2019 SDN上机第6次作业

1.实验拓扑

python

from mininet.topo import Topo
class MyTopo(Topo):
    def __init__(self):
        Topo.__init__(self)
        h1 = self.addHost('h1')
        h2 = self.addHost('h2')
        h3 = self.addHost('h3')
        h4 = self.addHost('h4')
        h5 = self.addHost('h5')
        h6 = self.addHost('h6')
        s1 = self.addSwitch('s1')
        s2 = self.addSwitch('s2')
        self.addLink(h1, s1, 1, 1)
        self.addLink(h2, s1, 1, 2)
        self.addLink(h3, s1, 1, 3)
        self.addLink(s1, s2, 4, 4)
        self.addLink(h4, s2, 1, 1)
        self.addLink(h5, s2, 1, 2)
        self.addLink(h6, s2, 1, 3)
topos = {'mytopo': (lambda: MyTopo())}

输入命令创建拓扑图

sudo mn --custom sdn6.py --topo mytopo --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13

连接ryu

ryu-manager ofctl_rest.py

2.使用Ryu的REST API下发流表实现和第2次实验同样的VLAN

编写脚本

#端口号1发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":1
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4096            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号2发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":2
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4097            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号3发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":3
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4098            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add



#向端口1转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "0"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 1
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口2转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "1"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 2
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口3转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "2"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 3
        }
    ]
}' http://localhost:8080/stats/flowentry/add

查看流表

sudo ovs-ofctl -O OpenFlow13 dump-flows s1
sudo ovs-ofctl -O OpenFlow13 dump-flows s2

测试连通性

3.对比两种方法，写出你的实验体会

一度做到崩溃，中间出一点错误就要重新做，对比一下这两种方法，感觉ryu比较方便。