C++转C#函数事例
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; using System.Windows.Forms; namespace FDEP { /// <summary> /// 罗旭成 /// 深证通函数转换 /// </summary> public class ImportDLL { #region * 常量定义 //***************************************************************** //协议类型常量 //名称 定义值 说明 //MR_PROTOCOLTYPE_MRSTANDAND 0x01 FDEP规定的标识业务协议 //MR_PROTOCOLTYPE_SELFCUSTOM 0xFF 用户自定义协议类型 /// <summary> /// 协议类型常量 /// </summary> public const uint MR_PROTOCOLTYPE_MRSTANDAND = 0x01; // SBSP标准业务协议。 public const uint MR_PROTOCOLTYPE_SELFCUSTOM = 0xFF; // 用户自定义协议类型。 //***************************************************************** //消息标识位常量 //名称 定义值 说明 //MR_MSGFLAG_PERSIST 0x01 持久消息标志，用于可靠传输。目前暂不支持 //MR_MSGFLAG_COMPRESS 0x02 压缩标志，需进行压缩传输 /// <summary> /// 消息标志位常量 /// </summary> public const uint MR_MSGFLAG_PERSIST = 0x01; // 持久消息标志，用于可靠传输。 public const uint MR_MSGFLAG_COMPRESS = 0x02; // 压缩标志，需进行压缩传输。 //***************************************************************** //长度常量 //名称 定义值 说明 //MR_MAXLEN_ADDR 64 用户标识及应用标识的最大长度 //MR_MAXLEN_PKGID 64 消息包标识的最大长度 //MR_MAXLEN_USERDATA 256 用户保留数据的最大长度 //MR_FIXLEN_EXPIREDABSTIME 20 过期绝对时间固定长度 /// <summary> /// 消息标志位常量 /// </summary> public const int MR_MAXLEN_ADDR = 64; // 用户标识及应用标识的最大长度。 public const int MR_MAXLEN_PKGID = 64; // 消息包标识的最大长度。 public const int MR_MAXLEN_USERDATA = 256; // 用户保留数据的最大长度。 public const int MR_FIXLEN_EXPIREDABSTIME = 20; // 过期绝对时间固定长度。 //***************************************************************** //函数返回错误值 //MR_ERRCODE_OK 0 //MR_ERRCODE_PARAMERR -1 //MR_ERRCODE_CONNERR -2 //MR_ERRCODE_TIMEEXPIRED -3 //MR_ERRCODE_TIMEOUT -4 //MR_ERRCODE_NOMSG -5 //MR_ERRCODE_BUFTOOSHORT -6 //MR_ERRCODE_BUFTOOBIG -7 //MR_ERRCODE_SYSERROR -8 #endregion #region * 结构体的定义 /// <summary> /// 用来表示一条消息的各种属性 /// </summary> [StructLayout(LayoutKind.Sequential)] public struct STUsgProperty { [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_ADDR)] public string m_szSourceUserID;//MR_MAXLEN_ADDR 源用户标识，以“\0”结尾的字符串 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_ADDR)] public string m_szSourceAppID;//MR_MAXLEN_ADDR 源应用标识，以“\0”结尾的字符串 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_ADDR)] public string m_szDestUserID;//MR_MAXLEN_ADDR 目的用户标识，以“\0”结尾的字符串 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_ADDR)] public string m_szDestAppID;//MR_MAXLEN_ADDR 目的应用标识，以“\0”结尾的字符串 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_PKGID)] public string m_szPkgID;//MR_MAXLEN_PKGID 消息包的包标识，以“\0”结尾的字符串，或者由用户调用MrCreatePkgID函数生成，或者为空(即'\0') [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_PKGID)] public string m_szCorrPkgID;//MR_MAXLEN_PKGID 相关包标识，以“\0”结尾的字符串，供用户自用 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_USERDATA)] public string m_szUserData1;//MR_MAXLEN_USERDATA 用户数据1，以“\0”结尾的字符串，供用户自用 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_MAXLEN_USERDATA)] public string m_szUserData2;//MR_MAXLEN_USERDATA 用户数据2，以“\0”结尾的字符串，供用户自用 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = MR_FIXLEN_EXPIREDABSTIME)] public string m_szExpiredAbsTime;//MR_FIXLEN_EXPIREDABSTIME 该消息的过期时间，以“\0”结尾的字符串，格式为“YYYY-MM-DD HH:MM:SS”。也可以置空，此时如果目的用户不在线，或者目的应用未连接，则消息立即过期。 public byte m_ucFlag;//消息标识，有8个二进制位组成，各位含义如下:位0 --为1表示持久消息，需可靠传输，暂不支持； //位1 --为1表示消息需压缩传输 public byte m_ucProtocolType;//协议类型标识，取值可以是下列之一:MR_PROTOCOLTYPE_MRSTANDAND 0x01 FDEP规定的标准业务协议 //MR_PROTOCOLTYPE_SELFCUSTOM 0xFF 用户自定义协议类型 } /// <summary> /// 用来定义与接入客户端建立连接所需的各种信息 /// </summary> [StructLayout(LayoutKind.Sequential)] public struct STUConnInfo { [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)] public string m_szMRIP;//接入客户端消息路由器的IP地址，以"\0"结尾的字符串，格式为“xxx.xxx.xxx.xxx” public UInt16 m_usMRPort;//接入客户端消息路由器的连接端口 [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 16)] public string m_szMRIPBak;//备用消息路由器的IP地址，不设置备用消息路由器时可以为空 public UInt16 m_usMRPortBak;//备用消息路由器的连接端口，不设置备用消息路由器时可以为0 } #endregion #region * 函数的定义 /// <summary> /// 定义的回调函数 /// </summary> /// <param name="psPkg">要发送的消息包缓冲区</param> /// <param name="iPkgLen">缓冲区中的消息包长度</param> /// <param name="pMsgPropery">消息包属性</param> /// <param name="pvUserData">供回调函数使用的用户数据</param> /// <returns></returns> [UnmanagedFunctionPointerAttribute(CallingConvention.StdCall)] public delegate int OnReceiveCallBack(string psPkg, int iPkgLen, ref STUsgProperty pMsgPropery, IntPtr pvUserData); //typedef int (*OnReceiveCallBack)(const char* psPkg, int iPkgLen, const STUMsgProperty* pMsgPropery, void* pvUserData); /// <summary> /// 1.初始化，获取相关资源，并尝试与接入客户端FDAP建立连接 /// </summary> /// <param name="psAppID">本应用的应用标识</param>[in] /// <param name="psPasswd">本应用在接入客服端设置的密码，密码必须与预设的匹配才能继续</param>[in] /// <param name="onReceive">接收到消息包时的回调函数</param>[in] /// <param name="oConnInfo">接入客户端连接信息</param>[in] /// <param name="pvUserData">供回调函数使用的用户数据</param>[in] /// <returns>NULL 初始化失败 非NULL 初始化成功，返回一个连接句柄，给句柄将作为其他函数调用的参数</returns> [DllImport("mrapi.dll", EntryPoint = "MrInit", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrInit(string psAppID, string psPasswd, OnReceiveCallBack onReceive, STUConnInfo oConnInfo, IntPtr pvUserData); //void* _stdcall MrInit(const char* psAppID, const char* psAppPasswd,OnReceiveCallBack onReceive,const STUConnInfo oConnInfo, void* pvUserData); /// <summary> /// 2.初始化，获取相关资源，并尝试与接入客户端FDAP建立连接 /// </summary> /// <param name="psUserCertID">本应用的用户标识</param>[in] /// <param name="psAppID">本应用的应用标识</param>[in] /// <param name="psPasswd">本应用在接入客服端设置的密码，密码必须与预设的匹配才能继续</param>[in] /// <param name="onReceive">接收到消息包时的回调函数</param>[in] /// <param name="oConnInfo">接入客户端连接信息</param>[in] /// <param name="pvUserData">供回调函数使用的用户数据</param>[in] /// <returns>NULL 初始化失败 非NULL 初始化成功，返回一个连接句柄，给句柄将作为其他函数调用的参数</returns> [DllImport("mrapi.dll", EntryPoint = "MrInit1", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrInit1(string psUserCertID, string psAppID, string psPasswd, OnReceiveCallBack onReceive, STUConnInfo oConnInfo, IntPtr pvUserData); /// <summary> /// 3.连接FDAP时的初始化函数。该函数对FDEAPI进行初始化，分配获取相关资源，并尝试与接入客户端建立通信连接 /// </summary> /// <param name="pHandle">函数返回的句柄，该句柄将作为其他函数调用的参数</param>[out] /// <param name="psUserCertID">本应用的用户标识</param>[in] /// <param name="psAppID">本应用的应用标识</param>[in] /// <param name="psPasswd">本应用在接入客户端设置的密码，密码必须与预设的匹配才能继续</param>[in] /// <param name="pMsgProperty">消息包属性</param>[in] /// <param name="onReceive">接收到消息包时的回调函数</param>[in] /// <param name="oConnInfo">接入客户端连接信息</param>[in] /// <param name="pvUserData">供回调函数使用的用户数据</param>[in] /// <param name="iThreadCount">调用回头函数OnReceive的线程数目</param>[in] /// <returns>无</returns> [DllImport("mrapi.dll", EntryPoint = "MrInit1Ex1", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrInit1Ex1(out IntPtr pHandle, string psUserCertID, string psAppID, string psPasswd, ref STUsgProperty pMsgProperty, OnReceiveCallBack onReceive, STUConnInfo oConnInfo, IntPtr pvUserData, int iThreadCount); /// <summary> /// 4.连接FDAP时的初始化函数。该函数对FDEAPI进行初始化，分配获取相关资源，并尝试与接入客户端建立通信连接 /// </summary> /// <param name="pHandle">函数返回的句柄，该句柄将作为其他函数调用的参数</param>[out] /// <param name="psAppID">本应用的应用标识</param>[in] /// <param name="psPassws">本应用在接入客户端设置的密码，密码必须与预设的匹配才能继续</param>[in] /// <param name="pOnRecvMsgPropery">这是回调函数OnReceive的接收条件，如果不需要任何条件，则可以填NULL</param>[in] /// <param name="onReceive">接收到消息包时的回调函数</param>[in] /// <param name="pConnInfo">接入客户端连接信息</param>[in] /// <param name="pvUserData">供回调函数使用的用户数据</param>[in] /// <param name="iThreadCount">调用回头函数OnReceive的线程数目</param> /// <returns>无</returns> [DllImport("mrapi.dll", EntryPoint = "MrInit2", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrInit2(out IntPtr pHandle, string psAppID, string psPassws, ref STUsgProperty pOnRecvMsgPropery, OnReceiveCallBack onReceive, ref STUConnInfo pConnInfo, IntPtr pvUserData, int iThreadCount); //void* _stdcall MrInit2(void** ppHandle, const char* psAppID, const char* psAppPasswd, STUMsgProperty* pOnRecvMsgPropery,OnReceiveCallBack onReceive,const STUConnInfo* pConnInfo, void* pvUserData, int iThreadCount); /// <summary> /// 5.判断与交换中枢的连接是否正常 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param> /// <returns>0不正常 1正常</returns> [DllImport("mrapi.dll", EntryPoint = "MrIsLinkOK", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrIsLinkOK(IntPtr pHandle); //int _stdcall MrIsLinkOK(void* pHandle) /// <summary> /// 6.消息包标识生成函数 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="szPkgID">生成的消息包标识</param>[out] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrCreatePkgID", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrCreatePkgID(IntPtr pHandle, StringBuilder szPkgID); //int _stdcall MrCreatePkgID(void* pHandle,char szPkgID[MR_MAXLEN_PKGID]) /// <summary> /// 7.消息包发送函数 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="psPkg">要发送的消息包缓冲区</param>[in] /// <param name="iPkgLen">缓冲区中的消息包长度</param>[in] /// <param name="pMsgPropery">消息包属性</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrSend", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrSend(IntPtr pHandle, string psPkg, int iPkgLen, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrSend(void* pHandle,const char* psPkg,int iPkgLen,STUsgProperty* pMsgPropery,int iMillSecTimeo); /// <summary> /// 8.消息包接收函数1 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="ppsPkg">双指针，返回包所指向的内存</param>[out] /// <param name="piOutPkgLen">接收到消息包的实际长度</param>[out] /// <param name="pMsgPropery">接收条件</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrReceive1", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrReceive1(IntPtr pHandle, out IntPtr ppsPkg, out int piOutPkgLen, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrReceive1(void* pHandle, char** ppsPkg, int* piOutPkgLen, STUMsgProperty* pMsgPropery, int iMillSecTimeo); /// <summary> /// 9.消息包内存释放函数 /// </summary> /// <param name="psPkg">由MrReceivel1函数的第二个参数返回的指针</param>[in] /// <returns>无</returns> [DllImport("mrapi.dll", EntryPoint = "MrReceive1_FreeBuf", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrReceive1_FreeBuf(string psPkg); //void _stdcall MrReceive1_FreeBuf(char* psPkg); /// <summary> /// 10.消息包浏览函数 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="piOutPkgLen">接收到消息包的实际长度</param>[out] /// <param name="pMsgPropery">接收条件</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrBrowse", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrBrowse(IntPtr pHandle, out int piOutPkgLen, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrBrowse(void* pHandle, int* piOutPkgLen, STUMsgProperty* pMsgPropery, int iMillSecTimeo); /// <summary> /// 11.消息包接收函数2 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="ppsPkg">双指针，返回包所指向的内存</param>[out] /// <param name="piOutPkgLen">接收到消息包的实际长度</param>[out] /// <param name="iBufLenIn">消息包缓冲区大小</param>[out] /// <param name="pMsgPropery">接收条件</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrReceive2", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrReceive2(IntPtr pHandle, out IntPtr ppsPkg, out int piOutPkgLen, out int iBufLenIn, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrReceive2(void* pHandle, char** ppsPkg, int* piOutPkgLen, int* iBufLenIn, STUMsgProperty* pMsgPropery, int iMillSecTimeo); /// <summary> /// 12.消息包接收函数3 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="ppsPkg">双指针，返回包所指向的内存</param>[out] /// <param name="piOutPkgLen">接收到消息包的实际长度</param>[out] /// <param name="piErrSXCode">交换错误的原因码</param>[out] /// <param name="pMsgPropery">接收条件</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrReceive3", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrReceive3(IntPtr pHandle, out IntPtr ppsPkg, out int piOutPkgLen, out int piErrSXCode, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrReceive3(void* pHandle, char** ppsPkg, int* piOutPkgLen, int* piErrSXCode, STUMsgProperty* pMsgPropery, int iMillSecTimeo); /// <summary> /// 13.消息包接收函数4 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param>[in] /// <param name="ppsPkg">双指针，返回包所指向的内存</param>[out] /// <param name="piOutPkgLen">接收到消息包的实际长度</param>[out] /// <param name="piErrSXCode">交换错误的原因码</param>[out] /// <param name="pMsgPropery">接收条件</param>[in/out] /// <param name="iMillSecTimeo">以毫米为单位的接收最大超时时间</param>[in] /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrReceive4", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrReceive4(IntPtr pHandle, out IntPtr ppsPkg, out int piOutPkgLen, out int piErrSXCode, ref STUsgProperty pMsgPropery, int iMillSecTimeo); //int _stdcall MrReceive4(void* pHandle, char** ppsPkg, int* piOutPkgLen, int* piErrSXCode, STUMsgProperty* pMsgPropery, int iMillSecTimeo); /// <summary> /// 14.释放资源 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值</param> /// <returns>无</returns> [DllImport("mrapi.dll", EntryPoint = "MrDestroy", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern IntPtr MrDestroy(IntPtr pHandle); //void _stdcall MrDestroy(void* pHandle) /// <summary> /// 15.取得本API的版本号 /// </summary> /// <param name="psBufVersion">返回的版本号</param> /// <param name="iBufLen">版本号长度</param> /// <returns>无</returns> [DllImport("mrapi.dll", EntryPoint = "MrGetVersion", CallingConvention = CallingConvention.StdCall, CharSet = CharSet.Ansi)] public static extern IntPtr MrGetVersion(StringBuilder psBufVersion, int iBufLen); //void _stdcall MrGetVersion(char* psBufVersion,int iBufLen); /// <summary> /// 16.注册包下推条件 /// </summary> /// <param name="pHandle">连接句柄，调用MrInit时返回的值<</param> /// <param name="pMsgPropery">消息的结构实体</param> /// <param name="iType">0 增加一个条件 1 删除一个条件 2 清空所有条件</param> /// <returns>0 成功 其他 失败</returns> [DllImport("mrapi.dll", EntryPoint = "MrRegRecvCondition", CallingConvention = CallingConvention.StdCall, SetLastError = true, CharSet = CharSet.Ansi)] public static extern int MrRegRecvCondition(IntPtr pHandle, ref STUsgProperty pMsgPropery, int iType); //int _stdcall MrRegRecvCondition(void* pHandle,STUMsgProperty* pMsgPropery,int iType); #endregion } }
个人主要研究：金融系统、MIS系统、人力资源管理系统、数据采集系统、权限管理系统等等系统。主攻C#开发语言，Oracle、Sql Server,WCF和Remoting通信。
如需联系可加QQ：442389681 Email：lxc880615@163.com 手机：18922735098
QQ群交流：186841119 (请注明来自博客园)
博客园地址：http://www.cnblogs.com/jara/ http://www.cnblogs.com/luoyuhao/
提示：本文版权归作者和博客园共有，欢迎转载，但未经作者同意必须保留此段声明，且在文章页面明显位置给出原文连接，否则保留追究法律责任的权利。
如果觉得还有帮助的话，可以点一下右下角的【推荐】，希望能够持续的为大家带来好的技术文章！想跟我一起进步么？那就【关注】我吧。
如果对文章有任何问题，都可以在评论中留言，我会尽可能的答复您，谢谢您的阅读
