路由器密码重置
关闭路由器电源,开启后60S内,按CTRL+C 组合键进入monitor模式
Self decompressing the image :
############
monitor: command "boot" aborted due to user interrupt
rommon 1 >
进入之后使用命令confreg修改寄存器的值
rommon 2 > confreg 0x2142
使用reset命令重启
rommon 3 > reset
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
cisco 2811 (MPC860) processor (revision 0x200) with 60416K/5120K bytes of memory
Self decompressing the image :
########################################################################## [OK]
重启完成后,进入特权模式将配置文件导入到内存
Router#copy startup-config running-config
Destination filename [running-config]?
514 bytes copied in 0.416 secs (1235 bytes/sec)
Router#
此时已经可不用密码进入全局配置模式,使用enable password 来更改密码
Router(config)#enable password abc123
退出到特权模式 将内存写入到配置文件
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
关闭路由器电源,再次进入monitor模式,将寄存器的值改回原来的值
rommon 2 > confreg 0x2102
rommon 3 > reset
重启后便可用修改后的密码进入路由器全局配置模式