使用Salt-ssh部署Salt-minion之源码安装（二）
二、源码安装篇
使用salt-ssh功能要求客户端系统python版本2.6+
1.salt-minion端环境：
系统：SUSE SP3 64bit
python版本：2.6.6
RPM包：pcre-devel #不安装，编译swig报错
2.配置/etc/salt/roster
例：
10.10.10.30:
host: 10.10.10.30
user: syspub #普通用户，有无密码sudo权限
passwd: 123456aa
sudo: True
timeout: 15
当客户端数量较多时，手工配置/etc/salt/roster比较繁琐，这里写一个简单脚本供参考
vim ip.sh #!/bin/bash for i in `cat /root/gg` do echo "$i:" >> /etc/salt/roster echo " host: $i" >> /etc/salt/roster echo " user: syspub" >> /etc/salt/roster echo " passwd: 123456aa" >> /etc/salt/roster echo " sudo: True" >> /etc/salt/roster echo " timeout: 15" >> /etc/salt/roster done
其中/root/gg为客户端IP表，例：
10.10.10.30
10.10.10.31
10.10.10.32
3.编写state.sls文件
路径：/srv/salt/minions/
目录树结构如下：
|conf
|---minion
|---after.local
|install2.sls
其中minion文件为salt-minion版本自带默认minion文件，after.local为配置salt-minion开机自起文件，内容如下：
#cat after.local
salt-minion -d
a.编写/srv/salt/minions/install2.sls
sources_download:
cmd.run:
- cwd: /usr/src
- names:
- wget http://yum.deepay.3g/SOFT/salt/setuptools-18.3.2.tar.gz http://yum.deepay.3g/SOFT/salt/python-dateutil-1.5.tar.gz http://yum.deepay.3g/SOFT/salt/PyYAML-3.11.tar.gz http://yum.deepay.3g/SOFT/salt/MarkupSafe-0.23.tar.gz http://yum.deepay.3g/SOFT/salt/Jinja2-2.8.tar.gz http://yum.deepay.3g/SOFT/salt/pycrypto-2.6.tar.gz http://yum.deepay.3g/SOFT/salt/libsodium-1.0.2.tar.gz http://yum.deepay.3g/SOFT/salt/zeromq-4.1.3.tar.gz http://yum.deepay.3g/SOFT/salt/pyzmq-14.1.1.tar.gz http://yum.deepay.3g/SOFT/salt/msgpack-python-0.4.6.tar.gz http://yum.deepay.3g/SOFT/salt/yaml-0.1.6.tar.gz http://yum.deepay.3g/SOFT/salt/msgpack-pure-0.1.3.tar.gz http://yum.deepay.3g/SOFT/salt/swig-2.0.11.tar.gz http://yum.deepay.3g/SOFT/salt/M2Crypto-0.22.3.tar.gz http://yum.deepay.3g/SOFT/salt/salt-2015.5.5.tar.gz
#上为自制地址源
- unless: test -e setuptools-18.3.2.tar.gz
setuptools_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf /usr/src/setuptools-18.3.2.tar.gz ;cd setuptools-18.3.2 ;sudo python setup.py build ;sudo python setup.py install
- unless: test -d setuptools-18.3.2
pythondateutil_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf python-dateutil-1.5.tar.gz ;cd python-dateutil-1.5 ;sudo python setup.py install
- unless: test -d python-dateutil-1.5
- require:
- cmd: setuptools_install
PyYAML_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf PyYAML-3.11.tar.gz ;cd PyYAML-3.11 ;sudo python setup.py install
- unless: test -d PyYAML-3.11
- require:
- cmd: pythondateutil_install
MarkupSafe_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf MarkupSafe-0.23.tar.gz ;cd MarkupSafe-0.23 ;sudo python setup.py install
- unless: test -d MarkupSafe-0.23
- require:
- cmd: PyYAML_install
Jinja2_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf Jinja2-2.8.tar.gz ;cd Jinja2-2.8 ;sudo python setup.py install
- unless: test -d Jinja2-2.8
- require:
- cmd: MarkupSafe_install
pycrypto_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf pycrypto-2.6.tar.gz ;cd pycrypto-2.6 ;sudo python setup.py install
- unless: test -d pycrypto-2.6
- require:
- cmd: Jinja2_install
libsodium_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf libsodium-1.0.2.tar.gz ;cd libsodium-1.0.2 ;sudo ./configure CC="gcc -m64" --prefix=/usr --libdir=/usr/lib64 && sudo make && sudo make install
- unless: test -d libsodium-1.0.2
- require:
- cmd: pycrypto_install
zeromq_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf zeromq-4.1.3.tar.gz ;cd zeromq-4.1.3 ;sudo ./configure --prefix=/usr CC="gcc -m64" PKG_CONFIG_PATH="/usr/lib64/pkgconfig" --libdir=/usr/lib64 && sudo make && sudo make install
- unless: test -d zeromq-4.1.3
- require:
- cmd: libsodium_install
pyzmq_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf pyzmq-14.1.1.tar.gz ;cd pyzmq-14.1.1 ;sudo python setup.py install
- unless: test -d pyzmq-14.1.1
- require:
- cmd: zeromq_install
msgpackpython_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf msgpack-python-0.4.6.tar.gz ;cd msgpack-python-0.4.6 ;sudo python setup.py install
- unless: test -d msgpack-python-0.4.6
- require:
- cmd: pyzmq_install
yaml_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf yaml-0.1.6.tar.gz ;cd yaml-0.1.6/ ;sudo ./configure && sudo make && make install
- unless: test -d yaml-0.1.6
- require:
- cmd: msgpackpython_install
msgpackpure_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf msgpack-pure-0.1.3.tar.gz ;cd msgpack-pure-0.1.3 ;sudo python setup.py install
- unless: test -d msgpack-pure-0.1.3
- require:
- cmd: yaml_install
swig_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf swig-2.0.11.tar.gz ;cd swig-2.0.11/ ;sudo ./configure ;sudo make ;sudo make install ;sudo rm -rf /usr/bin/swig; sudo ln -s /usr/local/bin/swig /usr/bin/swig
- unless: test -d swig-2.0.11
- require:
- cmd: msgpackpure_install
M2Crypto_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf M2Crypto-0.22.3.tar.gz ;cd M2Crypto-0.22.3/ ;sudo python setup.py build build_ext ;sudo python setup.py install
- unless: test -d M2Crypto-0.22.3
- require:
- cmd: swig_install
salt_install:
cmd.run:
- cwd: /usr/src
- names:
- sudo tar zxf salt-2015.5.5.tar.gz ;cd salt-2015.5.5 ;sudo python setup.py install ;sudo ln -s /usr/local/python2.6.6/bin/salt-minion /usr/bin/salt-minion
- unless: test -d salt-2015.5.5
- require:
- cmd: M2Crypto_install
minion_conf:
cmd.run:
- names:
- sudo mkdir -p /etc/salt;
- unless: test -d /etc/salt
file.managed:
- name: /etc/salt/minion
- source: salt://minions/conf/minion
- user: root
- group: root
- mode: 640
- template: jinja
- defaults:
minion_id: {{ grains['fqdn_ip4'][0] }}
- unless: test -e /etc/salt/minion
- require:
- cmd: salt_install
minion_service:
cmd.run:
- name: sudo salt-minion -d &
- unless: ps aux | grep salt-minion | grep -v grep
- require:
- file: minion_conf
minion_file:
file.managed:
- name: /etc/init.d/after.local
- source: salt://minions/conf/after.local
- user: root
- group: root
- mode: 755
- unless: test -e /etc/init.d/after.local
- require:
- cmd: minion_service
b.minion文件为salt-minion版本自带默认minion文件
4.部署salt-minion
salt-ssh端执行如下命令：
salt-ssh -i '*' state.sls minions.install2
验证：
salt-ssh -ir '*' 'ps aux | grep salt' | grep salt | grep -v grep | wc -l
对比与/root/gg中IP数目是否相等
三、问题解决
