uthash.h源码阅读
/*
Copyright (c) 2003-2013, Troy D. Hanson http://troydhanson.github.com/uthash/
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef UTHASH_H
#define UTHASH_H
#include <string.h> /* memcmp,strlen */
#include <stddef.h> /* ptrdiff_t */
#include <stdlib.h> /* exit() */
/* These macros use decltype or the earlier __typeof GNU extension.
As decltype is only available in newer compilers (VS2010 or gcc 4.3+
when compiling c++ source) this code uses whatever method is needed
or, for VS2008 where neither is available, uses casting workarounds. */
#ifdef _MSC_VER /* MS compiler */
#if _MSC_VER >= 1600 && defined(__cplusplus) /* VS2010 or newer in C++ mode */
#define DECLTYPE(x) (decltype(x))
#else /* VS2008 or older (or VS2010 in C mode) */
#define NO_DECLTYPE
#define DECLTYPE(x)
#endif
#else /* GNU, Sun and other compilers */
#define DECLTYPE(x) (__typeof(x))
#endif
#ifdef NO_DECLTYPE
#define DECLTYPE_ASSIGN(dst,src) \
do { \
char **_da_dst = (char**)(&(dst)); \
*_da_dst = (char*)(src); \
} while(0)
#else
#define DECLTYPE_ASSIGN(dst,src) \
do { \
(dst) = DECLTYPE(dst)(src); \
} while(0)
#endif
/* a number of the hash function use uint32_t which isn't defined on win32 */
#ifdef _MSC_VER
typedef unsigned int uint32_t;
typedef unsigned char uint8_t;
#else
#include <inttypes.h> /* uint32_t */
#endif
#define UTHASH_VERSION 1.9.8
#ifndef uthash_fatal
#define uthash_fatal(msg) exit(-1) /* fatal error (out of memory,etc) */
#endif
#ifndef uthash_malloc
#define uthash_malloc(sz) malloc(sz) /* malloc fcn */
#endif
#ifndef uthash_free
#define uthash_free(ptr,sz) free(ptr) /* free fcn */
#endif
#ifndef uthash_noexpand_fyi
#define uthash_noexpand_fyi(tbl) /* can be defined to log noexpand */
#endif
#ifndef uthash_expand_fyi
#define uthash_expand_fyi(tbl) /* can be defined to log expands */
#endif
/* initial number of buckets */
#define HASH_INITIAL_NUM_BUCKETS 32 /* initial number of buckets */
#define HASH_INITIAL_NUM_BUCKETS_LOG2 5 /* lg2 of initial number of buckets */
#define HASH_BKT_CAPACITY_THRESH 10 /* expand when bucket count reaches */
/* calculate the element whose hash handle address is hhe */
/* */
#define ELMT_FROM_HH(tbl,hhp) ((void*)(((char*)(hhp)) - ((tbl)->hho/*偏移,是一个定值*/)))
#define HASH_FIND(hh,head,keyptr,keylen,out) \
do { \
unsigned _hf_bkt,_hf_hashv; \
out=NULL; \
if (head) { \
HASH_FCN(keyptr,keylen, (head)->hh.tbl->num_buckets, _hf_hashv, _hf_bkt); \
if (HASH_BLOOM_TEST((head)->hh.tbl, _hf_hashv)) { \
HASH_FIND_IN_BKT((head)->hh.tbl, hh, (head)->hh.tbl->buckets[ _hf_bkt ], \
keyptr,keylen,out); \
} \
} \
} while (0)
#ifdef HASH_BLOOM
#define HASH_BLOOM_BITLEN (1ULL << HASH_BLOOM) /* 2^HASH_BLOOM */
#define HASH_BLOOM_BYTELEN (HASH_BLOOM_BITLEN/8) + ((HASH_BLOOM_BITLEN%8) ? 1:0) /*字节数*/
#define HASH_BLOOM_MAKE(tbl) /*tbl分配出来的哈希表指针*/ \
do { \
(tbl)->bloom_nbits = HASH_BLOOM;/* ?什么值在编译是指定的如: -DHASH_BLOOM=27 */ \
(tbl)->bloom_bv = (uint8_t*)uthash_malloc(HASH_BLOOM_BYTELEN); /*分配空间*/ \
if (!((tbl)->bloom_bv)) { uthash_fatal( "out of memory"); } \
memset((tbl)->bloom_bv, 0, HASH_BLOOM_BYTELEN);/*清空*/ \
(tbl)->bloom_sig = HASH_BLOOM_SIGNATURE; /*magic*/ \
} while (0)
#define HASH_BLOOM_FREE(tbl) \
do { \
uthash_free((tbl)->bloom_bv, HASH_BLOOM_BYTELEN); \
} while (0)
// (idx)/8 哪个字节 idx%8 哪个bit
#define HASH_BLOOM_BITSET(bv,idx) (bv[(idx)/8] |= (1U << ((idx)%8)))
// 判断那一位是否为'1'bit
#define HASH_BLOOM_BITTEST(bv,idx) (bv[(idx)/8] & (1U << ((idx)%8)))
#define HASH_BLOOM_ADD(tbl,hashv) \
HASH_BLOOM_BITSET((tbl)->bloom_bv, (hashv/*hash值*/ & (uint32_t)((1ULL << (tbl)->bloom_nbits) - 1))/*取低n位*/ )
#define HASH_BLOOM_TEST(tbl,hashv) \
HASH_BLOOM_BITTEST((tbl)->bloom_bv, (hashv & (uint32_t)((1ULL << (tbl)->bloom_nbits) - 1))) /*同理上*/
#else
#define HASH_BLOOM_MAKE(tbl)
#define HASH_BLOOM_FREE(tbl)
#define HASH_BLOOM_ADD(tbl,hashv)
#define HASH_BLOOM_TEST(tbl,hashv) (1)
#define HASH_BLOOM_BYTELEN 0
#endif
/*
head 是用户程序中定义的一个初始化为=NULL的user指针
hh 不知道是什么
1 分配一个UT_hash_table的空间
2 清空
3 这个哈希结构的tail字段指向要加入的结构体的hh字段的地址
4 32个桶
5 5个log2桶
6 hho hh在用户定义的结构体重的偏移
7 分配一个bucket的空间 哈希表的buckets字段指向他
8 初始化为0
9 处理BLOOM
16 -- 8k = 2^16/8 = 2^13
20 -- 128k = 2^17
32 -- 512M = 2^29
10 magic赋值
*/
#define LOG printf
#define HASH_MAKE_TABLE(hh,head/*user * 指针*/) \
do { LOG( "分配一个哈希表的空间,在堆中\n" ); \
(head)->hh.tbl = (UT_hash_table*)uthash_malloc( \
sizeof(UT_hash_table)); \
if (!((head)->hh.tbl)) { uthash_fatal( "out of memory"); /*没有内存了*/} \
memset((head)->hh.tbl, 0, sizeof(UT_hash_table)); /*清空*/ \
(head)->hh.tbl->tail = &((head)->hh); \
/*哈希表的尾指向第一个加入的结构体(包含hh的哈希handle)*/ \
(head)->hh.tbl->num_buckets = HASH_INITIAL_NUM_BUCKETS; \
/* 哈希桶个数为32 */ \
(head)->hh.tbl->log2_num_buckets = HASH_INITIAL_NUM_BUCKETS_LOG2; \
/*HASH_INITIAL_NUM_BUCKETS_LOG2=5 log2(32)=5?? */ \
(head)->hh.tbl->hho = (char*)(&(head)->hh) - (char*)(head); \
/* 这个handle与结构体的偏移量,即hh在结构体中的偏移 */ \
(head)->hh.tbl->buckets = (UT_hash_bucket*)uthash_malloc( \
HASH_INITIAL_NUM_BUCKETS*sizeof(struct UT_hash_bucket)); \
/*分配32个哈希桶*/ \
if (! (head)->hh.tbl->buckets) { uthash_fatal( "out of memory"); } /*没有内存*/\
memset((head)->hh.tbl->buckets, 0, /* 清空桶空间 */ \
HASH_INITIAL_NUM_BUCKETS*sizeof(struct UT_hash_bucket)); \
/*在此之后(head)->hh.tbl保存了哈希表结构的应用 */ \
HASH_BLOOM_MAKE((head)->hh.tbl); \
(head)->hh.tbl->signature = HASH_SIGNATURE; /*外部分析使用是一个magic*/ \
} while(0)
/* HASH_ADD_INT->HASH_ADD->HASH_ADD_KEYPTR */
#define HASH_ADD(hh,head/*user*/,fieldname/*id*/,keylen_in/*4*/,add)/*s*/ \
HASH_ADD_KEYPTR(hh/*?*/, head/*user*/,&((add)->fieldname)/*user结构体->id*/,keylen_in/*key的长度 4*/, add/*s结构体*/)
#define HASH_REPLACE(hh,head,fieldname,keylen_in,add,replaced) \
do { \
replaced=NULL; \
HASH_FIND(hh,head,&((add)->fieldname),keylen_in,replaced); \
if (replaced!=NULL) { \
HASH_DELETE(hh,head,replaced); \
}; \
HASH_ADD(hh,head,fieldname,keylen_in,add); \
} while(0)
/* 汇总的add的函数 */
#define HASH_ADD_KEYPTR(hh,head/*user指针*/,keyptr/*key的指针*/,keylen_in,add/*要加入的结构体指针*/) \
do { \
unsigned _ha_bkt; \
(add)->hh.next = NULL;/*user->hh->next : use->hh 是一个哈希handle */ \
(add)->hh.key = (char*)(keyptr); /*handle赋值*/ \
/*保存key,这样结构体中就有两个相同的可以了, 哈希key使用链,用户的key自己用,但不能改变*/\
(add)->hh.keylen = (unsigned)(keylen_in); /*key的长度*/ \
/*key 长度赋值 */ \
if (!(head)) {/*初始化,首个,这就是要求为什么哈希须初始NULL,保证执行到这里*/ \
head = (add);/* 指向第一个结构体(包含handle hh字段)*/ \
(head)->hh.prev = NULL; \
HASH_MAKE_TABLE(hh,head); \
} else { /* (head)->hh.tbl->tail 最后一个handle的下一个指向要加入的,用tail保证O(0)*/ \
(head)->hh.tbl->tail->next = (add); \
/*hh.prev指向的是用户的结构体,而(head)->hh.tbl->tail指向的是用户的结构体的handle字段 */ \
(add)->hh.prev = ELMT_FROM_HH((head)->hh.tbl/*分配的表*/, (head)->hh.tbl->tail/*最后一个handle*/);\
/*快速(head)->hh.tbl->tail -> (head)->hh.tbl.hho */ \
(head)->hh.tbl->tail = &((add)->hh); \
} \
(head)->hh.tbl->num_items++; \
(add)->hh.tbl = (head)->hh.tbl; \
/* 指向哈希表 */ \
HASH_FCN(keyptr/*user->id的指针*/,keylen_in/*长度*/, (head)->hh.tbl->num_buckets,/*同的个数*/ \
(add)->hh.hashv, _ha_bkt); \
LOG( "_ha_bkt=[%u]\n", _ha_bkt ); \
LOG( "(add)->hh.hashv = [%u]\n", (add)->hh.hashv ); \
/*真正计算hash了 */ \
HASH_ADD_TO_BKT((head)->hh.tbl->buckets[_ha_bkt]/*指向桶*/,&(add)->hh/*指向handle*/); \
HASH_BLOOM_ADD((head)->hh.tbl,(add)->hh.hashv); \
HASH_EMIT_KEY(hh,head,keyptr,keylen_in); \
HASH_FSCK(hh,head); \
} while(0)
#define HASH_TO_BKT( hashv, num_bkts, bkt ) \
do { \
bkt = ((hashv) & ((num_bkts) - 1)); \
} while(0)
/* delete "delptr" from the hash table.
* "the usual" patch-up process for the app-order doubly-linked-list.
* The use of _hd_hh_del below deserves special explanation.
* These used to be expressed using (delptr) but that led to a bug
* if someone used the same symbol for the head and deletee, like
* HASH_DELETE(hh,users,users);
* We want that to work, but by changing the head (users) below
* we were forfeiting our ability to further refer to the deletee (users)
* in the patch-up process. Solution: use scratch space to
* copy the deletee pointer, then the latter references are via that
* scratch pointer rather than through the repointed (users) symbol.
*/
#define HASH_DELETE(hh,head,delptr) \
do { \
unsigned _hd_bkt; \
struct UT_hash_handle *_hd_hh_del; \
if ( ((delptr)->hh.prev == NULL) && ((delptr)->hh.next == NULL) ) { \
uthash_free((head)->hh.tbl->buckets, \
(head)->hh.tbl->num_buckets*sizeof(struct UT_hash_bucket) ); \
HASH_BLOOM_FREE((head)->hh.tbl); \
uthash_free((head)->hh.tbl, sizeof(UT_hash_table)); \
head = NULL; \
} else { \
_hd_hh_del = &((delptr)->hh); \
if ((delptr) == ELMT_FROM_HH((head)->hh.tbl,(head)->hh.tbl->tail)) { \
(head)->hh.tbl->tail = \
(UT_hash_handle*)((ptrdiff_t)((delptr)->hh.prev) + \
(head)->hh.tbl->hho); \
} \
if ((delptr)->hh.prev) { \
((UT_hash_handle*)((ptrdiff_t)((delptr)->hh.prev) + \
(head)->hh.tbl->hho))->next = (delptr)->hh.next; \
} else { \
DECLTYPE_ASSIGN(head,(delptr)->hh.next); \
} \
if (_hd_hh_del->next) { \
((UT_hash_handle*)((ptrdiff_t)_hd_hh_del->next + \
(head)->hh.tbl->hho))->prev = \
_hd_hh_del->prev; \
} \
HASH_TO_BKT( _hd_hh_del->hashv, (head)->hh.tbl->num_buckets, _hd_bkt); \
HASH_DEL_IN_BKT(hh,(head)->hh.tbl->buckets[_hd_bkt], _hd_hh_del); \
(head)->hh.tbl->num_items--; \
} \
HASH_FSCK(hh,head); \
} while (0)
/* convenience forms of HASH_FIND/HASH_ADD/HASH_DEL */
#define HASH_FIND_STR(head,findstr,out) \
HASH_FIND(hh,head,findstr,strlen(findstr),out)
#define HASH_ADD_STR(head,strfield,add) \
HASH_ADD(hh,head,strfield,strlen(add->strfield),add)
#define HASH_REPLACE_STR(head,strfield,add,replaced) \
HASH_REPLACE(hh,head,strfield,strlen(add->strfield),add,replaced)
#define HASH_FIND_INT(head,findint,out) \
HASH_FIND(hh,head,findint,sizeof(int),out)
// 增加一个 INT 型的key
// add = struct user
// intfield = int
// head = user = (struct user *)NULL, 空指针
#define HASH_ADD_INT(head/* user*/,intfield/*id*/,add/*含有hh域的结构体 s*/ ) \
HASH_ADD(hh,head/*user */,intfield/*id*/,sizeof(int)/*4*/,add/* s* */)
#define HASH_REPLACE_INT(head,intfield,add,replaced) \
HASH_REPLACE(hh,head,intfield,sizeof(int),add,replaced)
#define HASH_FIND_PTR(head,findptr,out) \
HASH_FIND(hh,head,findptr,sizeof(void *),out)
#define HASH_ADD_PTR(head,ptrfield,add) \
HASH_ADD(hh,head,ptrfield,sizeof(void *),add)
#define HASH_REPLACE_PTR(head,ptrfield,add,replaced) \
HASH_REPLACE(hh,head,ptrfield,sizeof(void *),add,replaced)
#define HASH_DEL(head,delptr) \
HASH_DELETE(hh,head,delptr)
/* HASH_FSCK checks hash integrity on every add/delete when HASH_DEBUG is defined.
* This is for uthash developer only; it compiles away if HASH_DEBUG isn't defined.
*/
#ifdef HASH_DEBUG
#define HASH_OOPS(...) do { fprintf(stderr,__VA_ARGS__); exit(-1); } while (0)
#define HASH_FSCK(hh,head) \
do { \
unsigned _bkt_i; \
unsigned _count, _bkt_count; \
char *_prev; \
struct UT_hash_handle *_thh; \
if (head) { \
_count = 0; \
for( _bkt_i = 0; _bkt_i < (head)->hh.tbl->num_buckets; _bkt_i++) { \
_bkt_count = 0; \
_thh = (head)->hh.tbl->buckets[_bkt_i].hh_head; \
_prev = NULL; \
while (_thh) { \
if (_prev != (char*)(_thh->hh_prev)) { \
HASH_OOPS("invalid hh_prev %p, actual %p\n", \
_thh->hh_prev, _prev ); \
} \
_bkt_count++; \
_prev = (char*)(_thh); \
_thh = _thh->hh_next; \
} \
_count += _bkt_count; \
if ((head)->hh.tbl->buckets[_bkt_i].count != _bkt_count) { \
HASH_OOPS("invalid bucket count %d, actual %d\n", \
(head)->hh.tbl->buckets[_bkt_i].count, _bkt_count); \
} \
} \
if (_count != (head)->hh.tbl->num_items) { \
HASH_OOPS("invalid hh item count %d, actual %d\n", \
(head)->hh.tbl->num_items, _count ); \
} \
/* traverse hh in app order; check next/prev integrity, count */ \
_count = 0; \
_prev = NULL; \
_thh = &(head)->hh; \
while (_thh) { \
_count++; \
if (_prev !=(char*)(_thh->prev)) { \
HASH_OOPS("invalid prev %p, actual %p\n", \
_thh->prev, _prev ); \
} \
_prev = (char*)ELMT_FROM_HH((head)->hh.tbl, _thh); \
_thh = ( _thh->next ? (UT_hash_handle*)((char*)(_thh->next) + \
(head)->hh.tbl->hho) : NULL ); \
} \
if (_count != (head)->hh.tbl->num_items) { \
HASH_OOPS("invalid app item count %d, actual %d\n", \
(head)->hh.tbl->num_items, _count ); \
} \
} \
} while (0)
#else
#define HASH_FSCK(hh,head)
#endif
/* When compiled with -DHASH_EMIT_KEYS, length-prefixed keys are emitted to
* the descriptor to which this macro is defined for tuning the hash function.
* The app can #include <unistd.h> to get the prototype for write(2). */
#ifdef HASH_EMIT_KEYS
#define HASH_EMIT_KEY(hh,head,keyptr,fieldlen) \
do { \
unsigned _klen = fieldlen; \
write(HASH_EMIT_KEYS, &_klen, sizeof(_klen)); \
write(HASH_EMIT_KEYS, keyptr, fieldlen); \
} while (0)
#else
#define HASH_EMIT_KEY(hh,head,keyptr,fieldlen)
#endif
/* default to Jenkin's hash unless overridden e.g. DHASH_FUNCTION=HASH_SAX */
#ifdef HASH_FUNCTION
#define HASH_FCN HASH_FUNCTION
#else
#define HASH_FCN HASH_JEN
#endif
/* The Bernstein hash function, used in Perl prior to v5.6 */
#define HASH_BER(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned _hb_keylen=keylen; \
char *_hb_key=(char*)(key); \
(hashv) = 0; \
while (_hb_keylen--) { (hashv) = ((hashv) * 33) + *_hb_key++; } \
bkt = (hashv) & (num_bkts-1); \
} while (0)
/* SAX/FNV/OAT/JEN hash functions are macro variants of those listed at
* http://eternallyconfuzzled.com/tuts/algorithms/jsw_tut_hashing.aspx */
#define HASH_SAX(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned _sx_i; \
char *_hs_key=(char*)(key); \
hashv = 0; \
for(_sx_i=0; _sx_i < keylen; _sx_i++) \
hashv ^= (hashv << 5) + (hashv >> 2) + _hs_key[_sx_i]; \
bkt = hashv & (num_bkts-1); \
} while (0)
#define HASH_FNV(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned _fn_i; \
char *_hf_key=(char*)(key); \
hashv = 2166136261UL; \
for(_fn_i=0; _fn_i < keylen; _fn_i++) \
hashv = (hashv * 16777619) ^ _hf_key[_fn_i]; \
bkt = hashv & (num_bkts-1); \
} while(0)
#define HASH_OAT(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned _ho_i; \
char *_ho_key=(char*)(key); \
hashv = 0; \
for(_ho_i=0; _ho_i < keylen; _ho_i++) { \
hashv += _ho_key[_ho_i]; \
hashv += (hashv << 10); \
hashv ^= (hashv >> 6); \
} \
hashv += (hashv << 3); \
hashv ^= (hashv >> 11); \
hashv += (hashv << 15); \
bkt = hashv & (num_bkts-1); \
} while(0)
#define HASH_JEN_MIX(a,b,c) \
do { \
/*MIX 混合*/ \
a -= b; a -= c; a ^= ( c >> 13 ); \
b -= c; b -= a; b ^= ( a << 8 ); \
c -= a; c -= b; c ^= ( b >> 13 ); \
a -= b; a -= c; a ^= ( c >> 12 ); \
b -= c; b -= a; b ^= ( a << 16 ); \
c -= a; c -= b; c ^= ( b >> 5 ); \
a -= b; a -= c; a ^= ( c >> 3 ); \
b -= c; b -= a; b ^= ( a << 10 ); \
c -= a; c -= b; c ^= ( b >> 15 ); \
} while (0)
#define HASH_JEN(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned _hj_i,_hj_j,_hj_k; \
unsigned char *_hj_key=(unsigned char*)(key); \
hashv = 0xfeedbeef; /*初始值*/ \
_hj_i = _hj_j = 0x9e3779b9; /*初始值*/ \
_hj_k = (unsigned)(keylen); /*初始值*/ \
while (_hj_k >= 12) { /*>=12 才计算*/ \
_hj_i += (_hj_key[0] + ( (unsigned)_hj_key[1] << 8 ) \
+ ( (unsigned)_hj_key[2] << 16 ) \
+ ( (unsigned)_hj_key[3] << 24 ) ); \
_hj_j += (_hj_key[4] + ( (unsigned)_hj_key[5] << 8 ) \
+ ( (unsigned)_hj_key[6] << 16 ) \
+ ( (unsigned)_hj_key[7] << 24 ) ); \
hashv += (_hj_key[8] + ( (unsigned)_hj_key[9] << 8 ) \
+ ( (unsigned)_hj_key[10] << 16 ) \
+ ( (unsigned)_hj_key[11] << 24 ) ); \
\
HASH_JEN_MIX(_hj_i, _hj_j, hashv); \
\
_hj_key += 12; \
_hj_k -= 12; \
} \
hashv += keylen; /*加key长度*/ \
switch ( _hj_k ) { /*一个switch计算throuth*/ \
case 11: hashv += ( (unsigned)_hj_key[10] << 24 ); \
case 10: hashv += ( (unsigned)_hj_key[9] << 16 ); \
case 9: hashv += ( (unsigned)_hj_key[8] << 8 ); \
case 8: _hj_j += ( (unsigned)_hj_key[7] << 24 ); \
case 7: _hj_j += ( (unsigned)_hj_key[6] << 16 ); \
case 6: _hj_j += ( (unsigned)_hj_key[5] << 8 ); \
case 5: _hj_j += _hj_key[4]; \
case 4: _hj_i += ( (unsigned)_hj_key[3] << 24 ); \
case 3: _hj_i += ( (unsigned)_hj_key[2] << 16 ); \
case 2: _hj_i += ( (unsigned)_hj_key[1] << 8 ); \
case 1: _hj_i += _hj_key[0]; \
} \
/*计算出两个结果值*/ \
HASH_JEN_MIX(_hj_i, _hj_j, hashv/*输入输出参数*/); \
/*LOG("哈希\n" );*/ \
bkt = hashv & (num_bkts-1); \
/* 计算是那个桶 */ \
} while(0)
/* The Paul Hsieh hash function */
#undef get16bits
#if (defined(__GNUC__) && defined(__i386__)) || defined(__WATCOMC__) \
|| defined(_MSC_VER) || defined (__BORLANDC__) || defined (__TURBOC__)
#define get16bits(d) (*((const uint16_t *) (d)))
#endif
#if !defined (get16bits)
#define get16bits(d) ((((uint32_t)(((const uint8_t *)(d))[1])) << 8) \
+(uint32_t)(((const uint8_t *)(d))[0]) )
#endif
#define HASH_SFH(key,keylen,num_bkts,hashv,bkt) \
do { \
unsigned char *_sfh_key=(unsigned char*)(key); \
uint32_t _sfh_tmp, _sfh_len = keylen; \
\
int _sfh_rem = _sfh_len & 3; \
_sfh_len >>= 2; \
hashv = 0xcafebabe; \
\
/* Main loop */ \
for (;_sfh_len > 0; _sfh_len--) { \
hashv += get16bits (_sfh_key); \
_sfh_tmp = (uint32_t)(get16bits (_sfh_key+2)) << 11 ^ hashv; \
hashv = (hashv << 16) ^ _sfh_tmp; \
_sfh_key += 2*sizeof (uint16_t); \
hashv += hashv >> 11; \
} \
\
/* Handle end cases */ \
switch (_sfh_rem) { \
case 3: hashv += get16bits (_sfh_key); \
hashv ^= hashv << 16; \
hashv ^= (uint32_t)(_sfh_key[sizeof (uint16_t)] << 18); \
hashv += hashv >> 11; \
break; \
case 2: hashv += get16bits (_sfh_key); \
hashv ^= hashv << 11; \
hashv += hashv >> 17; \
break; \
case 1: hashv += *_sfh_key; \
hashv ^= hashv << 10; \
hashv += hashv >> 1; \
} \
\
/* Force "avalanching" of final 127 bits */ \
hashv ^= hashv << 3; \
hashv += hashv >> 5; \
hashv ^= hashv << 4; \
hashv += hashv >> 17; \
hashv ^= hashv << 25; \
hashv += hashv >> 6; \
bkt = hashv & (num_bkts-1); \
} while(0)
#ifdef HASH_USING_NO_STRICT_ALIASING
/* The MurmurHash exploits some CPU's (x86,x86_64) tolerance for unaligned reads.
* For other types of CPU's (e.g. Sparc) an unaligned read causes a bus error.
* MurmurHash uses the faster approach only on CPU's where we know it's safe.
*
* Note the preprocessor built-in defines can be emitted using:
*
* gcc -m64 -dM -E - < /dev/null (on gcc)
* cc -## a.c (where a.c is a simple test file) (Sun Studio)
*/
#if (defined(__i386__) || defined(__x86_64__) || defined(_M_IX86))
#define MUR_GETBLOCK(p,i) p[i]
#else /* non intel */
#define MUR_PLUS0_ALIGNED(p) (((unsigned long)p & 0x3) == 0)
#define MUR_PLUS1_ALIGNED(p) (((unsigned long)p & 0x3) == 1)
#define MUR_PLUS2_ALIGNED(p) (((unsigned long)p & 0x3) == 2)
#define MUR_PLUS3_ALIGNED(p) (((unsigned long)p & 0x3) == 3)
#define WP(p) ((uint32_t*)((unsigned long)(p) & ~3UL))
#if (defined(__BIG_ENDIAN__) || defined(SPARC) || defined(__ppc__) || defined(__ppc64__))
#define MUR_THREE_ONE(p) ((((*WP(p))&0x00ffffff) << 8) | (((*(WP(p)+1))&0xff000000) >> 24))
#define MUR_TWO_TWO(p) ((((*WP(p))&0x0000ffff) <<16) | (((*(WP(p)+1))&0xffff0000) >> 16))
#define MUR_ONE_THREE(p) ((((*WP(p))&0x000000ff) <<24) | (((*(WP(p)+1))&0xffffff00) >> 8))
#else /* assume little endian non-intel */
#define MUR_THREE_ONE(p) ((((*WP(p))&0xffffff00) >> 8) | (((*(WP(p)+1))&0x000000ff) << 24))
#define MUR_TWO_TWO(p) ((((*WP(p))&0xffff0000) >>16) | (((*(WP(p)+1))&0x0000ffff) << 16))
#define MUR_ONE_THREE(p) ((((*WP(p))&0xff000000) >>24) | (((*(WP(p)+1))&0x00ffffff) << 8))
#endif
#define MUR_GETBLOCK(p,i) (MUR_PLUS0_ALIGNED(p) ? ((p)[i]) : \
(MUR_PLUS1_ALIGNED(p) ? MUR_THREE_ONE(p) : \
(MUR_PLUS2_ALIGNED(p) ? MUR_TWO_TWO(p) : \
MUR_ONE_THREE(p))))
#endif
#define MUR_ROTL32(x,r) (((x) << (r)) | ((x) >> (32 - (r))))
#define MUR_FMIX(_h) \
do { \
_h ^= _h >> 16; \
_h *= 0x85ebca6b; \
_h ^= _h >> 13; \
_h *= 0xc2b2ae35l; \
_h ^= _h >> 16; \
} while(0)
#define HASH_MUR(key,keylen,num_bkts,hashv,bkt) \
do { \
const uint8_t *_mur_data = (const uint8_t*)(key); \
const int _mur_nblocks = (keylen) / 4; \
uint32_t _mur_h1 = 0xf88D5353; \
uint32_t _mur_c1 = 0xcc9e2d51; \
uint32_t _mur_c2 = 0x1b873593; \
uint32_t _mur_k1 = 0; \
const uint8_t *_mur_tail; \
const uint32_t *_mur_blocks = (const uint32_t*)(_mur_data+_mur_nblocks*4); \
int _mur_i; \
for(_mur_i = -_mur_nblocks; _mur_i; _mur_i++) { \
_mur_k1 = MUR_GETBLOCK(_mur_blocks,_mur_i); \
_mur_k1 *= _mur_c1; \
_mur_k1 = MUR_ROTL32(_mur_k1,15); \
_mur_k1 *= _mur_c2; \
\
_mur_h1 ^= _mur_k1; \
_mur_h1 = MUR_ROTL32(_mur_h1,13); \
_mur_h1 = _mur_h1*5+0xe6546b64; \
} \
_mur_tail = (const uint8_t*)(_mur_data + _mur_nblocks*4); \
_mur_k1=0; \
switch((keylen) & 3) { \
case 3: _mur_k1 ^= _mur_tail[2] << 16; \
case 2: _mur_k1 ^= _mur_tail[1] << 8; \
case 1: _mur_k1 ^= _mur_tail[0]; \
_mur_k1 *= _mur_c1; \
_mur_k1 = MUR_ROTL32(_mur_k1,15); \
_mur_k1 *= _mur_c2; \
_mur_h1 ^= _mur_k1; \
} \
_mur_h1 ^= (keylen); \
MUR_FMIX(_mur_h1); \
hashv = _mur_h1; \
bkt = hashv & (num_bkts-1); \
} while(0)
#endif /* HASH_USING_NO_STRICT_ALIASING */
/* key comparison function; return 0 if keys equal */
#define HASH_KEYCMP(a,b,len) memcmp(a,b,len)
/* iterate over items in a known bucket to find desired item */
#define HASH_FIND_IN_BKT(tbl,hh,head,keyptr,keylen_in,out) \
do { \
if (head.hh_head) DECLTYPE_ASSIGN(out,ELMT_FROM_HH(tbl,head.hh_head)); \
else out=NULL; \
while (out) { \
if ((out)->hh.keylen == keylen_in) { \
if ((HASH_KEYCMP((out)->hh.key,keyptr,keylen_in)) == 0) break; \
} \
if ((out)->hh.hh_next) DECLTYPE_ASSIGN(out,ELMT_FROM_HH(tbl,(out)->hh.hh_next)); \
else out = NULL; \
} \
} while(0)
/* add an item to a bucket */
#define HASH_ADD_TO_BKT(head/*桶*/,addhh)/*要加入的handle*/ \
do { \
head.count++; \
(addhh)->hh_next = head.hh_head;/*桶中元素关联,头插入*/ \
(addhh)->hh_prev = NULL; \
if (head.hh_head) {/*已经有元素了*/ (head).hh_head->hh_prev = (addhh); } \
(head).hh_head=addhh; /*头指向刚插入的元素*/ \
if (head.count >= ((head.expand_mult+1) * HASH_BKT_CAPACITY_THRESH/*桶的容量*/) \
&& (addhh)->tbl->noexpand != 1) /*这个桶可以扩展*/{ \
HASH_EXPAND_BUCKETS((addhh)->tbl); \
LOG("扩展桶.\n" ); \
} \
} while(0)
/* remove an item from a given bucket */
#define HASH_DEL_IN_BKT(hh,head,hh_del) \
(head).count--; \
if ((head).hh_head == hh_del) { \
(head).hh_head = hh_del->hh_next; \
} \
if (hh_del->hh_prev) { \
hh_del->hh_prev->hh_next = hh_del->hh_next; \
} \
if (hh_del->hh_next) { \
hh_del->hh_next->hh_prev = hh_del->hh_prev; \
}
/* Bucket expansion has the effect of doubling the number of buckets
* and redistributing the items into the new buckets. Ideally the
* items will distribute more or less evenly into the new buckets
* (the extent to which this is true is a measure of the quality of
* the hash function as it applies to the key domain).
*
* With the items distributed into more buckets, the chain length
* (item count) in each bucket is reduced. Thus by expanding buckets
* the hash keeps a bound on the chain length. This bounded chain
* length is the essence of how a hash provides constant time lookup.
*
* The calculation of tbl->ideal_chain_maxlen below deserves some
* explanation. First, keep in mind that we're calculating the ideal
* maximum chain length based on the *new* (doubled) bucket count.
* In fractions this is just n/b (n=number of items,b=new num buckets).
* Since the ideal chain length is an integer, we want to calculate
* ceil(n/b). We don't depend on floating point arithmetic in this
* hash, so to calculate ceil(n/b) with integers we could write
*
* ceil(n/b) = (n/b) + ((n%b)?1:0)
*
* and in fact a previous version of this hash did just that.
* But now we have improved things a bit by recognizing that b is
* always a power of two. We keep its base 2 log handy (call it lb),
* so now we can write this with a bit shift and logical AND:
*
* ceil(n/b) = (n>>lb) + ( (n & (b-1)) ? 1:0)
*
*/
#define HASH_EXPAND_BUCKETS(tbl) \
do { \
unsigned _he_bkt; \
unsigned _he_bkt_i; \
struct UT_hash_handle *_he_thh, *_he_hh_nxt; \
LOG("扩展hash表的桶\n" ); \
UT_hash_bucket *_he_new_buckets, *_he_newbkt; \
_he_new_buckets = (UT_hash_bucket*)uthash_malloc( \
2 * tbl->num_buckets * sizeof(struct UT_hash_bucket)); \
LOG("2倍的扩展桶的个数\n"); \
if (!_he_new_buckets) { uthash_fatal( "out of memory"); } \
memset(_he_new_buckets, 0, \
2 * tbl->num_buckets * sizeof(struct UT_hash_bucket)); \
tbl->ideal_chain_maxlen = \
(tbl->num_items >> (tbl->log2_num_buckets+1)) + \
((tbl->num_items & ((tbl->num_buckets*2)-1)) ? 1 : 0); \
LOG("ideal_chain_maxlen=[%d] = 总数[%d]/桶的个数[%d]\n", tbl->ideal_chain_maxlen,tbl->num_items,tbl->num_buckets ); \
/*(tbl->num_items & ((tbl->num_buckets*2)-1)) 是否2的幂*/ \
tbl->nonideal_items = 0; \
for( _he_bkt_i = 0; _he_bkt_i < tbl->num_buckets; _he_bkt_i++ ) { \
LOG( "!!tbl->buckets[ %.3d ].count = [%.3d] \n", _he_bkt_i, tbl->buckets[ _he_bkt_i ].count ); }\
for(_he_bkt_i = 0; _he_bkt_i < tbl->num_buckets; _he_bkt_i++) \
{ LOG("第[%u]个桶\n", _he_bkt_i ); \
_he_thh = tbl->buckets[ _he_bkt_i ].hh_head;/*如果这个桶不为空*/ \
while (_he_thh) { \
_he_hh_nxt = _he_thh->hh_next; \
HASH_TO_BKT( _he_thh->hashv/*哈希值*/, tbl->num_buckets*2/*新桶的个数*/, _he_bkt/*输出参数*/);\
_he_newbkt = &(_he_new_buckets[ _he_bkt ]); /*指向新的桶*/ \
if (++(_he_newbkt->count) > tbl->ideal_chain_maxlen) { \
tbl->nonideal_items++;/*增加一个坏桶*/ \
_he_newbkt->expand_mult = _he_newbkt->count / \
tbl->ideal_chain_maxlen; \
LOG( "桶的扩展参数[%d] = [%d/%d]\n", _he_newbkt->expand_mult, _he_newbkt->count, tbl->ideal_chain_maxlen ); \
} \
/*插入逻辑*/ \
_he_thh->hh_prev = NULL; \
_he_thh->hh_next = _he_newbkt->hh_head; \
if (_he_newbkt->hh_head) _he_newbkt->hh_head->hh_prev = \
_he_thh; \
_he_newbkt->hh_head = _he_thh; \
_he_thh = _he_hh_nxt; \
} \
} \
LOG("释放旧的桶.\n" ); \
uthash_free( tbl->buckets, tbl->num_buckets*sizeof(struct UT_hash_bucket) ); \
tbl->num_buckets *= 2; \
tbl->log2_num_buckets++; \
tbl->buckets = _he_new_buckets; /*新桶指针*/ \
LOG( "不理想的元素个数[%d] \n", tbl->nonideal_items ); \
tbl->ineff_expands = (tbl->nonideal_items > (tbl->num_items >> 1)) ? \
(tbl->ineff_expands+1) : 0; \
LOG( "低效的扩增数[%d] \n", tbl->ineff_expands ); \
if (tbl->ineff_expands > 1) { \
tbl->noexpand=1; \
uthash_noexpand_fyi(tbl); /*再扩*/ \
} \
uthash_expand_fyi(tbl);/*没有实现*/ \
} while(0)
/* This is an adaptation of Simon Tatham's O(n log(n)) mergesort */
/* Note that HASH_SORT assumes the hash handle name to be hh.
* HASH_SRT was added to allow the hash handle name to be passed in. */
#define HASH_SORT(head,cmpfcn) HASH_SRT(hh,head,cmpfcn)
#define HASH_SRT(hh,head,cmpfcn) \
do { \
unsigned _hs_i; \
unsigned _hs_looping,_hs_nmerges,_hs_insize,_hs_psize,_hs_qsize; \
struct UT_hash_handle *_hs_p, *_hs_q, *_hs_e, *_hs_list, *_hs_tail; \
if (head) { \
_hs_insize = 1; \
_hs_looping = 1; \
_hs_list = &((head)->hh); \
while (_hs_looping) { \
_hs_p = _hs_list; \
_hs_list = NULL; \
_hs_tail = NULL; \
_hs_nmerges = 0; \
while (_hs_p) { \
_hs_nmerges++; \
_hs_q = _hs_p; \
_hs_psize = 0; \
for ( _hs_i = 0; _hs_i < _hs_insize; _hs_i++ ) { \
_hs_psize++; \
_hs_q = (UT_hash_handle*)((_hs_q->next) ? \
((void*)((char*)(_hs_q->next) + \
(head)->hh.tbl->hho)) : NULL); \
if (! (_hs_q) ) break; \
} \
_hs_qsize = _hs_insize; \
while ((_hs_psize > 0) || ((_hs_qsize > 0) && _hs_q )) { \
if (_hs_psize == 0) { \
_hs_e = _hs_q; \
_hs_q = (UT_hash_handle*)((_hs_q->next) ? \
((void*)((char*)(_hs_q->next) + \
(head)->hh.tbl->hho)) : NULL); \
_hs_qsize--; \
} else if ( (_hs_qsize == 0) || !(_hs_q) ) { \
_hs_e = _hs_p; \
if (_hs_p){ \
_hs_p = (UT_hash_handle*)((_hs_p->next) ? \
((void*)((char*)(_hs_p->next) + \
(head)->hh.tbl->hho)) : NULL); \
} \
_hs_psize--; \
} else if (( \
cmpfcn(DECLTYPE(head)(ELMT_FROM_HH((head)->hh.tbl,_hs_p)), \
DECLTYPE(head)(ELMT_FROM_HH((head)->hh.tbl,_hs_q))) \
) <= 0) { \
_hs_e = _hs_p; \
if (_hs_p){ \
_hs_p = (UT_hash_handle*)((_hs_p->next) ? \
((void*)((char*)(_hs_p->next) + \
(head)->hh.tbl->hho)) : NULL); \
} \
_hs_psize--; \
} else { \
_hs_e = _hs_q; \
_hs_q = (UT_hash_handle*)((_hs_q->next) ? \
((void*)((char*)(_hs_q->next) + \
(head)->hh.tbl->hho)) : NULL); \
_hs_qsize--; \
} \
if ( _hs_tail ) { \
_hs_tail->next = ((_hs_e) ? \
ELMT_FROM_HH((head)->hh.tbl,_hs_e) : NULL); \
} else { \
_hs_list = _hs_e; \
} \
if (_hs_e) { \
_hs_e->prev = ((_hs_tail) ? \
ELMT_FROM_HH((head)->hh.tbl,_hs_tail) : NULL); \
} \
_hs_tail = _hs_e; \
} \
_hs_p = _hs_q; \
} \
if (_hs_tail){ \
_hs_tail->next = NULL; \
} \
if ( _hs_nmerges <= 1 ) { \
_hs_looping=0; \
(head)->hh.tbl->tail = _hs_tail; \
DECLTYPE_ASSIGN(head,ELMT_FROM_HH((head)->hh.tbl, _hs_list)); \
} \
_hs_insize *= 2; \
} \
HASH_FSCK(hh,head); \
} \
} while (0)
/* This function selects items from one hash into another hash.
* The end result is that the selected items have dual presence
* in both hashes. There is no copy of the items made; rather
* they are added into the new hash through a secondary hash
* hash handle that must be present in the structure. */
#define HASH_SELECT(hh_dst, dst, hh_src, src, cond) \
do { \
unsigned _src_bkt, _dst_bkt; \
void *_last_elt=NULL, *_elt; \
UT_hash_handle *_src_hh, *_dst_hh, *_last_elt_hh=NULL; \
ptrdiff_t _dst_hho = ((char*)(&(dst)->hh_dst) - (char*)(dst)); \
if (src) { \
for(_src_bkt=0; _src_bkt < (src)->hh_src.tbl->num_buckets; _src_bkt++) { \
for(_src_hh = (src)->hh_src.tbl->buckets[_src_bkt].hh_head; \
_src_hh; \
_src_hh = _src_hh->hh_next) { \
_elt = ELMT_FROM_HH((src)->hh_src.tbl, _src_hh); \
if (cond(_elt)) { \
_dst_hh = (UT_hash_handle*)(((char*)_elt) + _dst_hho); \
_dst_hh->key = _src_hh->key; \
_dst_hh->keylen = _src_hh->keylen; \
_dst_hh->hashv = _src_hh->hashv; \
_dst_hh->prev = _last_elt; \
_dst_hh->next = NULL; \
if (_last_elt_hh) { _last_elt_hh->next = _elt; } \
if (!dst) { \
DECLTYPE_ASSIGN(dst,_elt); \
HASH_MAKE_TABLE(hh_dst,dst); \
} else { \
_dst_hh->tbl = (dst)->hh_dst.tbl; \
} \
HASH_TO_BKT(_dst_hh->hashv, _dst_hh->tbl->num_buckets, _dst_bkt); \
HASH_ADD_TO_BKT(_dst_hh->tbl->buckets[_dst_bkt],_dst_hh); \
(dst)->hh_dst.tbl->num_items++; \
_last_elt = _elt; \
_last_elt_hh = _dst_hh; \
} \
} \
} \
} \
HASH_FSCK(hh_dst,dst); \
} while (0)
#define HASH_CLEAR(hh,head) \
do { \
if (head) { \
uthash_free((head)->hh.tbl->buckets, \
(head)->hh.tbl->num_buckets*sizeof(struct UT_hash_bucket)); \
HASH_BLOOM_FREE((head)->hh.tbl); \
uthash_free((head)->hh.tbl, sizeof(UT_hash_table)); \
(head)=NULL; \
} \
} while(0)
#define HASH_OVERHEAD(hh,head) \
(size_t)((((head)->hh.tbl->num_items * sizeof(UT_hash_handle)) + \
((head)->hh.tbl->num_buckets * sizeof(UT_hash_bucket)) + \
(sizeof(UT_hash_table)) + \
(HASH_BLOOM_BYTELEN)))
#ifdef NO_DECLTYPE
#define HASH_ITER(hh,head,el,tmp) \
for((el)=(head), (*(char**)(&(tmp)))=(char*)((head)?(head)->hh.next:NULL); \
el; (el)=(tmp),(*(char**)(&(tmp)))=(char*)((tmp)?(tmp)->hh.next:NULL))
#else
#define HASH_ITER(hh,head,el,tmp) \
for((el)=(head),(tmp)=DECLTYPE(el)((head)?(head)->hh.next:NULL); \
el; (el)=(tmp),(tmp)=DECLTYPE(el)((tmp)?(tmp)->hh.next:NULL))
#endif
/* obtain a count of items in the hash */
#define HASH_COUNT(head) HASH_CNT(hh,head)
#define HASH_CNT(hh,head) ((head)?((head)->hh.tbl->num_items):0)
typedef struct UT_hash_bucket { /* 哈希桶 */
struct UT_hash_handle *hh_head;
unsigned count;
/* expand_mult is normally set to 0. In this situation, the max chain length
* threshold is enforced at its default value, HASH_BKT_CAPACITY_THRESH 定值. (If
* the bucket's chain exceeds this length, bucket expansion is triggered).
* However, setting expand_mult to a non-zero value delays bucket expansion
* (that would be triggered by additions to this particular bucket)
* until its chain length reaches a *multiple* of HASH_BKT_CAPACITY_THRESH.
* (The multiplier is simply expand_mult+1). The whole idea of this
* multiplier is to reduce bucket expansions, since they are expensive安贵的, in
* situations where we know that a particular bucket tends to be overused.
* It is better to let its chain length grow to a longer yet-still-bounded
* value, than to do an O(n) bucket expansion too often.
*/
unsigned expand_mult;
} UT_hash_bucket;
/* random signature used only to find hash tables in external analysis */
#define HASH_SIGNATURE 0xa0111fe1
#define HASH_BLOOM_SIGNATURE 0xb12220f2
typedef struct UT_hash_table {
UT_hash_bucket *buckets; /* 哈希桶数组*/
unsigned num_buckets,
log2_num_buckets;
unsigned num_items; /* 多少个Iterms */
struct UT_hash_handle *tail; /* tail hh in app order, for fast append 尾,为了增加 */
ptrdiff_t hho; /* hash handle offset (byte pos of hash handle in element 哈希handle的偏移 */
/* in an ideal situation (all buckets used equally 在理想的情况下所有的桶是相等的),
no bucket would have 没有一个桶的iterm个数大于 总的iterms(总数)/(桶个数) 取上值
* more than ceil(#items/#buckets) items. that's the ideal chain length. */
unsigned ideal_chain_maxlen;
/* nonideal_items is the number of items in the hash whose chain position 所在桶的中(超过最大理想(容忍)值)
* exceeds the ideal chain maxlen. these items pay the penalty for an uneven
* hash distribution; reaching them in a chain traversal takes >ideal steps */
unsigned nonideal_items;
/* ineffective expands occur when a bucket doubling was performed(这次扩涨无效), but
* afterward, more than half the items in the hash had nonideal chain有一半以上是 不理想的
* positions. If this happens on two consecutive expansions we inhibit any 如果发生在量次连续的扩展中,
我们禁止再次扩增,没有用的? 说明哈希函数有问题
* further expansion, as it's not helping; this happens when the hash
* function isn't a good fit for the key domain(key域). When expansion is inhibited
* the hash will still work还可以用,但是是低效的, albeit no longer in constant time. */
unsigned ineff_expands,
noexpand;
uint32_t signature; /* used only to find hash tables in external analysis */
#ifdef HASH_BLOOM
uint32_t bloom_sig; /* used only to test bloom exists in external analysis */
uint8_t *bloom_bv; /*指向一个bit位数组*/
char bloom_nbits;
#endif
} UT_hash_table;
/* 这个结构体 !!!!! */
typedef struct UT_hash_handle {
struct UT_hash_table *tbl; /* 指向hash表 */
void *prev; /* prev element in app order */
void *next; /* next element in app order */
struct UT_hash_handle *hh_prev; /* previous hh in bucket order */
struct UT_hash_handle *hh_next; /* next hh in bucket order */
void *key; /* ptr to enclosing struct's key */
unsigned keylen; /* enclosing struct's key len */
unsigned hashv;/*哈希值*/ /* result of hash-fcn(key) */
} UT_hash_handle;
#endif /* UTHASH_H */