ES集群检查常用命令
一、集群检查常用命令
- 查询集群状态命令：
curl -XGET "http://ip:port/_cluster/health?pretty"
- 查询Es全局状态：
curl -XGET "http://ip:port/_cluster/stats?pretty"
- 查询集群设置
curl -XGET "http://ip:port/_cluster/settings?pretty"
- 查看集群文档总数
curl -XGET "http://ip:port/_cat/count?v"
- 查看集群文档总数
curl -XGET "http://ip:port/_cat/count?v"
- 查看集群别名组
curl -XGET "http://ip:port/_cat/aliases"
6.查看当前集群索引分片信息
curl -XGET "http://ip:port/_cat/shards?v" 注：查看某一个索引可用shards/索引名?v
7.查看集群实例存储详细信息
curl -XGET "http://ip:port/_cat/allocation?v"
8.查看当前集群的所有实例
curl -XGET "http://ip:port/_cat/nodes?v"
9.查看某索引分片转移进度
curl -XGET "http://ip:port/_cat/recovery/索引名?v"
10.查看当前集群等待任务
curl -XGET "http://ip:port/_cat/pending_tasks?v"
11.查看集群写入线程池任务
curl -XGET "http://ip:port/_cat/thread_pool/bulk?v"
12.查看集群查询线程池任务
curl -XGET "http://ip:port/_cat/thread_pool/search?v"
13.查看分片未分配的原因
curl -XGET "http://127.0.0.1:24100/_cat/shards?v&h=index,shard,prirep,state,node,unassigned.reason" | grep UNASSIGNED
二、集群设置常用命令
- 设置集群分片恢复参数
curl -XPUT "http://ip:httpport/_cluster/settings" -H 'Content-Type: application/json' -d' { "transient": { "cluster.routing.allocation.node_initial_primaries_recoveries":60, "cluster.routing.allocation.node_concurrent_recoveries":30, "cluster.routing.allocation.cluster_concurrent_rebalance":30 } }'
- 根据实例名称使EsNodeX实例下线：
curl -XPUT "http://ip:httpport/_cluster/settings" -H 'Content-Type: application/json' -d' { "transient": { "cluster.routing.allocation.exclude._name": "EsNode2@ip" } }'
- 根据ip使ES数据节点下线：
curl -XPUT "http://ip:httpport/_cluster/settings" -H 'Content-Type: application/json' -d' { "transient": { "cluster.routing.allocation.exclude._ip": "ip1,ip2,ip3" } }'
- 设置分片恢复过程中的最大带宽速度：
curl -XPUT "http://127.0.0.1:24100/_cluster/settings" -H 'Content-Type: application/json' -d'{ "transient":{ "indices.recovery.max_bytes_per_sec":"500mb" }}'
- 重新分片为空的主分片
curl -XPOST "http://127.0.0.1:24100/_cluster/reroute?pretty" -H 'Content-Type:application/json' -d '{ "commands": [{ "allocate_empty_primary": { "index": "indexname", "shard": 2, "node": "EsNode1@81.20.5.24", "accept_data_loss":true } }]}'
- 重新分配主分片，会尝试将过期副本分片分片为主。
curl -XPOST "http://127.0.0.1:24100/_cluster/reroute?pretty" -H 'Content-Type:application/json' -d '{ "commands": [{ "allocate_stale_primary": { "index": "index1", "shard": 2, "node": "EsNode1@189.39.172.103", "accept_data_loss":true } }]}'
- 清理ES所有缓存
curl -XPOST "http://ip:port/_cache/clear"
8.关闭分片自动平衡
curl -XPUT "http://ip:port/_cluster/settings" -H 'Content-Type:application/json' -d '{ "transient":{ "cluster.routing.rebalance.enable":"none" }}'
9.手动刷新未分配的分片
curl -XPOST "http://127.0.0.1:24100/_cluster/reroute?retry_failed=true"
三、索引查看常用命令
- 查询索引mapping和settings
curl -XGET --tlsv1.2 --negotiate -k -u : 'https://ip:port/my_index_name?pretty'
- 查询索引settings
curl -XGET--tlsv1.2 --negotiate -k -u : 'https://ip:port/my_index_name/_settings?pretty'
3.查看分片未分配详细命令
curl -XGET "http://127.0.0.1:24100/_cluster/allocation/explain?pretty" -H 'Content-Type:application/json' -d '{"index": "indexname","shard": 17,"primary": true}'
4.修改索引只读字段属性为null，放开写入
curl -XPUT "http://127.0.0.1:24100/*/_settings" -H 'Content-Type: application/json' -d '{"index.blocks.read_only_allow_delete": null}'
四、索引设置常用命令
1.关闭索引
curl -XPOST 'http://ip:port/my_index/_close?pretty'
2.打开索引
curl -XPOST 'http://ip:port/my_index/_open?pretty'
3.修改索引刷新时间：
curl -XPUT 'http://ip:port/my_index/_settings?pretty' -H 'Content-Type: application/json' -d'{"refresh_interval" : "60s"}'
4.修改translog文件保留时长，默认为12小时
curl -XPUT 'http://ip:port/my_index/_settings?pretty' -H 'Content-Type: application/json' -d'{"index.translog.retention.age" : "30m"}'
5.设置索引副本：
curl -XPUT 'http://ip:port/my_index/_settings?pretty' -H 'Content-Type: application/json' -d'{"number_of_replicas" : 1}'
6.执行refresh，将内存数据刷新到磁盘缓存
curl -XPOST 'http://ip:port/myindex/_refresh'
7.执行flush，将磁盘缓存刷新到文件系统
curl -XPOST 'https://ip:port/myindex/_flush'
8.执行synced flush，生成syncid
curl -XPOST 'http://ip:port/_flush/synced'
- 强制执行段合并
curl -XPOST 'http://ip:httpport/myindex/_forcemerge?only_expunge_deletes=false&max_num_segments=1&flush=true&pretty'
10.设置索引在每个esnode上的分片个数
curl -XPUT 'http://ip:httpport/myindex/_settings?pretty' -H 'Content-Type: application/json' -d'{"index.routing.allocation.total_shards_per_node" : "2"}'
- 配置控制段合并的refresh、merge线程数等
curl -XPUT "http://ip:port/my_index/_settings?pretty" -H 'Content-Type: application/json' -d'{"refresh_interval": "60s","merge":{"scheduler"：{"max_merge_count" : "100","max_thread_count" : "1"},"policy":{"segments_per_tier" : "100","floor_segment" : "1m","max_merged_segment" : "2g"}}}'
12.设置索引的刷新时间和translog配置参数
注意：设置translog参数，必须先关闭索引，设置完成后再打开
代表设置所有索引，如果要设置具体某个索引，可以将替换为具体的索引名称
curl -XPUT "http://ip:httpport/*/_settings" -H 'Content-Type: application/json' -d'{ "index":{ "refresh_interval" : "60s","translog":{ "flush_threshold_size": "1GB", "sync_interval": "120s", "durability": "async"}}}'
13.限制每个索引在每个实例上的分片个数
curl -XPUT 'http://ip:httpport/myindex/_settings?pretty' -H 'Content-Type:application/json' -d '{"index.routing.allocation.total_shards_per_node":"2"}'
五、实例检查常用命令
1.查看实例安装插件
curl -XGET "http://ip:port/_cat/aliases"
2.查询指定ES实例的jvm参数：
curl -XGET 'http://ip:port/_nodes/EsNode1*/stats/jvm?pretty'curl -XGET 'http://ip:port/_nodes/EsNode1@12.40.16.156/stats/jvm?pretty'
