kali 命令

1.添加用户

如下命令是用root执行的

adduser dong

会直接在/home 目录创建 dong 目录

2.将用户划分到某个组

gpasswd -a user group

 3.ifconfig 查看可用的网卡接口

root@kali:/etc/network# ifconfig -a 
eth0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 00:0c:29:af:84:83  txqueuelen 1000  (Ethernet)
        RX packets 3696  bytes 5108125 (4.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1439  bytes 99503 (97.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 372  bytes 23924 (23.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 372  bytes 23924 (23.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 4.启动网卡eth0

root@kali:/etc/network# ifconfig eth0 up

 5.更改软件安装源添加阿里云和中科大源

vim  /etc/apt/sources.list

#aliyun 阿里云
deb http://mirrors.aliyun.com/kali kali-rolling main non-free contrib
deb-src http://mirrors.aliyun.com/kali kali-rolling main non-free contrib

# ustc 中科大
deb http://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib
deb-src http://mirrors.ustc.edu.cn/kali kali-rolling main non-free contrib

# kali 官方源
deb http://http.kali.org/kali kali-rolling main non-free contrib 
deb-src http://http.kali.org/kali kali-rolling main non-free contrib

 6.安装搜狗输入法

0)apt-get update

1).apt-get install fcitx
2).按照提示输入 apt --fix-broken install 继续安装
3).搜狗官网下载。deb包 sogoupinyin_2.2.0.0108_amd64.deb
4)打开终端切换到 deb 所在的目录，执行dpkg -i sogoupinyin_2.2.0.0108_amd64.deb
5)在设置-> region-language 中设置输入源为中文，

重启生效

 7.kali 下使用scrot 截图

1）安装scrot：apt-get install Scrot

此工具需要在terminal 中使用

2）截取全屏：scrot

3）选择性截屏：scrot -s
4）为了不把终端截屏到图内，可以结合使用延时截图功能，scrot -s -d 10  先选取要截图的部分，然后关闭终端，这样终端就不会出现在图内了

8.kali 下安装docker

1）Create a backports file and add the entry for Debian Wheezy:

echo 'deb http://http.debian.net/debian wheezy-backports main' > /etc/apt/sources.list.d/backports.list && apt-get update

2）Install ca-certificates and allow APT to operate via https:

apt-get install apt-transport-https ca-certificates

3）Add the appropriate GPG key:

apt-key adv --keyserver hkp://p80.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D

4）Add the appropriate Docker source entry:

echo 'deb https://apt.dockerproject.org/repo debian-wheezy main' > /etc/apt/sources.list.d/docker.list && apt-get update

5）Install Docker and start its service:

apt-get install docker-engine && service docker start

6）Verify that Docker is working:

docker run hello-world

 8.docker 中安装mysql

1.查看有哪些关于mysql的镜像
docker search mysql
2.安装mysql 5.6
docker pull mysql:5.6
3.查看mysql镜像是否下载完成
docker images |grep mysql
4.在docker 中运行mysql
docker run -di --name pinyougou_mysql -p 3306:3306 -e MYSQL_ROOT_PASSWORD=123456 mysql:5.6
--name 是容器的名字
-p3306:3306 把主机的3306端口绑定到docker mysql 3306端口，
-e 之后设置的mysql的密码，
mysql:5.6 指定启动的mysql及版本
5.进入到docker 中我们刚创建的容器的bash
docker exec -it pinyougou_mysql /bin/bash
6.mysql -u root -p 进入mysql

 9.kali 设置firefox 所有页面缩放比例为 150%

1)在地址栏输入：about:config 打开配置信息，点击 accept
2）搜索 layout.css.devPixelsPerPx 更改其值为1.5