RocketMq总结(四) -- 消费者拉取消息

一 ProcessQueue

　　ProcessQueue 是 MessageQueue 在消费端的重现、快照。 PullMessageService 从消息服务器默认每次拉取 32 条消息，按消息的队列偏移 顺序存放在 ProcessQueue 中，PullMessageService 然后将消息提交到消费者消费线程池，消息成功消费后 ProcessQueue中移除。

private final TreeMap<Long, MessageExt> msgTreeMap = new TreeMap<Long, MessageExt>();

  消息存储容器 键为消息在 onsumeQueue 中的偏移 MessageExt ：消息实体

private final TreeMap<Long, MessageExt> consumingMsgOrderlyTreeMap = new TreeMap<Long, MessageExt>();

  消息临时存储容器， 为消息在 ConsumeQueue 中的偏移量， MessageExt 为消息实体，该结构用于处理顺序消息，消息消费线程从 ProcessQueue msgTreeMap 中取出消息前，先将消息临时存储在 consumingMsgOrderlyTreeMap

private final ReadWriteLock lockTreeMap = new ReentrantReadWriteLock();

  读写锁，控制多线程并发修改 msgTreeMap consumingMsgOrderlyTreeMap

private final AtomicLong msgCount = new AtomicLong();

　　ProcessQueue 中总消息数

private volatile long queueOffsetMax = 0L;
最大的偏移量
private volatile boolean dropped = false;//该队列是否被丢弃
private volatile long lastPullTimestamp = System.currentTimeMillis();//上次的拉取时间戳
private volatile long lastConsumeTimestamp = System.currentTimeMillis();//上次的消费时间戳

二  DefaultMQPushConsumerImpl#pullMessage

　　拉取消息的核心逻辑在网络通信层

try {
            this.pullAPIWrapper.pullKernelImpl(
                pullRequest.getMessageQueue(),
                subExpression,
                subscriptionData.getExpressionType(),
                subscriptionData.getSubVersion(),
                pullRequest.getNextOffset(),
                this.defaultMQPushConsumer.getPullBatchSize(),
                sysFlag,
                commitOffsetValue,
                BROKER_SUSPEND_MAX_TIME_MILLIS,
                CONSUMER_TIMEOUT_MILLIS_WHEN_SUSPEND,
                CommunicationMode.ASYNC,
                pullCallback
            );

　　pullAPIWrapper#pullKernelImpl

FindBrokerResult findBrokerResult =
            this.mQClientFactory.findBrokerAddressInSubscribe(mq.getBrokerName(),
                this.recalculatePullFromWhichNode(mq), false);

　　根据 brokerName BrokerId从MQClientlnstance 中获取 Broker 地址，在整个RocketMQBroker 的部署结构中，相同名称的 Broker 构成主从结构，其 BrokerId 会不

样，在每次拉取消息后，会给出一个建议，下次拉取从主节点还是从节点拉取。

public class FindBrokerResult {
    private final String brokerAddr;
    private final boolean slave;
    private final int brokerVersion;

　　最终是通过netty的Channel进行发送

public RemotingCommand invokeSyncImpl(final Channel channel, final RemotingCommand request,
        final long timeoutMillis)
        throws InterruptedException, RemotingSendRequestException, RemotingTimeoutException {
        final int opaque = request.getOpaque();

        try {
            final ResponseFuture responseFuture = new ResponseFuture(channel, opaque, timeoutMillis, null, null);
            this.responseTable.put(opaque, responseFuture);
            final SocketAddress addr = channel.remoteAddress();
            channel.writeAndFlush(request).addListener(new ChannelFutureListener() {
                @Override
                public void operationComplete(ChannelFuture f) throws Exception {
                    if (f.isSuccess()) {
                        responseFuture.setSendRequestOK(true);
                        return;
                    } else {
                        responseFuture.setSendRequestOK(false);
                    }

                    responseTable.remove(opaque);
                    responseFuture.setCause(f.cause());
                    responseFuture.putResponse(null);
                    log.warn("send a request command to channel <" + addr + "> failed.");
                }
            });

            RemotingCommand responseCommand = responseFuture.waitResponse(timeoutMillis);
            if (null == responseCommand) {
                if (responseFuture.isSendRequestOK()) {
                    throw new RemotingTimeoutException(RemotingHelper.parseSocketAddressAddr(addr), timeoutMillis,
                        responseFuture.getCause());
                } else {
                    throw new RemotingSendRequestException(RemotingHelper.parseSocketAddressAddr(addr), responseFuture.getCause());
                }
            }

            return responseCommand;
        } finally {
            this.responseTable.remove(opaque);
        }
    }

　　2 处理返回的消息

　　其实看懂了很简单，就是Netty客户端的常见写法

class NettyClientHandler extends SimpleChannelInboundHandler<RemotingCommand> {

        @Override
        protected void channelRead0(ChannelHandlerContext ctx, RemotingCommand msg) throws Exception {
            processMessageReceived(ctx, msg);
        }
    }

　　

Bootstrap handler = this.bootstrap.group(this.eventLoopGroupWorker).channel(NioSocketChannel.class)
            .option(ChannelOption.TCP_NODELAY, true)
            .option(ChannelOption.SO_KEEPALIVE, false)
            .option(ChannelOption.CONNECT_TIMEOUT_MILLIS, nettyClientConfig.getConnectTimeoutMillis())
            .option(ChannelOption.SO_SNDBUF, nettyClientConfig.getClientSocketSndBufSize())
            .option(ChannelOption.SO_RCVBUF, nettyClientConfig.getClientSocketRcvBufSize())
            .handler(new ChannelInitializer<SocketChannel>() {
                @Override
                public void initChannel(SocketChannel ch) throws Exception {
                    ChannelPipeline pipeline = ch.pipeline();
                    if (nettyClientConfig.isUseTLS()) {
                        if (null != sslContext) {
                            pipeline.addFirst(defaultEventExecutorGroup, "sslHandler", sslContext.newHandler(ch.alloc()));
                            log.info("Prepend SSL handler");
                        } else {
                            log.warn("Connections are insecure as SSLContext is null!");
                        }
                    }
                    pipeline.addLast(
                        defaultEventExecutorGroup,
                        new NettyEncoder(),
                        new NettyDecoder(),
                        new IdleStateHandler(0, 0, nettyClientConfig.getClientChannelMaxIdleTimeSeconds()),
                        new NettyConnectManageHandler(),
                        new NettyClientHandler());
                }
            });

　　收到消息就是解码的过程，这部分不详细展开了。

　　处理拉取到的消息逻辑在发送前的PullCallBack里，主要的代码逻辑是

boolean dispatchToConsume = processQueue.putMessage(pullResult.getMsgFoundList());//先把消息存到ProcessQueue里
                                DefaultMQPushConsumerImpl.this.consumeMessageService.submitConsumeRequest(
                                    pullResult.getMsgFoundList(),
                                    processQueue,
                                    pullRequest.getMessageQueue(),
                                    dispatchToConsume);//把消息包到一个ConsumeRequest里对消费线程池发送消费Request

                                if (DefaultMQPushConsumerImpl.this.defaultMQPushConsumer.getPullInterval() > 0) {
                                    DefaultMQPushConsumerImpl.this.executePullRequestLater(pullRequest,
                                        DefaultMQPushConsumerImpl.this.defaultMQPushConsumer.getPullInterval());
                                } else {
                                    DefaultMQPushConsumerImpl.this.executePullRequestImmediately(pullRequest);//再次把拉取请求放到拉取线程池队列里
                                }

总结下就是三件事

1 把消息先缓存在ProcessQueue里

2 把ProcessQueue包成一个ConsumeRequest，对线程池提交，异步执行

3 把下一次的拉取请求放入拉取队列

 

三 一次拉取拉不到的情况

=======2021-08-30更新========

　　Rocketmq默认开启长轮询模式，如果某一次拉取消息拉不到，则每5s检查一次是否有新的消息到来。最长时间15s，如果到了15s则返回给客户端空结果。

　　同时，由于5s一次间隔较长，Rocketmq还有一种机制保证长轮询。那就是每次写commitLog就回去PullRequestHoldService检查下该消息是否有挂起的拉取任务在等待。如果有，构造请求进行拉取

　　PullRequestHoldService # run()

public void run() {
        log.info("{} service started", this.getServiceName());
        while (!this.isStopped()) {
            try {
                if (this.brokerController.getBrokerConfig().isLongPollingEnable()) {
                    this.waitForRunning(5 * 1000);//如果开启长轮询，等待5s
                } else {
                    this.waitForRunning(this.brokerController.getBrokerConfig().getShortPollingTimeMills());//不开启长轮询，默认是1s
                }

                long beginLockTimestamp = this.systemClock.now();
                this.checkHoldRequest();
                long costTime = this.systemClock.now() - beginLockTimestamp;
                if (costTime > 5 * 1000) {
                    log.info("[NOTIFYME] check hold request cost {} ms.", costTime);
                }
            } catch (Throwable e) {
                log.warn(this.getServiceName() + " service has exception. ", e);
            }
        }

        log.info("{} service end", this.getServiceName());
    }

private void checkHoldRequest() {
        for (String key : this.pullRequestTable.keySet()) {//pullRequestTable保存的都是挂起的请求
            String[] kArray = key.split(TOPIC_QUEUEID_SEPARATOR);
            if (2 == kArray.length) {
                String topic = kArray[0];
                int queueId = Integer.parseInt(kArray[1]);
                final long offset = this.brokerController.getMessageStore().getMaxOffsetInQueue(topic, queueId);
                try {
                    this.notifyMessageArriving(topic, queueId, offset);
                } catch (Throwable e) {
                    log.error("check hold request failed. topic={}, queueId={}", topic, queueId, e);
                }
            }
        }
    }

public void notifyMessageArriving(final String topic, final int queueId, final long maxOffset, final Long tagsCode,
        long msgStoreTime, byte[] filterBitMap, Map<String, String> properties) {
        String key = this.buildKey(topic, queueId);
        ManyPullRequest mpr = this.pullRequestTable.get(key);
        if (mpr != null) {
            List<PullRequest> requestList = mpr.cloneListAndClear();
            if (requestList != null) {
                List<PullRequest> replayList = new ArrayList<PullRequest>();

                for (PullRequest request : requestList) {
                    long newestOffset = maxOffset;
                    if (newestOffset <= request.getPullFromThisOffset()) {
                        newestOffset = this.brokerController.getMessageStore().getMaxOffsetInQueue(topic, queueId);
                    }

                    if (newestOffset > request.getPullFromThisOffset()) {
                        boolean match = request.getMessageFilter().isMatchedByConsumeQueue(tagsCode,
                            new ConsumeQueueExt.CqExtUnit(tagsCode, msgStoreTime, filterBitMap));
                        // match by bit map, need eval again when properties is not null.
                        if (match && properties != null) {
                            match = request.getMessageFilter().isMatchedByCommitLog(null, properties);
                        }

                        if (match) {//就是看现在的offset是不是比要拉取的offset大，如果大直接进行拉取
                            try {
                                this.brokerController.getPullMessageProcessor().executeRequestWhenWakeup(request.getClientChannel(),
                                    request.getRequestCommand());
                            } catch (Throwable e) {
                                log.error("execute request when wakeup failed.", e);
                            }
                            continue;
                        }
                    }

 

　　下面再看下在 DefaultMessageStore中的逻辑

 public void run() {
            DefaultMessageStore.log.info(this.getServiceName() + " service started");

            while (!this.isStopped()) {
                try {
                    Thread.sleep(1);
                    this.doReput();
                } catch (Exception e) {
                    DefaultMessageStore.log.warn(this.getServiceName() + " service has exception. ", e);
                }
            }

            DefaultMessageStore.log.info(this.getServiceName() + " service end");
        }

private void doReput() {
            if (this.reputFromOffset < DefaultMessageStore.this.commitLog.getMinOffset()) {
                log.warn("The reputFromOffset={} is smaller than minPyOffset={}, this usually indicate that the dispatch behind too much and the commitlog has expired.",
                    this.reputFromOffset, DefaultMessageStore.this.commitLog.getMinOffset());
                this.reputFromOffset = DefaultMessageStore.this.commitLog.getMinOffset();
            }
            for (boolean doNext = true; this.isCommitLogAvailable() && doNext; ) {

                if (DefaultMessageStore.this.getMessageStoreConfig().isDuplicationEnable()
                    && this.reputFromOffset >= DefaultMessageStore.this.getConfirmOffset()) {
                    break;
                }

                SelectMappedBufferResult result = DefaultMessageStore.this.commitLog.getData(reputFromOffset);
                if (result != null) {
                    try {
                        this.reputFromOffset = result.getStartOffset();

                        for (int readSize = 0; readSize < result.getSize() && doNext; ) {
                            DispatchRequest dispatchRequest =
                                DefaultMessageStore.this.commitLog.checkMessageAndReturnSize(result.getByteBuffer(), false, false);
                            int size = dispatchRequest.getBufferSize() == -1 ? dispatchRequest.getMsgSize() : dispatchRequest.getBufferSize();

                            if (dispatchRequest.isSuccess()) {
                                if (size > 0) {
                                    DefaultMessageStore.this.doDispatch(dispatchRequest);

                                    if (BrokerRole.SLAVE != DefaultMessageStore.this.getMessageStoreConfig().getBrokerRole()
                                        && DefaultMessageStore.this.brokerConfig.isLongPollingEnable()) {
                                        DefaultMessageStore.this.messageArrivingListener.arriving(dispatchRequest.getTopic(),
                                            dispatchRequest.getQueueId(), dispatchRequest.getConsumeQueueOffset() + 1,
                                            dispatchRequest.getTagsCode(), dispatchRequest.getStoreTimestamp(),
                                            dispatchRequest.getBitMap(), dispatchRequest.getPropertiesMap());
                                    }

　　如果写入的size不为0，就调用messageArrivingListener进行通知

　　NotifyMessageArrivingListener # arriving

public void arriving(String topic, int queueId, long logicOffset, long tagsCode,
        long msgStoreTime, byte[] filterBitMap, Map<String, String> properties) {
        this.pullRequestHoldService.notifyMessageArriving(topic, queueId, logicOffset, tagsCode,
            msgStoreTime, filterBitMap, properties);
    }

　　看得到调用的还是 pullRequestHoldService.notifyMessageArriving