[翻译]——Why my execution plan is not in AWR
2023-09-11 22:59 潇湘隐者 阅读(53) 评论(0) 编辑 收藏 举报为什么我的执行计划不在AWR中呢?本文是Why my execution plan is not in AWR?[1]的翻译,如有翻译不对或翻译不当的地方,敬请指出不足
前一周,我参加“使用AWR报告诊断 Oracle RAC 性能”的网络研讨会时关注到一个问题,有很多人提出了一个问题,为什么他们的SQL_ID存在于dba_hist_active_sess_history (AWR) 中,但他们却无法通过SQL_ID从AWR中获取其相应的执行计划。这是在短短几个月内,我第三次看到有人提出这个了问题。现在是时候回答这个问题了。
为了回答这个问题,我们需要知道 dba_hist_active_sess_history 是从gv$active_session_history (ASH) 获取/采集数据,而 dba_hist_sqlstat 和 cie 从一堆其他动态性能视图中(如 v$sql、v$version 等)获取数据。
在这种情况下,标记为复制到AWR中的行(记录)从 gv$active_session_history 转储到 dba_hist_active_sess_history 中,当然不是真正即时转储,而是具有相对较小的时间延迟,我无法计算具体值。然而,剩余/其它的动态性能视图(v$sql、v$session 等)仅在 AWR 采样时间(通常默认为每小时,跟AWR的设置有关系)转储到 AWR 历史表(dba_hist_sqlstat 等)中。
此外,你知道 Oracle不会像处理v$active_session_history那样,将v$sql、v$session 和其他性能动态视图的数据转储到AWR中(flushing data)。ASH中刷新数据的频率很大程度上取决于_ash_size参数值定义的大小
SQL> @pd _ash_size
Show all parameters and session values from x$ksppi/x$ksppcv...
NAME VALUE DESCRIPTION
---------- --------- -------------------------------------------------------------
_ash_size 1048618 To set the size of the in-memory Active Session History buffers
当然,它这还取决于ASH 承受的压力有多大,什么情况下刷出数据。
SQL> select
inst_id
,total_size/power(1024,2) MB
,awr_flush_emergency_count
from gv$ash_info; 2 3 4 5
INST_ID MB AWR_FLUSH_EMERGENCY_COUNT
---------- ---------- -------------------------
1 4 0
但是,通常,在现实运行的系统当中, v$active_session_history 几乎总是保留超过几个小时的数据(有时甚至是一整天),因此,Oracle 将所有标记的ASH 记录 ( is_awr_sample ) 转储到 dba_hist_active_sess_history 中,而不会有任何数据丢失。
另一方面,您不能忽视其他动态性能视图刷出数据遵循了完全不同的算法规则。因此,很可能出现这么一种情况,虽然 sql_id 以相对较小的延迟转储到 dba_hist_active_sess_history 中,但在一小时后生成AWR 快照时,相同的 sql_id的记录可能已经从v$sql中被刷出去了。这就是为什么dba_hist_active_sess_history 中存在的 sql_id 无法从AWR中获取执行计划的原因。
让我们用一个简单的模型来演示这一点:
create table t1
as
with generator as (
select --+ materialize
rownum id
from dual
connect by
level <= 10000)
select
rownum id,
trunc(dbms_random.value(1,1000)) n1,
lpad(rownum,10,'0') small_vc,
rpad('x',100) padding
from
generator v1,
generator v2
where
rownum <= 1000000;
create index t1_n1 on t1(id, n1);
create table t2
as
with generator as (
select --+ materialize
rownum id
from dual
connect by
level <= 10000)
select
rownum id,
trunc(dbms_random.value(10001,20001)) x1,
lpad(rownum,10,'0') small_vc,
rpad('x',100) padding
from
generator v1,
generator v2
where
rownum <= 1000000;
create index t2_i1 on t2(x1);
我创建了两个带有索引的表并运行了下面查询语句
select *
from t1
where id
in (select id from t2 where x1 = 17335)
order by id;
93 rows selected.
Elapsed: 00:03:05.22
但是,在执行上述查询之前,我已将优化器模式从 all_rows 更改为first_rows,以便在按 id 对结果进行排序时使用昂贵的INDEX FULL SCAN来避免 order by 操作。
当查询语句运行时,我对 ASH 和 AWR 执行了以下查询,以查看转储是如何进行的:
SELECT
sample_time
,is_awr_sample
,COUNT(1)
FROM
gv$active_session_history
WHERE
sql_id = '069t64t6ws5mx'
AND is_awr_sample = 'Y'
GROUP BY
sample_time
,is_awr_sample
order by sample_time ;
SAMPLE_TIME I COUNT(1)
----------------------------- - ----------
26-JUN-21 03.17.29.878 PM Y 1
26-JUN-21 03.17.40.117 PM Y 1
26-JUN-21 03.17.50.357 PM Y 1
26-JUN-21 03.18.00.598 PM Y 1
26-JUN-21 03.18.10.839 PM Y 1
26-JUN-21 03.18.21.141 PM Y 1
26-JUN-21 03.18.31.510 PM Y 1
26-JUN-21 03.18.41.750 PM Y 1
26-JUN-21 03.18.51.991 PM Y 1
26-JUN-21 03.19.02.229 PM Y 1
26-JUN-21 03.19.12.470 PM Y 1
26-JUN-21 03.19.22.709 PM Y 1
26-JUN-21 03.19.32.949 PM Y 1
26-JUN-21 03.19.43.188 PM Y 1
26-JUN-21 03.19.53.493 PM Y 1
8 rows selected.
SELECT
sql_id,
sample_time
FROM
dba_hist_active_sess_history
WHERE
sql_id = '069t64t6ws5mx'
ORDER BY
2;
no rows selected
SQL> select * from table(dbms_xplan.display_awr('069t64t6ws5mx'));
no rows selected;
依此类推,直到本次查询结束
SELECT
sample_time
,is_awr_sample
,COUNT(1)
FROM
gv$active_session_history
WHERE
sql_id = '069t64t6ws5mx'
AND is_awr_sample = 'Y'
GROUP BY
sample_time
,is_awr_sample
order by sample_time ;
SAMPLE_TIME I COUNT(1)
--------------------------- - ----------
26-JUN-21 03.17.29.878 PM Y 1
26-JUN-21 03.17.40.117 PM Y 1
26-JUN-21 03.17.50.357 PM Y 1
26-JUN-21 03.18.00.598 PM Y 1
26-JUN-21 03.18.10.839 PM Y 1
26-JUN-21 03.18.21.141 PM Y 1
26-JUN-21 03.18.31.510 PM Y 1
26-JUN-21 03.18.41.750 PM Y 1
26-JUN-21 03.18.51.991 PM Y 1
26-JUN-21 03.19.02.229 PM Y 1
26-JUN-21 03.19.12.470 PM Y 1
26-JUN-21 03.19.22.709 PM Y 1
26-JUN-21 03.19.32.949 PM Y 1
26-JUN-21 03.19.43.188 PM Y 1
26-JUN-21 03.19.53.493 PM Y 1
26-JUN-21 03.20.03.733 PM Y 1
26-JUN-21 03.20.14.102 PM Y 1
26-JUN-21 03.20.24.342 PM Y 1
18 rows selected.
SELECT
sql_id,
sample_time
FROM
dba_hist_active_sess_history
WHERE
sql_id = '069t64t6ws5mx'
ORDER BY
2;
SQL_ID SAMPLE_TIME
------------- -----------------------------
069t64t6ws5mx 26-JUN-21 03.17.29.878 PM
069t64t6ws5mx 26-JUN-21 03.17.40.117 PM
069t64t6ws5mx 26-JUN-21 03.17.50.357 PM
069t64t6ws5mx 26-JUN-21 03.18.00.598 PM
069t64t6ws5mx 26-JUN-21 03.18.10.839 PM
069t64t6ws5mx 26-JUN-21 03.18.21.141 PM
069t64t6ws5mx 26-JUN-21 03.18.31.510 PM
069t64t6ws5mx 26-JUN-21 03.18.41.750 PM
069t64t6ws5mx 26-JUN-21 03.18.51.991 PM
069t64t6ws5mx 26-JUN-21 03.19.02.229 PM
069t64t6ws5mx 26-JUN-21 03.19.12.470 PM
069t64t6ws5mx 26-JUN-21 03.19.22.709 PM
069t64t6ws5mx 26-JUN-21 03.19.32.949 PM
069t64t6ws5mx 26-JUN-21 03.19.43.188 PM
069t64t6ws5mx 26-JUN-21 03.19.53.493 PM
069t64t6ws5mx 26-JUN-21 03.20.03.733 PM
069t64t6ws5mx 26-JUN-21 03.20.14.102 PM
069t64t6ws5mx 26-JUN-21 03.20.24.342 PM
18 rows selected.
SQL> select * from table(dbms_xplan.display_awr('069t64t6ws5mx'));
no rows selected
可以看到,只要下一次AWR快照还没有生成,AWR中就没有对应的执行计划:
select
snap_id,
to_char(begin_interval_time, 'dd/mm/yyyy hh24:mi:ss') begin
,to_char(end_interval_time, 'dd/mm/yyyy hh24:mi:ss') end
from
dba_hist_snapshot
order by 1 desc
fetch first 5 rows only;
SNAP_ID BEGIN END
---------- ------------------- -------------------
392 26/06/2021 13:58:56 26/06/2021 15:00:07
391 26/06/2021 13:00:33 26/06/2021 13:58:56
390 26/06/2021 12:00:48 26/06/2021 13:00:33
389 26/06/2021 11:01:00 26/06/2021 12:00:48
388 26/06/2021 10:00:11 26/06/2021 11:01:00
然后我们强制生成AWR快照,以便将执行计划转储到 AWR 中
SQL> EXECUTE DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT();
PL/SQL procedure successfully completed.
select
snap_id,
to_char(begin_interval_time, 'dd/mm/yyyy hh24:mi:ss') begin
,to_char(end_interval_time, 'dd/mm/yyyy hh24:mi:ss') end
from
dba_hist_snapshot
order by 1 desc
fetch first 5 rows only;
SNAP_ID BEGIN END
---------- ------------------- -------------------
393 26/06/2021 15:00:07 26/06/2021 15:46:40
392 26/06/2021 13:58:56 26/06/2021 15:00:07
391 26/06/2021 13:00:33 26/06/2021 13:58:56
390 26/06/2021 12:00:48 26/06/2021 13:00:33
389 26/06/2021 11:01:00 26/06/2021 12:00:48
SQL> select * from table(dbms_xplan.display_awr('069t64t6ws5mx'));
SQL_ID 069t64t6ws5mx
--------------------
--------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
--------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | | | 102M(100)| |
| 1 | NESTED LOOPS SEMI | | 100 | 13100 | 102M (1)| 01:06:26 |
| 2 | TABLE ACCESS BY INDEX ROWID| T1 | 1000K| 115M| 20332 (1)| 00:00:01 |
| 3 | INDEX FULL SCAN | T1_N1 | 1000K| | 2779 (1)| 00:00:01 |
| 4 | TABLE ACCESS BY INDEX ROWID| T2 | 1 | 10 | 102 (0)| 00:00:01 |
| 5 | INDEX RANGE SCAN | T2_I1 | 100 | | 2 (0)| 00:00:01 |
--------------------------------------------------------------------------------------
如果我重复相同的实验,但这一次,我将在生成新的AWR快照之前将sql_id刷出share pool,那么您将看到,不会有对应的执行计划转储到 AWR 中
SELECT *
from t1
where id
in (select id from t2 where x1 = 17335)
ORDER BY id;
SELECT
sample_time
,is_awr_sample
,COUNT(1)
FROM
gv$active_session_history
WHERE
sql_id = '65gw9y7cw56k1'
AND is_awr_sample = 'Y'
GROUP BY
sample_time
,is_awr_sample
order by sample_time ;
SAMPLE_TIME I COUNT(1)
------------------------------ - ----------
27-JUN-21 09.01.47.733 AM Y 1
27-JUN-21 09.01.57.973 AM Y 1
27-JUN-21 09.02.08.277 AM Y 1
27-JUN-21 09.02.18.518 AM Y 1
27-JUN-21 09.02.28.757 AM Y 1
27-JUN-21 09.02.39.026 AM Y 1
27-JUN-21 09.02.49.301 AM Y 1
27-JUN-21 09.02.59.609 AM Y 1
8 rows selected.
SELECT
sql_id,
sample_time
FROM
dba_hist_active_sess_history
WHERE
sql_id = '65gw9y7cw56k1'
ORDER BY 2;
no rows selected ----> still no rows dumped into AWR
SELECT
sample_time
,is_awr_sample
,COUNT(1)
FROM
gv$active_session_history
WHERE
sql_id = '65gw9y7cw56k1'
AND is_awr_sample = 'Y'
GROUP BY
sample_time
,is_awr_sample
order by sample_time;
SAMPLE_TIME I COUNT(1)
--------------------------- - ----------
27-JUN-21 09.01.47.733 AM Y 1
27-JUN-21 09.01.57.973 AM Y 1
27-JUN-21 09.02.08.277 AM Y 1
27-JUN-21 09.02.18.518 AM Y 1
27-JUN-21 09.02.28.757 AM Y 1
27-JUN-21 09.02.39.026 AM Y 1
27-JUN-21 09.02.49.301 AM Y 1
27-JUN-21 09.02.59.609 AM Y 1
27-JUN-21 09.03.09.846 AM Y 1
27-JUN-21 09.03.20.085 AM Y 1
27-JUN-21 09.03.30.454 AM Y 1
27-JUN-21 09.03.40.693 AM Y 1
27-JUN-21 09.03.50.997 AM Y 1
27-JUN-21 09.04.01.365 AM Y 1
27-JUN-21 09.04.11.606 AM Y 1
15 rows selected.
SELECT
sql_id,
sample_time
FROM
dba_hist_active_sess_history
WHERE
sql_id = '65gw9y7cw56k1'
ORDER BY 2;
no rows selected ----> still no rows dumped into AWR
SELECT
sample_time
,is_awr_sample
,COUNT(1)
FROM
gv$active_session_history
WHERE
sql_id = '65gw9y7cw56k1'
AND is_awr_sample = 'Y'
GROUP BY
sample_time
,is_awr_sample
order by sample_time ;
SAMPLE_TIME I COUNT(1)
------------------------------ - ----------
27-JUN-21 09.01.47.733 AM Y 1
27-JUN-21 09.01.57.973 AM Y 1
27-JUN-21 09.02.08.277 AM Y 1
27-JUN-21 09.02.18.518 AM Y 1
27-JUN-21 09.02.28.757 AM Y 1
27-JUN-21 09.02.39.026 AM Y 1
27-JUN-21 09.02.49.301 AM Y 1
27-JUN-21 09.02.59.609 AM Y 1
27-JUN-21 09.03.09.846 AM Y 1
27-JUN-21 09.03.20.085 AM Y 1
27-JUN-21 09.03.30.454 AM Y 1
27-JUN-21 09.03.40.693 AM Y 1
27-JUN-21 09.03.50.997 AM Y 1
27-JUN-21 09.04.01.365 AM Y 1
27-JUN-21 09.04.11.606 AM Y 1
27-JUN-21 09.04.21.846 AM Y 1
27-JUN-21 09.04.32.086 AM Y 1
27-JUN-21 09.04.42.326 AM Y 1
18 rows selected.
SELECT
sql_id,
sample_time
FROM
dba_hist_active_sess_history
WHERE
sql_id = '65gw9y7cw56k1'
ORDER BY 2;
SQL_ID SAMPLE_TIME
------------- ---------------------------
65gw9y7cw56k1 27-JUN-21 09.01.47.733 AM
65gw9y7cw56k1 27-JUN-21 09.01.57.973 AM
65gw9y7cw56k1 27-JUN-21 09.02.08.277 AM
65gw9y7cw56k1 27-JUN-21 09.02.18.518 AM
65gw9y7cw56k1 27-JUN-21 09.02.28.757 AM
65gw9y7cw56k1 27-JUN-21 09.02.39.026 AM
65gw9y7cw56k1 27-JUN-21 09.02.49.301 AM
65gw9y7cw56k1 27-JUN-21 09.02.59.609 AM
65gw9y7cw56k1 27-JUN-21 09.03.09.846 AM
65gw9y7cw56k1 27-JUN-21 09.03.20.085 AM
65gw9y7cw56k1 27-JUN-21 09.03.30.454 AM
65gw9y7cw56k1 27-JUN-21 09.03.40.693 AM
65gw9y7cw56k1 27-JUN-21 09.03.50.997 AM
65gw9y7cw56k1 27-JUN-21 09.04.01.365 AM
65gw9y7cw56k1 27-JUN-21 09.04.11.606 AM
65gw9y7cw56k1 27-JUN-21 09.04.21.846 AM
65gw9y7cw56k1 27-JUN-21 09.04.32.086 AM
65gw9y7cw56k1 27-JUN-21 09.04.42.326 AM
18 rows selected. ----> all ASH rows dumped into AWR
select * from table(dbms_xplan.display_awr('65gw9y7cw56k1'));
no rows selected ----> but there is no execution plan into AWR
正如您所看到的,AWR 中还没有执行计划。通常,如上所示,它将在 AWR 采样时间(下一小时)转储。除非这个 sql_id 被从内存中刷出去了:
SQL> select * from table(dbms_xplan.display_cursor('65gw9y7cw56k1'));
--------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |
--------------------------------------------------------------
| 0 | SELECT STATEMENT | | | |
| 1 | NESTED LOOPS SEMI | | 100 | 13100 |
| 2 | TABLE ACCESS BY INDEX ROWID| T1 | 1000K| 115M|
| 3 | INDEX FULL SCAN | T1_N1 | 1000K| |
|* 4 | TABLE ACCESS BY INDEX ROWID| T2 | 1 | 10 |
|* 5 | INDEX RANGE SCAN | T2_I1 | 100 | |
--------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
4 - filter("ID"="ID")
5 - access("X1"=17335)
SELECT
p.sql_id
,p.plan_hash_value
,p.child_number
,p.last_load_time
,p.executions
FROM
gv$sql p
where
p.sql_id = '65gw9y7cw56k1'
and
p.is_shareable ='Y';
SQL_ID PLAN_HASH_VALUE CHILD_NUMBER LAST_LOAD_TIME EXECUTIONS
------------- --------------- ------------ ------------------- ----------
65gw9y7cw56k1 1518369540 0 2021-06-27/09:01:40 1
select address, hash_value from v$sqlarea where sql_id='65gw9y7cw56k1';
ADDRESS HASH_VALUE
---------------- ----------
000000006754FB80 3653409345
SQL> exec dbms_shared_pool.purge ('000000006754FB80, 3653409345', 'C');
PL/SQL procedure successfully completed.
SELECT
p.sql_id
,p.plan_hash_value
,p.child_number
,p.last_load_time
,p.executions
FROM
gv$sql p
where
p.sql_id = '65gw9y7cw56k1';
no rows selected ----> cursor is now purged from memory
现在我已经从内存中刷出了对应的SQL_ID,下一个 AWR 快照将无法转储其执行计划(和 cie),如下所示:
select
snap_id,
to_char(begin_interval_time, 'dd/mm/yyyy hh24:mi:ss') begin
,to_char(end_interval_time, 'dd/mm/yyyy hh24:mi:ss') end
from
dba_hist_snapshot
order by 1 desc
fetch first 5 rows only;
SNAP_ID BEGIN END
---------- ------------------- -------------------
398 27/06/2021 08:02:48 27/06/2021 09:00:32
397 26/06/2021 19:00:18 27/06/2021 08:02:48
396 26/06/2021 18:00:31 26/06/2021 19:00:18
395 26/06/2021 17:00:43 26/06/2021 18:00:31
394 26/06/2021 15:46:40 26/06/2021 17:00:43
SQL> EXECUTE DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT();
PL/SQL procedure successfully completed.
select
snap_id,
to_char(begin_interval_time, 'dd/mm/yyyy hh24:mi:ss') begin
,to_char(end_interval_time, 'dd/mm/yyyy hh24:mi:ss') end
from
dba_hist_snapshot
order by 1 desc
fetch first 5 rows only;
SNAP_ID BEGIN END
---------- ------------------- -------------------
399 27/06/2021 09:00:32 27/06/2021 09:17:52
398 27/06/2021 08:02:48 27/06/2021 09:00:32
397 26/06/2021 19:00:18 27/06/2021 08:02:48
396 26/06/2021 18:00:31 26/06/2021 19:00:18
395 26/06/2021 17:00:43 26/06/2021 18:00:31
SQL> select * from table(dbms_xplan.display_awr('65gw9y7cw56k1'));
no rows selected
SQL> select count(1) from dba_hist_active_sess_history where sql_id = '65gw9y7cw56k1';
COUNT(1)
----------
18
总之,由于性能动态视图中收集的信息会在AWR采样时转储到 AWR 中,因此当您找不到游标的执行计划时,请不要感到惊讶,尽管该游标存在于 dba_hist_active_sess_history 中。这可能是因为该游标在 AWR 采样时间之前已从内存中清除。
参考资料
1: https://hourim.wordpress.com/2021/06/27/why-my-execution-plan-is-not-in-awr
![](https://images.cnblogs.com/cnblogs_com/kerrycode/1913302/o_240731062102_kerrycode.png)