[wifi-bcm4330] miscellaneous things on bcm4330 wifi
1. HOST_WAKE irq trigger polarity, HIGH-LEVEL(default) or LOW-LEVEL
2. Reasons for "enable f2 failed"
why does the error "enable F2 failed" , the reason is either your bcmdhd.cal or the fw_*.bin is not correct, not matching the bcm4330 chip.
posted on 2014-10-25 09:54 Shawn X.Y. Bai 阅读(312) 评论(1) 编辑 收藏 举报
