随笔- 583 文章- 1 评论- 1115 阅读- 1204万

squid代理http和https方式上网的操作记录

需求说明：公司IDC机房有一台服务器A，只有内网环境：192.168.1.150现在需要让这台服务器能对外访问，能正常访问http和https请求（即80端口和443端口）
操作思路：在IDC机房里另找其他两台有公网环境的服务器B（58.68.250.8/192.168.1.8）和服务器C（58.68.250.5/192.168.1.5），且这两台服务器和内网环境的服务器A能相互ping通。（当然也可以将下面B的http和C机器的https代理环境放在一台机器上部署）其中：
在服务器B上部署squid的http代理，让服务器C通过它的squid代理上网，能成功访问http
在服务器C上部署squid的https代理，让服务器C通过它的squid代理上网，能成功访问https [需要在客户端安装stunnel ]

一、服务器B上的操作记录（http代理）

1）安装squid
yum命令直接在线安装squid
[root@openstack ~]# yum install -y gcc openssl openssl-devel #依赖软件要先提前安装
[root@openstack ~]# yum install squid
 
安装完成后，修改squid.conf 文件中的内容，修改之前可以先备份该文件
[root@openstack ~]# cd /etc/squid/
[root@openstack squid]# cp squid.conf squid.conf_bak
[root@openstack squid]# vim squid.conf
http_access allow all                                                   #修改deny为allow
http_port 192.168.1.8:3128 
cache_dir ufs /var/spool/squid 100 16 256                    #打开这个注释，保证/var/spool/squid这个缓存目录存在
 
2）启动squid，启动前进行测试和初始化
[root@openstack squid]# squid -k parse                    #测试
2016/08/09 13:35:04| Processing Configuration File: /etc/squid/squid.conf (depth 0)
2016/08/09 13:35:04| Processing: acl manager proto cache_object
..............
..............
2016/08/09 13:35:04| Processing: refresh_pattern . 0 20% 4320
2016/08/09 13:35:04| Initializing https proxy context
 
[root@openstack squid]# squid -z                            #初始化
2016/08/09 13:35:12| Creating Swap Directories
 
[root@openstack squid]# /etc/init.d/squid start
Starting squid: . [ OK ]
 
-------------------------------------------------------------------------------------------
如果开启了防火墙iptables规则，则还需要在/etc/sysconfig/iptables里添加下面一行，即允许3128端口访问：
-A INPUT -s 192.168.1.0/24 -p tcp -m state --state NEW -m tcp --dport 3128 -j ACCEPT
--------------------------------------------------------------------------------------------
 
然后重启iptables服务
[root@openstack squid]# /etc/init.d/iptables restart

二、服务器C上的的操作记录（https代理）

1）安装squid
yum命令直接在线安装squid
[root@openstack ~]# yum install -y gcc openssl openssl-devel #依赖软件要先提前安装
[root@openstack ~]# yum install squid
[root@openstack ~]# cd /etc/squid/
[root@openstack squid]# cp squid.conf squid.conf_bak
 
2）现在开始生成加密代理证书:
[root@bastion-IDC squid]# pwd
/etc/squid
[root@bastion-IDC squid]# openssl req -new > lidongbest5.csr
Generating a 2048 bit RSA private key
..........................................................................+++
.........................................................................................................+++
writing new private key to 'privkey.pem'
Enter PEM pass phrase:                                                                   #输入密码，后面会用到，比如这里输入123456
Verifying - Enter PEM pass phrase:
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:cn                                                  #国家
State or Province Name (full name) []:beijing                                       #省份
Locality Name (eg, city) [Default City]:beijing                                      #地区名字
Organization Name (eg, company) [Default Company Ltd]:huanqiu        #公司名
Organizational Unit Name (eg, section) []:Technology                            #部门
Common Name (eg, your name or your server's hostname) []:huanqiu    #CA主机名
Email Address []:wangshibo@xqshijie.cn                                              #邮箱
 
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:123456                                                         #证书请求密钥，CA读取证书的时候需要输入密码
An optional company name []:huanqiu                                                #-公司名称，CA读取证书的时候需要输入名称
 
[root@bastion-IDC squid]# openssl rsa -in privkey.pem -out lidongbest5.key
Enter pass phrase for privkey.pem:                                                     #输入上面设置的密码123456
writing RSA key
 
[root@bastion-IDC squid]# openssl x509 -in lidongbest5.csr -out lidongbest5.crt -req -signkey lidongbest5.key -days 3650
Signature ok
subject=/C=cn/ST=beijing/L=beijing/O=huanqiu/OU=Technology/CN=huanqiu/emailAddress=wangshibo@xqshijie.cn
Getting Private key
 
修改squid.conf配置文件
[root@bastion-IDC squid]# vim squid.conf
http_access allow all #deny修改为allow
#http_port 3128                                                                    #注释掉 
https_port 192.168.1.5:443 cert=/etc/squid/lidongbest5.crt key=/etc/squid/lidongbest5.key            #添加这一行
cache_dir ufs /var/spool/squid 100 16 256                             #打开这个注释，保证/var/spool/squid这个缓存目录存在
 
3）重启squid服务
[root@bastion-IDC squid]# squid -k parse 
[root@bastion-IDC squid]# squid -z
[root@bastion-IDC squid]# squid reload
[root@bastion-IDC squid]# /etc/init.d/squid restart
 
-------------------------------------------------------------------------------------------
如果开启了防火墙iptables规则，则还需要在/etc/sysconfig/iptables里添加下面一行，即允许443端口访问：
-A INPUT -s 192.168.1.0/24 -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT
-------------------------------------------------------------------------------------------
 
然后重启iptables服务
[root@bastion-IDC squid]# /etc/init.d/iptables restart

三、服务器A（即客户端）上的操作记录

1）安装配置stunnel
关闭客户端的iptables防火墙
[root@dev-new-test1 ~]# /etc/init.d/iptables stop
 
[root@dev-new-test1 ~]# cd /usr/local/src/
[root@dev-new-test1 src]# pwd
/usr/local/src
 
 
官网下载：http://www.stunnel.org/downloads.html
百度云盘下载：https://pan.baidu.com/s/1JXqfB7yc6H2GY9qtBVO4iw     提取密码：4kt8
[root@dev-new-test1 ~]#yum install -y openssl openssl-devel gcc
 
[root@dev-new-test1 src]# ls
stunnel-5.45.tar.gz
[root@dev-new-test1 src]# tar -zvxf stunnel-5.45.tar.gz
[root@dev-new-test1 src]# ls
stunnel-5.45 stunnel-5.45.tar.gz
[root@dev-new-test1 src]# cd stunnel-5.45
[root@dev-new-test1 stunnel-5.45]# ./configure
[root@dev-new-test1 stunnel-5.45]# make && make install
 
安装完成后，配置stunnel.conf
[root@dev-new-test1 stunnel-5.45]# cd /usr/local/etc/stunnel/
[root@dev-new-test1 stunnel]# ls
stunnel.conf-sample
[root@dev-new-test1 stunnel]# cp stunnel.conf-sample stunnel.conf
[root@dev-new-test1 stunnel]# ls
stunnel.conf stunnel.conf-sample 
[root@dev-new-test1 stunnel]# cat stunnel.conf              #把原来内容清空，写入：
client = yes
[https]
accept = 127.0.0.1:8088
connect = 192.168.1.5:443                               #运行本机stunnel端口8088连接squid服务端192.168.1.5的443端口，然后在/etc/profile里配置本机8088端口代理（如下）
 
2）启动stunnel服务
[root@dev-new-test1 stunnel]# /usr/local/bin/stunnel /usr/local/etc/stunnel/stunnel.conf
[root@dev-new-test1 stunnel]# ps -ef|grep stunnel
root 20281 1 0 02:23 ? 00:00:00 /usr/local/bin/stunnel /usr/local/etc/stunnel/stunnel.conf
root 20283 13002 0 02:23 pts/0 00:00:00 grep --color stunnel
[root@dev-new-test1 stunnel]# lsof -i:8088
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
stunnel 20281 root 7u IPv4 745475 0t0 TCP localhost:radan-http (LISTEN)
 
3）配置/etc/profile系统环境变量
底部添加下面两行
[root@dev-new-test1 stunnel]# vim /etc/profile 
...............
export http_proxy=http://192.168.1.8:3128                          #这个是通过服务端A机器的3128端口的squid上网（http代理）
export https_proxy=http://127.0.0.1:8088                            #这个是通过服务端B机器的443端口的squid上网（https代理）
 
[root@dev-new-test1 stunnel]# source /etc/profile                   #配置生效
 
4）测试：
[root@dev-new-test1 stunnel]# curl http://www.baidu.com                           #访问80端口ok
[root@dev-new-test1 stunnel]# curl https://www.xqshijie.com                      #访问443端口ok
[root@dev-new-test1 stunnel]# yum list                                                     #yum可以正常使用
[root@dev-new-test1 stunnel]# wget http://www.autohome.com.cn/3442      #wget正常下载

++++++++++++++++++++++++++++++++++++++++++++++++++++

如果客户机是ubuntu系统，则安装配置stunnel记录如下：
root@kevin-KVM:~# apt-get install stunnel4
root@kevin-KVM:~# cd /etc/stunnel/
root@kevin-KVM:/etc/stunnel# ls
README
root@kevin-KVM:/etc/stunnel# vim stunnel.conf    #手动创建该配置文件
client = yes
[https]
accept = 127.0.0.1:8088
connect = 192.168.1.8:443
 
root@kevin-KVM:/etc/stunnel# vim /etc/default/stunnel4
......
ENABLED=1          #默认为0
 
=========================================================
注意：
上面的ENABLED一定要修改为1，否则启动stunne服务时会失败，通过status查看报错为：
5月 27 00:45:56 kevin-KVM systemd[1]: Starting LSB: Start or stop stunnel 4.x (SSL tunnel for network daemons)...
5月 27 00:45:56 kevin-KVM stunnel4[23356]: SSL tunnels disabled, see /etc/default/stunnel4
5月 27 00:45:56 kevin-KVM systemd[1]: Started LSB: Start or stop stunnel 4.x (SSL tunnel for network daemons).
=========================================================
 
接着启动stunne服务
root@kevin-KVM:~# /etc/init.d/stunnel4 start  
root@kevin-KVM:~# /etc/init.d/stunnel4 restart
root@kevin-KVM:/etc/stunnel# lsof -i:8088
COMMAND    PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
stunnel4 23625 root    7u  IPv4 138476      0t0  TCP localhost:omniorb (LISTEN)
 
然后进行代理的环境变量配置
root@kevin-KVM:~# cat /etc/profile
......
export http_proxy=http://192.168.1.8:3128
export https_proxy=http://127.0.0.1:8088
 
root@kevin-KVM:~# source /etc/profile
 
测试上网：
root@kevin-KVM:~# curl http://www.baidu.com
root@kevin-KVM:~# curl https://www.baidu.com