proxySQL with SemiSync

环境信息

hostname IP port role comm
ms81 192.168.188.81 3399 master
ms82 192.168.188.82 3399 slave
ms83 192.168.188.83 3399 slave
ms84 192.168.188.84 6033 proxysql&sysbench
  • ProxySQL version 2.0.11-124-g971c15e, codename Truls
  • MySQL 8.0.19 x86_64
  • CentOS 7.8.2003 on Docker

配置半同步

  • ms81 配置环境

    [10:46:55] root@ms81:~ # ./mysql_onekey_3.2.1.sh /opt/mysql-8.0.19-linux-glibc2.12-x86_64 3399

##ms81
[10:51:30] root@ms81:~ # mysql -S /data/mysql/mysql3399/tmp/mysql.sock
mysql> set global super_read_only=0;
Query OK, 0 rows affected (0.00 sec)

mysql> create user 'rep'@'192.168.188.%' identified by 'rep';
Query OK, 0 rows affected (0.02 sec)

mysql> grant replication slave on *.* to 'rep'@'192.168.188.%';
Query OK, 0 rows affected (0.02 sec)

mysql> create user 'proxy'@'192.168.188.%' identified with mysql_native_password by 'proxy';
Query OK, 0 rows affected (0.02 sec)

mysql> grant replication client on *.* to 'proxy'@'192.168.188.%';
Query OK, 0 rows affected (0.02 sec)

mysql> create user 'monitor'@'192.168.188.%' identified with mysql_native_password by 'monitor';
Query OK, 0 rows affected (10.02 sec)

mysql> grant replication client on *.*  to 'monitor'@'192.168.188.%';
Query OK, 0 rows affected (0.02 sec)

mysql> install plugin rpl_semi_sync_master soname 'semisync_master.so';
Query OK, 0 rows affected (0.02 sec)

mysql> install plugin rpl_semi_sync_slave soname 'semisync_slave.so';
Query OK, 0 rows affected (0.02 sec)

mysql> set global  rpl_semi_sync_master_enabled =1;
Query OK, 0 rows affected (0.00 sec)

mysql> show global variables like '%semi%';
+-------------------------------------------+------------+
| Variable_name                             | Value      |
+-------------------------------------------+------------+
| rpl_semi_sync_master_enabled              | ON         |
| rpl_semi_sync_master_timeout              | 10000      |
| rpl_semi_sync_master_trace_level          | 32         |
| rpl_semi_sync_master_wait_for_slave_count | 1          |
| rpl_semi_sync_master_wait_no_slave        | ON         |
| rpl_semi_sync_master_wait_point           | AFTER_SYNC |
| rpl_semi_sync_slave_enabled               | OFF        |
| rpl_semi_sync_slave_trace_level           | 32         |
+-------------------------------------------+------------+
8 rows in set (0.00 sec)

mysql> reset master;
Query OK, 0 rows affected (0.05 sec)

mysql> show master status;
+------------------+----------+--------------+------------------+-------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+------------------+----------+--------------+------------------+-------------------+
| mysql-bin.000001 |      155 |              |                  |                   |
+------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)

  • ms82 配置环境

    [10:51:32] root@ms82:~ # ./mysql_onekey_3.2.1.sh /opt/mysql-8.0.19-linux-glibc2.12-x86_64 3399

##ms82
[10:51:39] root@ms82:~ #  mysql -S /data/mysql/mysql3399/tmp/mysql.sock

mysql> set global super_read_only=0;
Query OK, 0 rows affected (0.00 sec)

mysql>  create user 'rep'@'192.168.188.%' identified by 'rep';
Query OK, 0 rows affected (0.02 sec)

mysql>  grant replication slave on *.* to 'rep'@'192.168.188.%';
Query OK, 0 rows affected (0.02 sec)

mysql> create user 'proxy'@'192.168.188.%' identified with mysql_native_password by 'proxy';
Query OK, 0 rows affected (0.01 sec)

mysql> grant replication client on *.* to 'proxy'@'192.168.188.%';
Query OK, 0 rows affected (0.01 sec)

mysql> create user 'monitor'@'192.168.188.%' identified with mysql_native_password by 'monitor';
Query OK, 0 rows affected (0.01 sec)

mysql> grant replication client on *.*  to 'monitor'@'192.168.188.%';
Query OK, 0 rows affected (0.01 sec)

mysql> install plugin rpl_semi_sync_master soname 'semisync_master.so';
Query OK, 0 rows affected (0.01 sec)

mysql> install plugin rpl_semi_sync_slave soname 'semisync_slave.so';
Query OK, 0 rows affected (0.01 sec)

mysql> set global  rpl_semi_sync_slave_enabled =1;
Query OK, 0 rows affected (0.00 sec)

mysql>  show global variables like '%semi%';
+-------------------------------------------+------------+
| Variable_name                             | Value      |
+-------------------------------------------+------------+
| rpl_semi_sync_master_enabled              | OFF        |
| rpl_semi_sync_master_timeout              | 10000      |
| rpl_semi_sync_master_trace_level          | 32         |
| rpl_semi_sync_master_wait_for_slave_count | 1          |
| rpl_semi_sync_master_wait_no_slave        | ON         |
| rpl_semi_sync_master_wait_point           | AFTER_SYNC |
| rpl_semi_sync_slave_enabled               | ON         |
| rpl_semi_sync_slave_trace_level           | 32         |
+-------------------------------------------+------------+
8 rows in set (0.00 sec)

mysql> reset master;
Query OK, 0 rows affected (0.03 sec)

mysql> change master to master_host='192.168.188.81',master_port=3399,master_user='rep',master_password='rep',master_auto_position=1,get_master_public_key=1;
Query OK, 0 rows affected, 2 warnings (0.07 sec)

mysql> start slave;
Query OK, 0 rows affected (0.03 sec)

  • ms83 配置环境

    [10:51:35] root@ms83:~ # ./mysql_onekey_3.2.1.sh /opt/mysql-8.0.19-linux-glibc2.12-x86_64 3399

##ms83  
同ms82一样，略。

  • master 查看状态

    mysql> show global status like '%semi%';
+--------------------------------------------+-------+
| Variable_name                              | Value |
+--------------------------------------------+-------+
| Rpl_semi_sync_master_clients               | 2     |
| Rpl_semi_sync_master_net_avg_wait_time     | 0     |
| Rpl_semi_sync_master_net_wait_time         | 0     |
| Rpl_semi_sync_master_net_waits             | 0     |
| Rpl_semi_sync_master_no_times              | 0     |
| Rpl_semi_sync_master_no_tx                 | 0     |
| Rpl_semi_sync_master_status                | ON    |
| Rpl_semi_sync_master_timefunc_failures     | 0     |
| Rpl_semi_sync_master_tx_avg_wait_time      | 0     |
| Rpl_semi_sync_master_tx_wait_time          | 0     |
| Rpl_semi_sync_master_tx_waits              | 0     |
| Rpl_semi_sync_master_wait_pos_backtraverse | 0     |
| Rpl_semi_sync_master_wait_sessions         | 0     |
| Rpl_semi_sync_master_yes_tx                | 0     |
| Rpl_semi_sync_slave_status                 | OFF   |
+--------------------------------------------+-------+
15 rows in set (0.00 sec)

配置ProxySQL

  • 安装

    [11:08:20] root@ms84:/ofiles # yum localinstall -y proxysql-2.0.11-1-centos7.x86_64.rpm
[11:19:53] root@ms84:/ofiles # rpm -ql proxysql
/etc/logrotate.d/proxysql
/etc/proxysql.cnf
/etc/systemd/system/proxysql-initial.service
/etc/systemd/system/proxysql.service
/usr/bin/proxysql
/usr/share/proxysql/tools/proxysql_galera_checker.sh
/usr/share/proxysql/tools/proxysql_galera_writer.pl

  • 启动服务
    由于在docker运行，无法使用systemctl，所以在这里查看一下service文件，找到命令行，手动执行。

    [11:21:16] root@ms84:/ofiles # cat /etc/systemd/system/proxysql.service
...
...
[Service]
Type=forking
RuntimeDirectory=proxysql
#PermissionsStartOnly=true
#ExecStartPre=/usr/bin/mkdir -p /var/run/proxysql /var/run/proxysql
#ExecStartPre=/usr/bin/chown -R proxysql: /var/run/proxysql/
ExecStart=/usr/bin/proxysql --idle-threads -c /etc/proxysql.cnf
PIDFile=/var/lib/proxysql/proxysql.pid
#StandardError=null  # all output is in stderr
SyslogIdentifier=proxysql
Restart=no
User=proxysql
Group=proxysql
...
...

[11:23:25] root@ms84:/ofiles # /usr/bin/proxysql --idle-threads -c /etc/proxysql.cnf
2020-05-19 11:23:26 [INFO] Using config file /etc/proxysql.cnf
2020-05-19 11:23:26 [INFO] Using OpenSSL version: OpenSSL 1.1.1d  10 Sep 2019
2020-05-19 11:23:26 [INFO] No SSL keys/certificates found in datadir (/var/lib/proxysql). Generating new keys/certificates.

[11:23:26] root@ms84:/ofiles # ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 10:38 ?        00:00:00 /usr/sbin/sshd -D
root         6     1  0 10:38 ?        00:00:00 sshd: root@pts/0
root         8     6  0 10:38 pts/0    00:00:00 -zsh
root       338     1  0 11:23 ?        00:00:00 /usr/bin/proxysql --idle-threads -c /etc/proxysql.cnf
root       339   338  3 11:23 ?        00:00:00 /usr/bin/proxysql --idle-threads -c /etc/proxysql.cnf
root       368     8  0 11:23 pts/0    00:00:00 ps -ef

[11:23:40] root@ms84:/ofiles # ss -antulp|grep proxy
tcp    LISTEN     0  128  *:6032    *:*     users:(("proxysql",pid=339,fd=40))
tcp    LISTEN     0  128  *:6033    *:*     users:(("proxysql",pid=339,fd=36))
tcp    LISTEN     0  128  *:6033    *:*     users:(("proxysql",pid=339,fd=35))
tcp    LISTEN     0  128  *:6033    *:*     users:(("proxysql",pid=339,fd=34))
tcp    LISTEN     0  128  *:6033    *:*     users:(("proxysql",pid=339,fd=32))

  • 配置ProxySQL

    • 通过管理端口登录ProxySQL的sqlite
      [11:23:48] root@ms84:/ofiles # mysql -h 127.0.0.1 -P 6032 -uadmin -padmin
    • 查看一下sqlite的结构
      mysql> show tables;
+----------------------------------------------------+
| tables                                             |
+----------------------------------------------------+
| global_variables                                   |
| mysql_aws_aurora_hostgroups                        |
| mysql_collations                                   |
| mysql_firewall_whitelist_rules                     |
| mysql_firewall_whitelist_sqli_fingerprints         |
| mysql_firewall_whitelist_users                     |
| mysql_galera_hostgroups                            |
| mysql_group_replication_hostgroups                 |
| mysql_query_rules                                  |
| mysql_query_rules_fast_routing                     |
| mysql_replication_hostgroups                       |
| mysql_servers                                      |
| mysql_users                                        |
| proxysql_servers                                   |
| restapi_routes                                     |
| runtime_checksums_values                           |
| runtime_global_variables                           |
| runtime_mysql_aws_aurora_hostgroups                |
| runtime_mysql_firewall_whitelist_rules             |
| runtime_mysql_firewall_whitelist_sqli_fingerprints |
| runtime_mysql_firewall_whitelist_users             |
| runtime_mysql_galera_hostgroups                    |
| runtime_mysql_group_replication_hostgroups         |
| runtime_mysql_query_rules                          |
| runtime_mysql_query_rules_fast_routing             |
| runtime_mysql_replication_hostgroups               |
| runtime_mysql_servers                              |
| runtime_mysql_users                                |
| runtime_proxysql_servers                           |
| runtime_restapi_routes                             |
| runtime_scheduler                                  |
| scheduler                                          |
+----------------------------------------------------+
32 rows in set (0.00 sec)

mysql> select database();
+------------+
| DATABASE() |
+------------+
| admin      |
+------------+
1 row in set (0.00 sec)

mysql> show databases;
+-----+---------------+-------------------------------------+
| seq | name          | file                                |
+-----+---------------+-------------------------------------+
| 0   | main          |                                     |
| 2   | disk          | /var/lib/proxysql/proxysql.db       |
| 3   | stats         |                                     |
| 4   | monitor       |                                     |
| 5   | stats_history | /var/lib/proxysql/proxysql_stats.db |
+-----+---------------+-------------------------------------+
5 rows in set (0.00 sec)
    • 配置读写组
      mysql> use main;

mysql> show create table mysql_replication_hostgroups\G
*************************** 1. row ***************************
    table: mysql_replication_hostgroups
Create Table: CREATE TABLE mysql_replication_hostgroups (
    writer_hostgroup INT CHECK (writer_hostgroup>=0) NOT NULL PRIMARY KEY,
    reader_hostgroup INT NOT NULL CHECK (reader_hostgroup<>writer_hostgroup AND reader_hostgroup>=0),
    check_type VARCHAR CHECK (LOWER(check_type) IN ('read_only','innodb_read_only','super_read_only','read_only|innodb_read_only','read_only&innodb_read_only')) NOT NULL DEFAULT 'read_only',
    comment VARCHAR NOT NULL DEFAULT '', UNIQUE (reader_hostgroup))
1 row in set (0.00 sec)

mysql> insert into mysql_replication_hostgroups(writer_hostgroup, reader_hostgroup,comment) values (100,101,'proxy');
Query OK, 1 row affected (0.00 sec)

mysql> select * from mysql_replication_hostgroups;
+------------------+------------------+------------+---------+
| writer_hostgroup | reader_hostgroup | check_type | comment |
+------------------+------------------+------------+---------+
| 100              | 101              | read_only  | proxy   |
+------------------+------------------+------------+---------+
1 row in set (0.00 sec)
    • 添加成员
      mysql> show create table mysql_servers \G
*************************** 1. row ***************************
    table: mysql_servers
Create Table: CREATE TABLE mysql_servers (
    hostgroup_id INT CHECK (hostgroup_id>=0) NOT NULL DEFAULT 0,
    hostname VARCHAR NOT NULL,
    port INT CHECK (port >= 0 AND port <= 65535) NOT NULL DEFAULT 3306,
    gtid_port INT CHECK ((gtid_port <> port OR gtid_port=0) AND gtid_port >= 0 AND gtid_port <= 65535) NOT NULL DEFAULT 0,
    status VARCHAR CHECK (UPPER(status) IN ('ONLINE','SHUNNED','OFFLINE_SOFT', 'OFFLINE_HARD')) NOT NULL DEFAULT 'ONLINE',
    weight INT CHECK (weight >= 0 AND weight <=10000000) NOT NULL DEFAULT 1,
    compression INT CHECK (compression IN(0,1)) NOT NULL DEFAULT 0,
    max_connections INT CHECK (max_connections >=0) NOT NULL DEFAULT 1000,
    max_replication_lag INT CHECK (max_replication_lag >= 0 AND max_replication_lag <= 126144000) NOT NULL DEFAULT 0,
    use_ssl INT CHECK (use_ssl IN(0,1)) NOT NULL DEFAULT 0,
    max_latency_ms INT UNSIGNED CHECK (max_latency_ms>=0) NOT NULL DEFAULT 0,
    comment VARCHAR NOT NULL DEFAULT '',
    PRIMARY KEY (hostgroup_id, hostname, port) )
1 row in set (0.00 sec)

mysql> insert into mysql_servers(hostgroup_id,hostname,port,max_connections) values (100,'192.168.188.81',3399,200);
Query OK, 1 row affected (0.00 sec)

mysql> insert into mysql_servers(hostgroup_id,hostname,port,max_connections) values (101,'192.168.188.82',3399,200);
Query OK, 1 row affected (0.00 sec)

mysql> insert into mysql_servers(hostgroup_id,hostname,port,max_connections) values (101,'192.168.188.83',3399,200);
Query OK, 1 row affected (0.00 sec)

mysql> mysql> select * from mysql_servers;
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| hostgroup_id | hostname       | port | gtid_port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| 100          | 192.168.188.81 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.82 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.83 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
3 rows in set (0.00 sec)
    • 配置ProxySQL User
      mysql> show create table mysql_users\G
*************************** 1. row ***************************
    table: mysql_users
Create Table: CREATE TABLE mysql_users (
    username VARCHAR NOT NULL,
    password VARCHAR,
    active INT CHECK (active IN (0,1)) NOT NULL DEFAULT 1,
    use_ssl INT CHECK (use_ssl IN (0,1)) NOT NULL DEFAULT 0,
    default_hostgroup INT NOT NULL DEFAULT 0,
    default_schema VARCHAR,
    schema_locked INT CHECK (schema_locked IN (0,1)) NOT NULL DEFAULT 0,
    transaction_persistent INT CHECK (transaction_persistent IN (0,1)) NOT NULL DEFAULT 1,
    fast_forward INT CHECK (fast_forward IN (0,1)) NOT NULL DEFAULT 0,
    backend INT CHECK (backend IN (0,1)) NOT NULL DEFAULT 1,
    frontend INT CHECK (frontend IN (0,1)) NOT NULL DEFAULT 1,
    max_connections INT CHECK (max_connections >=0) NOT NULL DEFAULT 10000,
    comment VARCHAR NOT NULL DEFAULT '',
    PRIMARY KEY (username, backend),
    UNIQUE (username, frontend))
1 row in set (0.00 sec)

mysql> insert into mysql_users(username,password,default_hostgroup,default_schema,max_connections) values ('proxy','proxy',100,'kk',1000);
Query OK, 1 row affected (0.00 sec)

此时查看monitor.mysql_server_ping_log，可以发现已经通了  

mysql> select * from monitor.mysql_server_ping_log;
+----------------+------+------------------+----------------------+------------+
| hostname       | port | time_start_us    | ping_success_time_us | ping_error |
+----------------+------+------------------+----------------------+------------+
| 192.168.188.81 | 3399 | 1589859157227913 | 350                  | NULL       |
| 192.168.188.81 | 3399 | 1589859166912107 | 376                  | NULL       |
| 192.168.188.82 | 3399 | 1589859167034376 | 415                  | NULL       |
| 192.168.188.83 | 3399 | 1589859167157356 | 235                  | NULL       |
| 192.168.188.81 | 3399 | 1589859176911261 | 449                  | NULL       |
| 192.168.188.82 | 3399 | 1589859177009697 | 565                  | NULL       |
| 192.168.188.83 | 3399 | 1589859177108172 | 377                  | NULL       |
| 192.168.188.82 | 3399 | 1589859186911860 | 625                  | NULL       |
...
...
+----------------+------+------------------+----------------------+------------+
154 rows in set (0.00 sec)

在master和slave上也能看到monitor@ms84连接信息了  

mysql> show processlist;
+----+-----------------+-------------------+------+------------------+------+---------------------------------------------------------------+------------------+
| Id | User            | Host              | db   | Command          | Time | State                                                         | Info             |
+----+-----------------+-------------------+------+------------------+------+---------------------------------------------------------------+------------------+
|  4 | event_scheduler | localhost         | NULL | Daemon           | 3071 | Waiting on empty queue                                        | NULL             |
|  8 | root            | localhost         | NULL | Query            |    0 | starting                                                      | show processlist |
|  9 | rep             | ms82.net188:52954 | NULL | Binlog Dump GTID | 2289 | Master has sent all binlog to slave; waiting for more updates | NULL             |
| 10 | rep             | ms83.net188:43038 | NULL | Binlog Dump GTID | 2158 | Master has sent all binlog to slave; waiting for more updates | NULL             |
| 11 | monitor         | ms84.net188:55902 | NULL | Sleep            |    6 |                                                               | NULL             |
+----+-----------------+-------------------+------+------------------+------+---------------------------------------------------------------+------------------+
5 rows in set (0.00 sec)

这一步要注意，mysql_users里的用户，是通过ProxySQL登录的用户，对应的在MySQL层面，也要配置相应的权限，做到前后端一致。  
mysql> grant all privileges on kk.* to 'proxy'@'192.168.188.%';
Query OK, 0 rows affected (0.02 sec)

  • 加载配置到runtime

    mysql> load mysql users to run;
Query OK, 0 rows affected (0.00 sec)

mysql> load mysql servers to run;
Query OK, 0 rows affected (0.00 sec)

mysql> load mysql variables to run;
Query OK, 0 rows affected (0.00 sec)

mysql> save mysql users to disk;
Query OK, 0 rows affected (0.02 sec)

mysql> save mysql servers to disk;
Query OK, 0 rows affected (0.11 sec)

mysql> save mysql variables to disk;
Query OK, 152 rows affected (0.03 sec)

  • 读写组的切换实践

    • 此时查看mysql servers，会发现三个节点的Hg都变成了101
      因为三个节点都是read_only=1，monitor发现状态后，根据mysql_replication_hostgroups 读写组的配置规则，检测read_only的状态后，将变更到只读组。

      mysql> select * from mysql_servers;
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| hostgroup_id | hostname       | port | gtid_port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| 101          | 192.168.188.81 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.83 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.82 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
3 rows in set (0.00 sec)

    • 将master节点改为读写，然后去ProxySQL查看mysql servers表
      可以看到，随着master节点转为读写模式，ProxySQL检测到状态变更后，自动将ms81加入到读写组101。

      master：mysql> set global read_only=0;
Query OK, 0 rows affected (0.00 sec)

mysql> select * from mysql_servers;
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| hostgroup_id | hostname       | port | gtid_port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
| 101          | 192.168.188.82 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 100          | 192.168.188.81 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.83 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
| 101          | 192.168.188.81 | 3399 | 0         | ONLINE | 1      | 0           | 200             | 0                   | 0       | 0              |         |
+--------------+----------------+------+-----------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+
4 rows in set (0.01 sec)

    • 默认的，读写节点也会同时存在于只读组
      如果想禁止这个特性，可以调整参数后，重启生效

      #为false则读写节点不会存在于只读组  
mysql> show variables like '%also%';
+-------------------------------------+-------+
| Variable_name                       | Value |
+-------------------------------------+-------+
| mysql-monitor_writer_is_also_reader | true  |
+-------------------------------------+-------+
1 row in set (0.00 sec)

    • 用sysbench创建结构

      [13:37:29] root@ms84:~ # sysbench /usr/share/sysbench/oltp_read_write.lua --mysql-host=192.168.188.84 --mysql-port=6033 --mysql-user=proxy --mysql-password=proxy --db-driver=mysql --mysql-db=kk --table-size=5000 prepare
sysbench 1.0.17 (using system LuaJIT 2.0.4)

Creating table 'sbtest1'...
Inserting 5000 records into 'sbtest1'
Creating a secondary index on 'sbtest1'...
[13:37:46] root@ms84:~ # sysbench /usr/share/sysbench/oltp_read_write.lua --mysql-host=192.168.188.84 --mysql-port=6033 --mysql-user=proxy --mysql-password=proxy --db-driver=mysql --mysql-db=kk --table-size=5000 run   
sysbench 1.0.17 (using system LuaJIT 2.0.4)

Running the test with following options:
Number of threads: 1
Initializing random number generator from current time

    • 查看ProxySQL
      可以看到，所有的请求都运行在100组（读写组）

      mysql> select hostgroup, digest, digest_text, count_star, first_seen, last_seen from stats.stats_mysql_query_digest;
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| hostgroup | digest             | digest_text                                                        | count_star | first_seen | last_seen  |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| 100       | 0xE52A0A0210634DAC | INSERT INTO sbtest1 (id, k, c, pad) VALUES (?, ?, ?, ?)            | 651        | 1589866799 | 1589866809 |
| 100       | 0xE365BEB555319B9E | DELETE FROM sbtest1 WHERE id=?                                     | 651        | 1589866799 | 1589866809 |
| 100       | 0xFB239BC95A23CA36 | UPDATE sbtest1 SET c=? WHERE id=?                                  | 651        | 1589866799 | 1589866809 |
| 100       | 0xC198E52BCCB481C7 | UPDATE sbtest1 SET k=k+? WHERE id=?                                | 651        | 1589866799 | 1589866809 |
| 100       | 0xDBF868B2AA296BC5 | SELECT SUM(k) FROM sbtest1 WHERE id BETWEEN ? AND ?                | 651        | 1589866799 | 1589866809 |
| 100       | 0x290B92FD743826DA | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ?                     | 651        | 1589866799 | 1589866809 |
| 100       | 0xC19480748AE79B4B | SELECT DISTINCT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c | 651        | 1589866799 | 1589866809 |
| 100       | 0xBF001A0C13781C1D | SELECT c FROM sbtest1 WHERE id=?                                   | 6501       | 1589866799 | 1589866809 |
| 100       | 0x695FBF255DBEB0DD | COMMIT                                                             | 651        | 1589866799 | 1589866809 |
| 100       | 0xAC80A5EA0101522E | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c          | 651        | 1589866799 | 1589866809 |
| 100       | 0xFAD1519E4760CBDE | BEGIN                                                              | 651        | 1589866799 | 1589866809 |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
11 rows in set (0.00 sec)

  • 配置读写分离

    • 先查看一下规则表的表结构

      # https://github.com/sysown/proxysql/wiki/Main-(runtime)#mysql_query_rules
mysql> show create table mysql_query_rules\G
*************************** 1. row ***************************
    table: mysql_query_rules
Create Table: CREATE TABLE mysql_query_rules (
    rule_id INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL,    --规则id
    active INT CHECK (active IN (0,1)) NOT NULL DEFAULT 0,  --查询处理模块将仅考虑active = 1的规则，并且仅将active规则加载到运行时。
    username VARCHAR,                                       --匹配用户名的过滤条件。 如果为非NULL，则仅当使用正确的用户名建立连接时，查询才会匹配。
    schemaname VARCHAR,                                     --符合标准名称的过滤条件。 如果为非NULL，则仅当连接使用schemaname作为默认架构时查询才匹配
    flagIN INT CHECK (flagIN >= 0) NOT NULL DEFAULT 0,      --flagIN，flagOUT，应用-这些使我们能够创建一个“规则链”，一个接一个地应用。 输入标志值设置为0，并且仅在开始时考虑flagIN = 0的规则。 当为特定查询找到匹配规则时，将评估flagOUT，如果NOT NULL，则将在flagOUT中使用指定的标志来标记查询。 如果flagOUT与flagIN不同，则查询将退出当前链，并输入具有flagIN作为新输入标志的新规则链。 如果flagOUT与flagIN匹配，则将针对带有该flagIN的第一条规则再次重新评估查询。 直到不再有匹配的规则，或者将apply设置为1时，这才发生（这意味着这是最后一个要应用的规则）
    client_addr VARCHAR,                                    --match traffic from a specific source，匹配特定来源。
    proxy_addr VARCHAR,                                     --match incoming traffic on a specific local IP，匹配特定本地IP的入口。
    proxy_port INT CHECK (proxy_port >= 0 AND proxy_port <= 65535),   --匹配特定本地端口 
    digest VARCHAR,                         --match queries with a specific digest, as returned by stats_mysql_query_digest.digest。
    match_digest VARCHAR,                                   --通过正则表达式匹配digest
    match_pattern VARCHAR,                                  --通过正则表达式匹配sql文本
    negate_match_pattern INT CHECK (negate_match_pattern IN (0,1)) NOT NULL DEFAULT 0, --如果为1，则只有与sql文本不匹配的查询才被视为匹配项。 在与match_pattern或match_digest匹配的正则表达式前面，这充当NOT运算符
    re_modifiers VARCHAR DEFAULT 'CASELESS',                --看起来很复杂的样子。
    flagOUT INT CHECK (flagOUT >= 0), replace_pattern VARCHAR CHECK(CASE WHEN replace_pattern IS NULL THEN 1 WHEN replace_pattern IS NOT NULL AND match_pattern IS NOT NULL THEN 1 ELSE 0 END),
    destination_hostgroup INT DEFAULT NULL,                 --将匹配的查询路由到该主机组。 除非存在已启动的事务，并且已登录的用户将transaction_persistent标志设置为1（请参见mysql_users表），否则将发生这种情况。
    cache_ttl INT CHECK(cache_ttl > 0),                     --the number of milliseconds for which to cache the result of the query. Note: in ProxySQL 1.1 cache_ttl was in seconds
    cache_empty_result INT CHECK (cache_empty_result IN (0,1)) DEFAULT NULL,
    cache_timeout INT CHECK(cache_timeout >= 0),            --
    reconnect INT CHECK (reconnect IN (0,1)) DEFAULT NULL,
    timeout INT UNSIGNED CHECK (timeout >= 0),              --执行匹配或重写查询的最大超时（以毫秒为单位）。 如果查询的运行时间超过特定阈值，则会自动终止该查询。 如果未指定超时，则应用全局变量mysql-default_query_timeout。
    retries INT CHECK (retries>=0 AND retries <=1000),      --在执行查询期间检测到失败的情况下，需要重新执行查询的最大次数。 如果未指定重试，则应用全局变量mysql-query_retries_on_failure
    delay INT UNSIGNED CHECK (delay >=0),                   --延迟查询执行的毫秒数。是一种限制机制和QoS，允许优先处理某些查询而不是其他查询。 该值被添加到适用于所有查询的mysql-default_query_delay全局变量中。 未来版本的ProxySQL将提供更高级的限制机制。
    next_query_flagIN INT UNSIGNED,
    mirror_flagOUT INT UNSIGNED,
    mirror_hostgroup INT UNSIGNED,
    error_msg VARCHAR,
    OK_msg VARCHAR,
    sticky_conn INT CHECK (sticky_conn IN (0,1)),
    multiplex INT CHECK (multiplex IN (0,1,2)),             --如果为0，将禁用多路复用。 如果为1，则在没有其他条件阻止这种情况（例如用户变量或事务）的情况下，可以重新启用Multiplex。 如果为2，则仅对当前查询不禁用多路复用。 请参见Wiki。默认为NULL，因此不修改多路复用策略。
    gtid_from_hostgroup INT UNSIGNED,
    log INT CHECK (log IN (0,1)),
    apply INT CHECK(apply IN (0,1)) NOT NULL DEFAULT 0,  --当设置为1时，在匹配并处理此规则后将不再评估其他查询（注意：此后将不再评估mysql_query_rules_fast_routing规则）
    comment VARCHAR)
1 row in set (0.00 sec)

    • 根据sql匹配正则表达式，并加载到runtime

      mysql> insert into mysql_query_rules(rule_id,active,match_pattern,destination_hostgroup,apply) values(1,1,'^SELECT.*FOR UPDATE$',100,1);
Query OK, 1 row affected (0.00 sec)

mysql> insert into mysql_query_rules(rule_id,active,match_pattern,destination_hostgroup,apply) values(2,1,'^SELECT',101,1);
Query OK, 1 row affected (0.00 sec)

mysql> select rule_id,active,match_pattern,destination_hostgroup,apply from mysql_query_rules;
+---------+--------+----------------------+-----------------------+-------+
| rule_id | active | match_pattern        | destination_hostgroup | apply |
+---------+--------+----------------------+-----------------------+-------+
| 1       | 1      | ^SELECT.*FOR UPDATE$ | 100                   | 1     |
| 2       | 1      | ^SELECT              | 101                   | 1     |
+---------+--------+----------------------+-----------------------+-------+
2 rows in set (0.00 sec)

mysql> load mysql query rules to run;
Query OK, 0 rows affected (0.00 sec)

mysql> save mysql query rules to disk;
Query OK, 0 rows affected (0.04 sec)

    • 使用sysbench运行事务，并查看stats.mysql_query_digest

      [14:31:03] root@ms84:~ # sysbench /usr/share/sysbench/oltp_read_write.lua --mysql-host=192.168.188.84 --mysql-port=6033 --mysql-user=proxy --mysql-password=proxy --db-driver=mysql --mysql-db=kk --table-size=5000  run            
sysbench 1.0.17 (using system LuaJIT 2.0.4)

mysql> select * from stats.stats_mysql_query_digest_reset;
Empty set (0.00 sec)

mysql> select hostgroup, digest, digest_text, count_star, first_seen, last_seen from stats.stats_mysql_query_digest;
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| hostgroup | digest             | digest_text                                                        | count_star | first_seen | last_seen  |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| 100       | 0xE52A0A0210634DAC | INSERT INTO sbtest1 (id, k, c, pad) VALUES (?, ?, ?, ?)            | 409        | 1589870243 | 1589870250 |
| 100       | 0xFB239BC95A23CA36 | UPDATE sbtest1 SET c=? WHERE id=?                                  | 409        | 1589870243 | 1589870250 |
| 100       | 0xC198E52BCCB481C7 | UPDATE sbtest1 SET k=k+? WHERE id=?                                | 409        | 1589870243 | 1589870250 |
| 101       | 0xC19480748AE79B4B | SELECT DISTINCT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c | 409        | 1589870243 | 1589870250 |
| 100       | 0xE365BEB555319B9E | DELETE FROM sbtest1 WHERE id=?                                     | 409        | 1589870243 | 1589870250 |
| 101       | 0xAC80A5EA0101522E | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c          | 409        | 1589870243 | 1589870250 |
| 101       | 0xDBF868B2AA296BC5 | SELECT SUM(k) FROM sbtest1 WHERE id BETWEEN ? AND ?                | 409        | 1589870243 | 1589870250 |
| 101       | 0x290B92FD743826DA | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ?                     | 409        | 1589870243 | 1589870250 |
| 101       | 0xBF001A0C13781C1D | SELECT c FROM sbtest1 WHERE id=?                                   | 4087       | 1589870243 | 1589870250 |
| 100       | 0x695FBF255DBEB0DD | COMMIT                                                             | 409        | 1589870243 | 1589870250 |
| 100       | 0xFAD1519E4760CBDE | BEGIN                                                              | 410        | 1589870243 | 1589870250 |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
11 rows in set (0.01 sec)

    • 针对特定SQL进行读写分离规则（生产环境强烈建议使用此模式）
      因为生产环境业务情况较为固定，SQL类别总体上有一个固定范围。根据业务情况，并不是将所有读写进行分离就是最佳方案，很多时候只许将特定的一些SQL集路由到slave上进行读，而大部分业务还保留在主库。
      这时便用上了基于digest进行读写分离的规则。一般将特别大事务量的查询，或特别频繁的查询路由到slave上。
      不过digest是完全正则匹配， 如果出现大小写、多空格等情况，生成的digest是不同的，无法利用上规则

      比如，上一个实验里，0xBF001A0C13781C1D 这个sql运行了4087次，其它sql都远低于该值。那么我们就为这个sql指定规则。

      mysql> insert into mysql_query_rules(rule_id,active,digest,destination_hostgroup,apply) values(3,1,'0xBF001A0C13781C1D',101,1);
Query OK, 1 row affected (0.00 sec)

mysql> update mysql_query_rules set active=0 , apply=0 where rule_id in (1,2);
Query OK, 2 rows affected (0.00 sec)

mysql> select rule_id,active,digest,destination_hostgroup,apply from mysql_query_rules;
+---------+--------+--------------------+-----------------------+-------+
| rule_id | active | digest             | destination_hostgroup | apply |
+---------+--------+--------------------+-----------------------+-------+
| 1       | 0      | NULL               | 100                   | 0     |
| 2       | 0      | NULL               | 101                   | 0     |
| 3       | 1      | 0xBF001A0C13781C1D | 101                   | 1     |
+---------+--------+--------------------+-----------------------+-------+
3 rows in set (0.00 sec)

mysql> select * from stats.stats_mysql_query_digest_reset;
Empty set (0.00 sec)

mysql> load mysql query rules to run;
Query OK, 0 rows affected (0.00 sec)

mysql> save mysql query rules to disk;
Query OK, 0 rows affected (0.04 sec)

    • 使用sysbench运行事务，并查看stats.mysql_query_digest
      可以看到，0xBF001A0C13781C1D已经被路由到slave，其它事务不受影响，依然在master进行。

      [14:58:57] root@ms84:~ # sysbench /usr/share/sysbench/oltp_read_write.lua --mysql-host=192.168.188.84 --mysql-port=6033 --mysql-user=proxy --mysql-password=proxy --db-driver=mysql --mysql-db=kk --table-size=5000  run

mysql> select hostgroup, digest, digest_text, count_star, first_seen, last_seen from stats.stats_mysql_query_digest;
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| hostgroup | digest             | digest_text                                                        | count_star | first_seen | last_seen  |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
| 100       | 0xE52A0A0210634DAC | INSERT INTO sbtest1 (id, k, c, pad) VALUES (?, ?, ?, ?)            | 653        | 1589871539 | 1589871549 |
| 100       | 0xE365BEB555319B9E | DELETE FROM sbtest1 WHERE id=?                                     | 653        | 1589871539 | 1589871549 |
| 100       | 0xFB239BC95A23CA36 | UPDATE sbtest1 SET c=? WHERE id=?                                  | 653        | 1589871539 | 1589871549 |
| 100       | 0xC198E52BCCB481C7 | UPDATE sbtest1 SET k=k+? WHERE id=?                                | 653        | 1589871539 | 1589871549 |
| 100       | 0xC19480748AE79B4B | SELECT DISTINCT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c | 653        | 1589871539 | 1589871549 |
| 100       | 0xDBF868B2AA296BC5 | SELECT SUM(k) FROM sbtest1 WHERE id BETWEEN ? AND ?                | 653        | 1589871539 | 1589871549 |
| 100       | 0x290B92FD743826DA | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ?                     | 653        | 1589871539 | 1589871549 |
| 101       | 0xBF001A0C13781C1D | SELECT c FROM sbtest1 WHERE id=?                                   | 6521       | 1589871539 | 1589871549 |
| 100       | 0x695FBF255DBEB0DD | COMMIT                                                             | 653        | 1589871539 | 1589871549 |
| 100       | 0xAC80A5EA0101522E | SELECT c FROM sbtest1 WHERE id BETWEEN ? AND ? ORDER BY c          | 653        | 1589871539 | 1589871549 |
| 100       | 0xFAD1519E4760CBDE | BEGIN                                                              | 653        | 1589871539 | 1589871549 |
+-----------+--------------------+--------------------------------------------------------------------+------------+------------+------------+
11 rows in set (0.01 sec)
posted @ 2020-08-27 15:14  孔个个  阅读(144)  评论(0)  编辑  收藏  举报