阅读(5825) 评论(0) 推荐(0) 编辑
摘要: Centos6/7多网卡配置端口聚合1. 关闭NetworkManager服务systemctl stop NetworkManagersystemctl disable NetworkManager 2. 加载bond模块modprobe bonding miimon=100 mode=0echo 阅读全文
posted @ 2019-11-16 21:28 larry-peng 阅读(11810) 评论(0) 推荐(0) 编辑
摘要: CentOS 7修改网卡命名为ethx格式1、编辑 grub 配置文件vim /etc/sysconfig/grub 找到GRUB_CMDLINE_LINUX 行,为其增加 2 个参数,net.ifnames=0 biosdevname=0 如下所示:GRUB_CMDLINE_LINUX="cras 阅读全文
posted @ 2019-11-16 20:42 larry-peng 阅读(717) 评论(0) 推荐(0) 编辑
摘要: 引用链接:https://www.cnblogs.com/ccit/p/10047904.html因某些修改操作,导致系统重启后无法正常启动,此时可进入救援模式,修复错误配置即可。OS:centos 71、重启系统后,进入grup引导页面,选中第一项然后按“e” 进入编辑模式: 2.、通过↓键找到如 阅读全文
posted @ 2019-11-14 10:53 larry-peng 阅读(2110) 评论(0) 推荐(0) 编辑
摘要: 参考链接:https://baijiahao.baidu.com/s?id=1614000108255096283&wfr=spider&for=pc1. 首先,打开centos7,在选择进入系统的界面按“e”进入编辑页面。 2. 然后按向下键,找到以“Linux16”开头的行,在该行的最后面输入“ 阅读全文
posted @ 2019-11-13 17:42 larry-peng 阅读(1146) 评论(0) 推荐(0) 编辑
摘要: 参考链接:https://www.cnblogs.com/muahao/p/7610413.htmlCentOS 7.6 从内核 3.10.0 升级到 5.3.6后,重启不了,原因是 Linux 内核 4.4.x 版本之后,dracut 命令生成的 initramfs 默认不会自动加载 mpt3sa 阅读全文
posted @ 2019-11-12 23:21 larry-peng 阅读(8255) 评论(1) 推荐(0) 编辑
摘要: 参考链接:https://www.cnblogs.com/easonscx/p/10724718.html 1. 配置centos6 yum源为阿里云cd /etc/yum.repos.d/mv CentOS-Base.repo CentOS-Base.repo.oldmv epel.repo ep 阅读全文
posted @ 2019-10-08 08:59 larry-peng 阅读(2920) 评论(0) 推荐(0) 编辑
摘要: #TC 限速#https://blog.csdn.net/zhongbeida_xue/article/details/54613750#https://blog.51cto.com/13162375/2112847#https://blog.csdn.net/eydwyz/article/deta 阅读全文
posted @ 2019-09-24 17:34 larry-peng 阅读(2016) 评论(0) 推荐(0) 编辑
摘要: 1. ifconfig命令配置IP、掩码(重启后失效) ifconfig eth4 192.168.4.2 netmask 255.255.255.0 配置路由 route add default gw 192.168.4.12. https://www.cnblogs.com/yhongji/p/ 阅读全文
posted @ 2019-09-24 13:28 larry-peng 阅读(443) 评论(0) 推荐(0) 编辑
摘要: https://blog.csdn.net/weixin_36820871/article/details/80595855 阅读全文
posted @ 2019-09-24 12:37 larry-peng 阅读(500) 评论(0) 推荐(0) 编辑
摘要: 参考链接: https://www.cnblogs.com/clsn/p/7833333.html 阅读全文
posted @ 2019-09-23 13:00 larry-peng 阅读(174) 评论(0) 推荐(0) 编辑
摘要: Centos 安装ixgbe网卡驱动参考链接: https://www.cnblogs.com/songhaibin/p/9608492.html1. 首先查看网卡类型 # lspci | grep Eth 07:00.0 Ethernet controller: Intel Corporation 阅读全文
posted @ 2019-09-23 10:25 larry-peng 阅读(3158) 评论(0) 推荐(0) 编辑
摘要: 传统的bond方式 1) bond几种模式介绍。 mode 0 :load balancing(round-robin)模式,需要交换机端支持,支持多端口负载均衡,支持端口冗余,slave接口的mac相同 mode 1:active-backup模式,最大支持两个端口,一主一备,同一时间只有一块网卡 阅读全文
posted @ 2019-09-22 15:06 larry-peng 阅读(311) 评论(0) 推荐(0) 编辑
摘要: 1.查看下当前的系统版本cat /etc/redhat-release 2.配置更新源vi /etc/yum.repos.d/upgrade.repo [upgrade]name=upgradebaseurl=https://buildlogs.centos.org/centos/6/upg/x86 阅读全文
posted @ 2019-09-18 09:18 larry-peng 阅读(12715) 评论(0) 推荐(0) 编辑
摘要: 1.修改yum源 [base]name=CentOS-$releasever - Basebaseurl=http://mirrors.aliyun.com/centos/7.6.1810/os/x86_64/gpgcheck=0[updates]name=CentOS-$releasever - 阅读全文
posted @ 2019-09-12 17:05 larry-peng 阅读(4002) 评论(0) 推荐(0) 编辑
摘要: 原文链接:https://blog.51cto.com/royals/1956165由于机房显示器分辨率过低,经常安装系统需要外借显示器或只能使用IPMI连接,略不方便。 可以在centos安装过程中设置分辨率自适应得到解决,具体过程如下: 1,系统读取安装信息后,选择到Install Centos 阅读全文
posted @ 2019-09-11 13:35 larry-peng 阅读(3311) 评论(0) 推荐(0) 编辑
摘要: 参考链接:https://people.centos.org/jperrin/Kickstart2.html参考链接:https://www.linuxidc.com/Linux/2017-08/146168.htm# kstart file automatically generated by a 阅读全文
posted @ 2019-09-08 14:52 larry-peng 阅读(246) 评论(0) 推荐(0) 编辑
摘要: 制作Centos6.5一键自动安装ISO镜像光盘 参考链接:https://pdf.us/2018/08/13/1710.html参考链接:https://www.jianshu.com/p/682308ba083e参考链接:Kickstart文件详解 https://www.cnblogs.com 阅读全文
posted @ 2019-09-08 14:50 larry-peng 阅读(1663) 评论(0) 推荐(0) 编辑