Redis高可用方案----Redis主从+Sentinel+Haproxy

安装环境

这里使用三台服务器，每台服务器上开启一个redis-server和redis-sentinel服务，redis-server端口为6379，redis-sentinel的端口为26379。

redis-server说明

192.168.10.3:6379 主

192.168.10.4:6379 从

192.168.10.5:6379 从

redis-sentinel说明

192.168.10.3:26379

192.168.10.4:26379

192.168.10.5:26379

目录规划：

配置文件目录： /data/apps/conf/redis

数据目录： /data/apps/data/redis_6379

日志目录： /data/apps/log/redis

pid文件目录： /data/apps/var/redis

sentinel数据目录： /data/apps/var/sentinel

安装Redis

操作主机：192.168.10.3 192.168.10.4 192.168.10.5

1、下载redis安装包

下载完毕后使用tar命令解压到当前目录。

[root@localhost ~]# wget http://download.redis.io/releases/redis-3.2.8.tar.gz
[root@localhost ~]# tar zxvf redis-3.2.8.tar.gz

2、编译redis

进入安装目录下，执行make命令，编译成功后会显示下面内容。

编译后在目录下生成一个src目录，里面会有编译好的执行文件

[root@localhost ~]# cd redis-3.2.8
[root@localhost redis-3.2.8]# make
[root@localhost redis-3.2.8]# cd src && make all
make[1]: Entering directory `/home/redis/redis-3.2.8/src'  Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory `/home/redis/redis-3.2.8/src'

3、安装redis

Redis的默认安装路径是 /usr/local 目录下，进入src目录下，使用vi编辑Makefile文件，在文件中找到“PRIFIX？=/usr/local”，可以修改为你需要安装的目录，这里使用局对路径。

然后执行make install命令进行安装，安装完毕后会在安装目录下生成一些执行文件。

[root@localhost src]# make install
Hint: It's a good idea to run 'make test' ;)
    INSTALL install
    INSTALL install
    INSTALL install
    INSTALL install
    INSTALL install

[root@localhost ~]# cd /usr/local/bin/
[redis@localhost bin]$ ls
dump.rdb         redis-check-aof  redis-cli       redis-server
redis-benchmark  redis-check-rdb  redis-sentinel

4、编辑环境变量

[root@localhost ~]# vim /etc/profile.d/redis.sh 
export REDIS_HOME=/usr/local 
export PATH=${REDIS_HOME}:bin:${PATH}

[root@localhost ~]# source /etc/profile

5、修改配置文件

vim /data/apps/conf/redis/redis_6379.conf
bind 0.0.0.0
protected-mode no
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize yes
supervised no
pidfile "/data/apps/var/redis/redis_6379.pid"
loglevel notice
logfile "/data/apps/log/redis/redis_6379.log"
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename "dump.rdb"
dir "/data/apps/data/redis_6379"
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes
# Generated by CONFIG REWRITE

6、配置主从复制

192.168.10.3为master，其他两个为slave，只需修改从库的配置文件

操作主机：192.168.10.4、192.168.10.5

[root@localhost ~]# echo 'slaveof 192.168.10.3 6379' >>/data/apps/conf/redis_6379.conf

7 、启动redis-server

操作主机：所有主机

[root@localhost ~]# redis-server /data/apps/conf/redis/redis_6379.conf

8、检查

[root@localhost ~]# redis-cli -h 192.168.10.3 -p 6379
127.0.0.1:6379> info

# Replication
role:master
connected_slaves:2
slave0:ip=192.168.10.5,port=6379,state=online,offset=14874,lag=1
slave1:ip=192.168.10.4,port=6379,state=online,offset=15160,lag=1
master_repl_offset:15303
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:2
repl_backlog_histlen:15302

# 出现上面的结果说明主从复制成功

部署redis-sentinel

操作主机：所有主机，每个主机的配置文件相同

1、配置文件

[root@localhost ~]# vim /data/apps/config/redis/redis-sentinel-26379.conf
port 26379
daemonize yes
protected-mode no
dir "/data/apps/var/sentinel"
pidfile "/data/apps/var/redis/redis-sentinel.pid"
logfile "/data/apps/log/redis/redis-sentinel.log"
sentinel monitor redis_master 192.168.10.3 6379 2
sentinel down-after-milliseconds redis_master 9000
sentinel failover-timeout redis_master 9000

2、启动sentinel

[root@localhost ~]# redis-sentinel /data/apps/conf/redis/redis-sentinel-26379.conf

3、检查

[root@localhost ~]# ss -lnt|grep 26379

[root@localhost ~]# redis-cli -p 26379
127.0.0.1:26379> info

# Sentinel
sentinel_masters:1
sentinel_tilt:0
sentinel_running_scripts:0
sentinel_scripts_queue_length:0
sentinel_simulate_failure_flags:0
master0:name=redis_master,status=ok,address=192.168.10.3:6379,slaves=2,sentinels=3

# 出现上面的情况说明配置成功

部署Haproxy

1、安装Haproxy

#下载
wget http://fossies.org/linux/misc/haproxy-1.8.12.tar.gz
#解压
tar -zxvf haproxy-1.8.12.tar.gz
cd haproxy-1.8.12
#安装
make TARGET=linux2628 ARCH=x86_64 PREFIX=/usr/local/haproxy
make install PREFIX=/usr/local/haproxy
#参数说明
TARGET=linux26 #内核版本，使用uname -r查看内核，如：2.6.18-371.el5，此时该参数就为linux26；kernel 大于2.6.28的用：TARGET=linux2628
ARCH=x86_64 #系统位数
PREFIX=/usr/local/haprpxy #/usr/local/haprpxy为haprpxy安装路径

2、配置Haproxy

vim /usr/local/haproxy/haproxy.cfg
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    # to have these messages end up in /var/log/haproxy.log you will
    # need to:
    #
    # 1) configure syslog to accept network log events.  This is done
    #    by adding the '-r' option to the SYSLOGD_OPTIONS in
    #    /etc/sysconfig/syslog
    #
    # 2) configure local2 events to go to the /var/log/haproxy.log
    #   file. A line like the following can be added to
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2
    chroot      /usr/local/haproxy
    pidfile     /usr/local/haproxy/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon
    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats
#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    log global
    mode tcp
    retries 3
    option redispatch
    maxconn 20000
    timeout connect 600s
    timeout client 600s
    timeout server 600s
listen stats 
    bind 0.0.0.0:18888     
    mode http
    stats uri /haproxy-status  
    stats auth admin:admin     
    stats hide-version         
    stats refresh 30s   
frontend redis16379
    bind :16379
    default_backend redis_16379_backend
backend redis_16379_backend
    option tcp-check
    tcp-check send PING\r\n  
    tcp-check expect string +PONG
    tcp-check send INFO\ REPLICATION\r\n
    tcp-check expect string role:master 
    tcp-check send INFO\ REPLICATION\r\n
    tcp-check expect rstring connected_slaves:[1-9] 
    tcp-check send QUIT\r\n
    tcp-check expect string +OK
    server redis1_6379 192.168.10.3:6379 check inter 1s
    server redis2_6379 192.168.10.4:6379 check inter 1s
    server redis3_6379 192.168.10.5:6379 check inter 1s

3、检查

[root@localhost ~]# redis-cli -p 16379 set a 2
OK
[root@localhost ~]# redis-cli -p 16379 set get a
OK

总结

上面的内容可以解决redis高可用的问题，但是Haproxy还是单点。如果服务器是物理机，Haproxy可以通过Keepalived解决单点问题，实现高可用；但是服务器是ECS的情况下不能使用Keepalived。

posted @ 2018-07-17 17:34 大脸猫爱吃鱼！！！阅读(2352) 评论(0) 编辑收藏举报

刷新页面返回顶部

大脸猫爱吃鱼！！！

Redis高可用方案----Redis主从+Sentinel+Haproxy

公告