ip netns
虚拟化网络都是基于netns实现，不管是昨日的openstack，还是今日的docker。
ip netns
ip-netns - process network namespace management
A network namespace is logically another copy of the network stack, with it's own routes, firewall rules, and network devices.
网络名称空间是网络栈的一个逻辑副本，有自己的路由、防火墙规则、和网络设备。
By convention a named network namespace is an object at /var/run/netns/NAME that can be opened. The file descriptor resulting from opening /var/run/netns/NAME refers to the specified network namespace. Holding that file descriptor open keeps the network namespace alive.
通常网络名称空间是一个位于/var/run/netns/NAME的可打开对象，保持这个文件可打开可以保持网络名称空间存活。
The convention for network namespace aware applications is to look for global network configuration files first in /etc/netns/NAME/ then in /etc/.
For example, if you want a different version of /etc/resolv.conf for a network namespace used to isolate your vpn you would name it /etc/netns/myvpn/resolv.conf.
用法
ip [ OPTIONS ] netns { COMMAND | help }
ip netns list - show all of the named network namespaces 列出所有名称空间
ip netns add NETNSNAME - create a new named network namespace 创建一个新的名称空间
ip netns delete NETNSNAME - delete the name of a network namespace 删除一个名称空间
ip netns exec NETNSNAME cmd ... - Run cmd in the named network namespace 在网络名称空间中执行系统命令
ip [-all] netns exec [ NAME ] cmd ... - Run cmd in the named network namespace.
If -all option was specified then cmd will be executed synchronously on the each named network namespace.
ip link
用到netns，就不得不说到ip-link
ip-link - network device configuration
用法
ip [ OPTIONS ] link { COMMAND | help }
显示设备属性
ip link show - display device attributes
dev NAME：specifies the network device to show. (default) 如果不指定设备，则显示所有设备信息
up：only display running interfaces. 只显示启动的接口
添加虚拟设备
ip link add - add virtual link
link DEVICE：specifies the physical device to act operate on. 指定在哪个物理设备上操作
NAME：specifies the name of the new virtual device. 指定新虚拟设备的名称
TYPE：specifies the type of the new device. 指定新设备的类型
Link types:
vlan - 802.1q tagged virtual LAN interface
veth - Virtual ethernet interface 虚拟网络接口（一对）
vcan - Virtual Local CAN interface
dummy - Dummy network interface
ifb - Intermediate Functional Block device
macvlan - virtual interface base on link layer address (MAC)
can - Controller Area Network interface
bridge - Ethernet Bridge device 网桥设备
删除虚拟设备
ip link delete - delete virtual link
DEVICE：specifies the virtual device to act operate on.
TYPE：specifies the type of the device.
dev DEVICE：specifies the physical device to act operate on.
设置设备属性
ip link set - change device attributes
dev DEVICE：specifies network device to operate on.
up and down：change the state of the device to UP or DOWN. 启动或关闭网卡
multicast on or multicast off：change the MULTICAST flag on the device. 启用或禁用组播
name NAME：change the name of the device. 修改网卡名称。需要先donw掉网卡，不然会提示busy。
This operation is not recommended if the device is running or has some addresses already configured.
alias NAME：give the device a symbolic name for easy reference. 为网卡设置别名
mtu NUMBER：change the MTU of the device. 设置MTU大小，默认为1500
netns NETNSNAME：move the device to the network namespace associated with name NETNSNAME. 将接口移动到指定的网络名称空间
这里单独说一下veth设备
veth设备是成对出现的，一端连接的是内核协议栈，一端彼此相连。一个设备收到协议栈的数据，会将数据发送另一个设备上去。
大概结构如下：
+----------------------------------------------------------------+
| |
| +------------------------------------------------+ |
| | Newwork Protocol Stack | |
| +------------------------------------------------+ |
| ↑ ↑ ↑ |
|..............|...............|...............|.................|
| ↓ ↓ ↓ |
| +----------+ +-----------+ +-----------+ |
| | eth0 | | veth0 | | veth1 | |
| +----------+ +-----------+ +-----------+ |
|192.168.1.11 ↑ ↑ ↑ |
| | +---------------+ |
| | 192.168.2.11 192.168.2.1 |
+--------------|-------------------------------------------------+
↓
Physical Network
示例
创建一对虚拟网卡，新建的网卡默认都是关闭的，名称空间里的回环网卡lo默认也是关闭的。
# ip link add kk type veth peer name vkk
# ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.251.53.190 netmask 255.255.248.0 broadcast 10.251.55.255
ether 00:16:3e:00:3c:24 txqueuelen 1000 (Ethernet)
RX packets 516917 bytes 522231637 (498.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 410017 bytes 29372384 (28.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
kk: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 32:24:c6:46:81:ac txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 37561 bytes 3506524 (3.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 37561 bytes 3506524 (3.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vkk: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 92:92:2c:df:be:bd txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
创建一个名称空间
# ip netns add test
# ip netns list
将虚拟网卡vkk移动到名称空间，这时vkk就查看不到了
# ip link set vkk netns test
# ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.251.53.190 netmask 255.255.248.0 broadcast 10.251.55.255
ether 00:16:3e:00:3c:24 txqueuelen 1000 (Ethernet)
RX packets 516917 bytes 522231637 (498.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 410017 bytes 29372384 (28.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
kk: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 32:24:c6:46:81:ac txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 37561 bytes 3506524 (3.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 37561 bytes 3506524 (3.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
进入名称空间，发现刚才的虚拟网卡已经在名称空间里面了。
# ip netns exec test bash
# ifconfig -a
lo: flags=8<LOOPBACK> mtu 65536
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vkk: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 92:92:2c:df:be:bd txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
另外，要使名称空间能和本地和外部通信，需要使用网桥，这里不细说了。
