Huawei-R&S-网络工程师实验笔记20190609-VLAN划分综合(Access和Trunk端口)

》Huawei-R&S-网络工程师实验笔记20190609-VLAN划分综合(Access和Trunk端口)

》》实验开始,先上拓扑图参考:

》》》实验目标:将交换机连接主机的端口类型配置为Access端口,并划分到对应的VLAN中;将交换机互联端口配置为Trunk端口,并允许通过vlan10和vlan20.

[SWA]vlan batch 10 20      //批处理创建vlan10和vlan20
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA]
Jun  9 2019 16:36:14-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 1, the c
hange loop count is 0, and the maximum number of records is 4095.

[SWA]int g0/0/2
[SWA-GigabitEthernet0/0/2]port link-type access      //配置端口G0/0/2的类型为Access端口
[SWA-GigabitEthernet0/0/2]
Jun  9 2019 16:47:04-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 2, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-GigabitEthernet0/0/2]port default vlan 10      //将端口G0/0/2加入vlan10
[SWA-GigabitEthernet0/0/2]
Jun  9 2019 16:48:14-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 3, the c
hange loop count is 0, and the maximum number of records is 4095.

[SWA-GigabitEthernet0/0/2]int g0/0/3
[SWA-GigabitEthernet0/0/3]port link-type access      //配置端口G0/0/3的类型为Access端口
[SWA-GigabitEthernet0/0/3]
Jun  9 2019 16:48:54-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-GigabitEthernet0/0/3]port default vlan 20      //将端口G0/0/3加入vlan20
[SWA-GigabitEthernet0/0/3]
Jun  9 2019 16:49:34-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-GigabitEthernet0/0/3]q

[SWA]int g0/0/1
[SWA-GigabitEthernet0/0/1]port link-type trunk      //配置端口G0/0/1的类型为Trunk端口
[SWA-GigabitEthernet0/0/1]
Jun  9 2019 16:50:14-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20      //配置G0/0/1(Trunk端口)允许vlan10和vlan20通过
[SWA-GigabitEthernet0/0/1]
Jun  9 2019 16:51:04-08:00 SWA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.
[SWA-GigabitEthernet0/0/1]q

[SWA]dis vlan      //查看vlan的配置情况
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------
VID  Type    Ports                                                          
--------------------------------------------------------------------------------
1    common  UT:GE0/0/1(U)      GE0/0/4(D)      GE0/0/5(D)      GE0/0/6(D)      
                GE0/0/7(D)      GE0/0/8(D)      GE0/0/9(D)      GE0/0/10(D)     
                GE0/0/11(D)     GE0/0/12(D)     GE0/0/13(D)     GE0/0/14(D)     
                GE0/0/15(D)     GE0/0/16(D)     GE0/0/17(D)     GE0/0/18(D)     
                GE0/0/19(D)     GE0/0/20(D)     GE0/0/21(D)     GE0/0/22(D)     
                GE0/0/23(D)     GE0/0/24(D)                                     

10   common  UT:GE0/0/2(U)                                                      

             TG:GE0/0/1(U)                                                      

20   common  UT:GE0/0/3(U)                                                      

             TG:GE0/0/1(U)                                                      

VID  Status  Property      MAC-LRN Statistics Description      
--------------------------------------------------------------------------------
1    enable  default       enable  disable    VLAN 0001                         
10   enable  default       enable  disable    VLAN 0010                         
20   enable  default       enable  disable    VLAN 0020                         

[SWA]dis port vlan active      //查看vlan端口激活情况
T=TAG U=UNTAG
-------------------------------------------------------------------------------
Port                Link Type    PVID    VLAN List
-------------------------------------------------------------------------------
GE0/0/1             trunk        1       U: 1        //Trunk端口 Untagged vlan1
                                         T: 10 20    //Trunk端口 Tagged vlan10 vlan20
GE0/0/2             access       10      U: 10       //Access端口 Untagged vlan10
GE0/0/3             access       20      U: 20       //Access端口 Untagged vlan20
GE0/0/4             hybrid       1       U: 1
GE0/0/5             hybrid       1       U: 1
GE0/0/6             hybrid       1       U: 1
GE0/0/7             hybrid       1       U: 1
  ---- More ----

[SWB]vlan batch 10 20          //在SWB上以此进行类似SWA的配置

[SWB]int g0/0/2
[SWB-GigabitEthernet0/0/2]port link-type access
[SWB-GigabitEthernet0/0/2]port default vlan 20

[SWB-GigabitEthernet0/0/2]int g0/0/3
[SWB-GigabitEthernet0/0/3]port link-type access
[SWB-GigabitEthernet0/0/3]port default vlan 10

[SWB-GigabitEthernet0/0/3]int g0/0/1
[SWB-GigabitEthernet0/0/1]port link-type trunk
[SWB-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20
[SWB-GigabitEthernet0/0/1]q

[SWB]dis vlan
                 
[SWB]dis port vlan active

》》》》配置完成后,ping测试同一vlan内主机互通情况,主机A ping 主机D、主机B ping 主机C 的测试结果如下图:

posted @ 2019-06-09 17:32  俊者天下  阅读(530)  评论(0编辑  收藏  举报