使用UMDH查找内存泄露
参考文献：
1、http://blog.csdn.net/wcjy07220114/article/details/6962140
2、http://blog.csdn.net/chenyujing1234/article/details/11918987
3、http://www.cnblogs.com/yujiang2011/archive/2011/09/14/2176771.html
内存泄漏工具(VLD)使用说明
Using UMDH to Find a User-Mode Memory Leak
The user-mode dump heap (UMDH) utility works with the operating system to analyze Windows heap allocations for a specific process. UMDH locates which routine in a specific process is leaking memory.
UMDH is included in Debugging Tools for Windows. For full details, see UMDH.
Preparing to Use UMDH
If you have not already determined which process is leaking memory, do that first. For details, see Using Performance Monitor to Find User-Mode Memory Leaks.
The most important data in the UMDH logs are the stack traces of the heap allocations. To determine whether a process is leaking heap memory, analyze these stack traces.
Before using UMDH to display the stack trace data, you must use GFlags to configure your system properly. GFlags is included in Debugging Tools for Windows.
The following GFlags settings enable UMDH stack traces:
- In the GFlags graphical interface, choose the Image File tab, type the process name (including the file name extension), press the TAB key, select Create user mode stack
trace database, and then click Apply.
Or, equivalently, use the following GFlags command line, where ImageName is the process name (including the file name extension):
-
By default, the amount of stack trace data that Windows gathers is limited to 32 MB on an x86 processor, and 64 MB on an x64 or Itanium-based processor. If you must increase the size of this database, choose the Image File tab in the GFlags graphical interface, type the process name, press the TAB key, check the Stack Backtrace (Megs) check box, type a value (in MB) in the associated text box, and then clickApply. Increase this database only when necessary, because it may deplete limited Windows resources. When you no longer need the larger size, return this setting to its original value.
-
If you changed any flags on the System Registry tab, you must restart Windows to make these changes effective. If you changed any flags on the Image File tab, you must restart the process to make the changes effective. Changes to the Kernel Flagstab are effective immediately, but they are lost the next time Windows restarts.
Before using UMDH, you must have access to the proper symbols for your application. UMDH uses the symbol path specified by the environment variable _NT_SYMBOL_PATH. Set this variable equal to a path containing the symbols for your application. If you also include a path to Windows symbols, the analysis may be more complete. The syntax for this symbol path is the same as that used by the debugger; for details, see Symbol Path.
For example, if the symbols for your application are located at C:\MySymbols, and you want to use the public Microsoft symbol store for your Windows symbols, using C:\MyCache as your downstream store, you would use the following command to set your symbol path:
In addition, to assure accurate results, you must disable BSTR caching. To do this, set the OANOCACHE environment variable equal to one (1). Make this setting before you launch the application whose allocations are to be traced.
If you need to trace the allocations made by a service, you must set OANOCACHE as a system environment variable and then restart Windows for this setting to take effect.
On Windows 2000, in addition to setting OANOCACHE equal to 1, you must also install the hotfix available with KB 139071. This hotfix is not needed on Windows XP and later versions of Windows.
Detecting Increases in Heap Allocations with UMDH
After making these preparations, you can use UMDH to capture information about the heap allocations of a process. To do so, follow this procedure:
-
Determine the process ID (PID) for the process you want to investigate.
- Use UMDH to analyze the heap memory allocations for this process, and save it to a log file. Use the -p switch with the PID, and the -f switch with the name of the log file. For example, if the PID is 124, and you want to name the log file Log1.txt, use the following command:
-
Use Notepad or another program to open the log file. This file contains the call stack for each heap allocation, the number of allocations made through that call stack, and the number of bytes consumed through that call stack.
- Because you are looking for a memory leak, the contents of a single log file are not sufficient. You must compare log files recorded at different times to determine which allocations are growing.
UMDH can compare two different log files and display the change in their respective allocation sizes. You can use the greater-than symbol (>) to redirect the results into a third text file. You may also want to include the -d option, which converts the byte and allocation counts from hexadecimal to decimal. For example, to compare Log1.txt andLog2.txt, saving the results of the comparison to the file LogCompare.txt, use the following command:
- Open the LogCompare.txt file. Its contents resemble the following:
For each call stack (labeled "BackTrace") in the UMDH log files, there is a comparison made between the two log files. In this example, the first log file (Log1.txt) recorded 0x9DF0 bytes allocated for BackTrace00B53, while the second log file recorded 0xF110 bytes, which means that there were 0x5320 additional bytes allocated between the time the two logs were captured. The bytes came from the call stack identified by BackTrace00B53.
- To determine what is in that backtrace, open one of the original log files (for example,Log2.txt) and search for "BackTrace00B53." The results are similar to this
data:
Copy
00005320 bytes in 0x14 allocations (@ 0x00000428) by: BackTrace00B53 ntdll!RtlDebugAllocateHeap+0x000000FD ntdll!RtlAllocateHeapSlowly+0x0000005A ntdll!RtlAllocateHeap+0x00000808 MyApp!_heap_alloc_base+0x00000069 MyApp!_heap_alloc_dbg+0x000001A2 MyApp!_nh_malloc_dbg+0x00000023 MyApp!_nh_malloc+0x00000016 MyApp!operator new+0x0000000E MyApp!DisplayMyGraphics+0x0000001E MyApp!main+0x0000002C MyApp!mainCRTStartup+0x000000FC KERNEL32!BaseProcessStart+0x0000003D
This UMDH output shows that there were 0x5320 (decimal 21280) total bytes allocated from the call stack. These bytes were allocated from 0x14 (decimal 20) separate allocations of 0x428 (decimal 1064) bytes each.
The call stack is given an identifier of "BackTrace00B53," and the calls in this stack are displayed. In reviewing the call stack, you see that the DisplayMyGraphics routine is allocating memory through the new operator, which calls the routine malloc, which uses the Visual C++ run-time library to obtain memory from the heap.
Determine which of these calls is the last one to explicitly appear in your source code. In this case, it is probably the new operator because the call to malloc occurred as part of the implementation of new rather than as a separate allocation. So this instance of the new operator in the DisplayMyGraphics routine is repeatedly allocating memory that is not being freed.
Send comments about this topic to Microsoft
Build date: 12/1/2010
Umdh 是 Debugging Tools for Windows 里面的一个工具, 可以从下面链接下载http://www.microsoft.com/whdc/devtools/debugging/default.mspx. UMDH主要通过分析比较进程的Heap Stack trace信息来发现内存泄露的。
使用 UMDH 之前
1．设置_NT_SYMBOL_PATH环境变量，例如用命令行：set _NT_SYMBOL_PATH=C:\WINDOWS\Symbols。把你自己程序的Symbol files (.pdb) 文件放在跟你执行文件同一目录，或者加到_NT_SYMBOL_PATH环境变量里面。
2．设置gflags,通过命令gflags -i notepad.exe +ust， gflags也是Debugging Tools for Windows里面一个工具程序。也可以敲入Gflags命令，然后通过界面配置，进入界面后选择Image File, 在Image栏写入执行文件的名字，不需要全路径，例如只要输入notepad.exe, 然后按 TAB键，选中Create user mode stack trace database选项，确认。
转储以捕获堆
1．获得要分析的程序的进程号，比如你的进程号是1234，在命令行输入umdh -p:1234 -f: 1234old.log,得到1234old.log文件。
2．继续运行你的程序，或者说进行你怀疑会有内存泄漏的操作。
3．间隔一段时间后，输入命令umdh -p:1234 -f: 1234new.log。
4．然后运行Umdh -d 1234old.log 1234new.log > cmp1234.txt。
分析比较结果
1.cmp1234.txt就是两个时刻的Heap Stack Trace的差别，它类似于以下信息：
+ 5320 ( f110 - 9df0) 3a allocs BackTrace00053
Total increase == 5320
2.接下来就是查找对应的BackTrace，例如上面的意思是说在BackTrace00053处内存增加了5320个字节，在BackTrace00053你将能找到内存泄露处对应的CallStack。
3.接下来看一下BackTrace00053究竟有什么东西，找到第二个日志文件，在这里就是1234new.log,搜索BackTrace00053， 如果你的Symbol File Path配置正确的话，在BackTrace00053你会发现有类似如下信息：
00005320 bytes in 0x14 allocations (@ 0x00000428) by: BackTrace00053
ntdll!RtlDebugAllocateHeap+0x000000FD
ntdll!RtlAllocateHeapSlowly+0x0000005A
ntdll!RtlAllocateHeap+0x00000808
MyApp!_heap_alloc_base+0x00000069
MyApp!_heap_alloc_dbg+0x000001A2
MyApp!_nh_malloc_dbg+0x00000023
MyApp!_nh_malloc+0x00000016
MyApp!operator new+0x0000000E
MyApp!LeakyFunc+0x0000001E
MyApp!main+0x0000002C
MyApp!mainCRTStartup+0x000000FC
KERNEL32!BaseProcessStart+0x0000003D
上面就是分配那块内存的Stack trace信息，在这里我们看到实在MyApp!LeakyFunc函数里面有个new操作。以上信息说明，在两个日志时间间隔里面，MyApp!LeakyFunc分配了新的内存，但是还没有释放。
下面链接是有关UMDH的视频：http://wm.microsoft.com/ms/mcsp/servicedesk/080702.wmv.
本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/phiger/archive/2007/12/12/1932141.aspx
