进程物理内存远大于Xmx的问题分析

问题描述

最近经常被问到一个问题，”为什么我们系统进程占用的物理内存(Res/Rss)会远远大于设置的Xmx值”，比如Xmx设置1.7G，但是top看到的Res的值却达到了3.0G，随着进程的运行，Res的值还在递增，直到达到某个值，被OS当做bad process直接被kill掉了。

1 2 3 4 5 6 7

top - 16:57:47 up 73 days, 4:12, 8 users, load average: 6.78, 9.68, 13.31 Tasks: 130 total, 1 running, 123 sleeping, 6 stopped, 0 zombie Cpu(s): 89.9%us, 5.6%sy, 0.0%ni, 2.0%id, 0.7%wa, 0.7%hi, 1.2%si, 0.0%st ... PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22753 admin 20 0 4252m 3.0g 17m S 192.8 52.7 151:47.59 /opt/taobao/java/bin/java -server -Xms1700m -Xmx1700m -Xmn680m -Xss256k -XX:PermSize=128m -XX:MaxPermSize=128m -XX:+UseStringCache -XX:+ 40 root 20 0 0 0 0 D 0.3 0.0 5:53.07 [kswapd0]

物理内存大于Xmx可能吗

先说下Xmx，这个vm配置只包括我们熟悉的新生代和老生代的最大值，不包括持久代，也不包括CodeCache，还有我们常听说的堆外内存从名字上一看也知道没有包括在内，当然还有其他内存也不会算在内等，因此理论上我们看到物理内存大于Xmx也是可能的，不过超过太多估计就可能有问题了。

物理内存和虚拟内存间的映射关系

我们知道os在内存上面的设计是花了心思的，为了让资源得到最大合理利用，在物理内存之上搞一层虚拟地址，同一台机器上每个进程可访问的虚拟地址空间大小都是一样的，为了屏蔽掉复杂的到物理内存的映射，该工作os直接做了，当需要物理内存的时候，当前虚拟地址又没有映射到物理内存上的时候，就会发生缺页中断，由内核去为之准备一块物理内存，所以即使我们分配了一块1G的虚拟内存，物理内存上不一定有一块1G的空间与之对应，那到底这块虚拟内存块到底映射了多少物理内存呢，这个我们在linux下可以通过/proc/<pid>/smaps这个文件看到，其中的Size表示虚拟内存大小，而Rss表示的是物理内存，所以从这层意义上来说和虚拟内存块对应的物理内存块不应该超过此虚拟内存块的空间范围

1 2 3 4 5 6 7 8 9 10 11 12 13 14

8dc00000-100000000 rwxp 00000000 00:00 0 Size: 1871872 kB Rss: 1798444 kB Pss: 1798444 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 1798444 kB Referenced: 1798392 kB Anonymous: 1798444 kB AnonHugePages: 0 kB Swap: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB

此次为了排查这个问题，我特地写了个简单的分析工具来分析这个问题，将连续的虚拟内存块合并做统计，一般来说连续分配的内存块还是有一定关系的，当然也不能完全肯定这种关系，得到的效果大致如下：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

from->to vs rss rss_percentage(rss/total_rss) merge_block_count 0x8dc00000->0x30c9a20000 1871872 1487480 53.77% 1 0x7faf7a4c5000->0x7fffa7dd9000 1069464 735996 26.60% 440 0x7faf50c75000->0x7faf6c02a000 445996 226860 8.20% 418 0x7faf6c027000->0x7faf78010000 196452 140640 5.08% 492 0x418e8000->0x100000000 90968 90904 3.29% 1 0x7faf48000000->0x7faf50c78000 131072 35120 1.27% 4 0x7faf28000000->0x7faf3905e000 196608 20708 0.75% 6 0x7faf38000000->0x7faf4ad83000 196608 17036 0.62% 6 0x7faf78009000->0x7faf7a4c6000 37612 10440 0.38% 465 0x30c9e00000->0x30ca202000 3656 716 0.03% 5 0x7faf20000000->0x7faf289c7000 65536 132 0.00% 2 0x30c9a00000->0x30c9c20000 128 108 0.00% 1 0x30ca600000->0x30cae83000 2164 76 0.00% 5 0x30cbe00000->0x30cca16000 2152 68 0.00% 5 0x7fffa7dc3000->0x7fffa7e00000 92 48 0.00% 1 0x30cca00000->0x7faf21dba000 2148 32 0.00% 5 0x30cb200000->0x30cbe16000 2080 28 0.00% 4 0x30cae00000->0x30cb207000 2576 20 0.00% 4 0x30ca200000->0x30ca617000 2064 16 0.00% 4 0x40000000->0x4010a000 36 12 0.00% 2 0x30c9c1f000->0x30c9f89000 12 12 0.00% 3 0x40108000->0x471be000 8 8 0.00% 1 0x7fffa7dff000->0x0 4 4 0.00% 0

当然这只是一个简单的分析，如果更有价值需要我们挖掘更多的点出来，比如每个内存块是属于哪块memory pool，到底是什么地方分配的等，不过需要jvm支持(注：上面的第一条，其实就是new+old+perm对应的虚拟内存及其物理内存映射情况)。

进程满足什么条件会被os因为oom而被kill

当一个进程无故消失的时候，我们一般看/var/log/message里是否有Out of memory: Kill process关键字(如果是java进程我们先看是否有crash日志)，如果有就说明是被os因为oom而被kill了：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Aug 19 08:32:38 mybank-ant kernel: : [6176841.238016] java invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0, oom_score_adj=0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238022] java cpuset=/ mems_allowed=0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238024] Pid: 25371, comm: java Not tainted 2.6.32-220.23.2.ali878.el6.x86_64 #1 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238026] Call Trace: Aug 19 08:32:38 mybank-ant kernel: : [6176841.238039] [<ffffffff810c35e1>] ? cpuset_print_task_mems_allowed+0x91/0xb0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238068] [<ffffffff81114d70>] ? dump_header+0x90/0x1b0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238074] [<ffffffff810e1b2e>] ? __delayacct_freepages_end+0x2e/0x30 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238079] [<ffffffff81213ffc>] ? security_real_capable_noaudit+0x3c/0x70 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238082] [<ffffffff811151fa>] ? oom_kill_process+0x8a/0x2c0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238084] [<ffffffff81115131>] ? select_bad_process+0xe1/0x120 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238087] [<ffffffff81115650>] ? out_of_memory+0x220/0x3c0 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238093] [<ffffffff81125929>] ? __alloc_pages_nodemask+0x899/0x930 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238099] [<ffffffff81159b6a>] ? alloc_pages_current+0xaa/0x110 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238102] [<ffffffff81111ea7>] ? __page_cache_alloc+0x87/0x90 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238105] [<ffffffff81127f4b>] ? __do_page_cache_readahead+0xdb/0x270 Aug 19 08:32:38 mybank-ant kernel: : [6176841.238108][<ffffffff81128101>]? ra_submit+0x21/0x30Aug1908:32:38 mybank-ant kernel::[6176841.238110][<ffffffff81113e17>]? filemap_fault+0x5b7/0x600Aug1908:32:38 mybank-ant kernel::[6176841.238113][<ffffffff8113ca64>]? __do_fault+0x54/0x510Aug1908:32:38 mybank-ant kernel::[6176841.238116][<ffffffff811140a0>]? __generic_file_aio_write+0x240/0x470Aug1908:32:38 mybank-ant kernel::[6176841.238118][<ffffffff8113d017>]? handle_pte_fault+0xf7/0xb50Aug1908:32:38 mybank-ant kernel::[6176841.238121][<ffffffff8111438e>]? generic_file_aio_write+0xbe/0xe0Aug1908:32:38 mybank-ant kernel::[6176841.238133][<ffffffffa008a171>]? ext4_file_write+0x61/0x1e0[ext4]Aug1908:32:38 mybank-ant kernel::[6176841.238135][<ffffffff8113dc54>]? handle_mm_fault+0x1e4/0x2b0Aug1908:32:38 mybank-ant kernel::[6176841.238138][<ffffffff81177c7a>]? do_sync_write+0xfa/0x140Aug1908:32:38 mybank-ant kernel::[6176841.238143][<ffffffff81042c69>]? __do_page_fault+0x139/0x480Aug1908:32:38 mybank-ant kernel::[6176841.238147][<ffffffff8118ad22>]? vfs_ioctl+0x22/0xa0Aug1908:32:38 mybank-ant kernel::[6176841.238151][<ffffffff814e4f8e>]? do_page_fault+0x3e/0xa0Aug1908:32:38 mybank-ant kernel::[6176841.238154][<ffffffff814e2345>]? page_fault+0x25/0x30...Aug1908:32:38 mybank-ant kernel::[6176841.247969][24673]1801246731280126926068100 java Aug1908:32:38 mybank-ant kernel::[6176841.247971][25084]1801250843756101000 top Aug1908:32:38 mybank-ant kernel::[6176841.247973][25094]1801250942523330100 tail Aug1908:32:38 mybank-ant kernel::[6176841.247975][25098]1801250982523331000 tail Aug1908:32:38 mybank-ant kernel::[6176841.247977][25100]1801251002523330100 tail Aug1908:32:38 mybank-ant kernel::[6176841.247979][25485]1801254852523330100 tail Aug1908:32:38 mybank-ant kernel::[6176841.247981][26055]1801260552523330000 tail Aug1908:32:38 mybank-ant kernel::[6176841.247984][26069]1801260692523330000 tail Aug1908:32:38 mybank-ant kernel::[6176841.247986][26081]1801260812523330000 tail Aug1908:32:38 mybank-ant kernel::[6176841.247988][26147]1801261472523332000 tail Aug1908:32:38 mybank-ant kernel::[6176841.247990]Out of memory:Kill process 24673(java) score 946or sacrifice child Aug1908:32:38 mybank-ant kernel::[6176841.249016]Killed process 24673, UID 1801,(java) total-vm:5120504kB, anon-rss:3703788kB, file-rss:484kB

从上面我们看到了一个堆栈，也就是内核里选择被kill进程的过程，这个过程会对进程进行一系列的计算，每个进程都会给它们计算一个score，这个分数会记录在/proc/<pid>/oom_score里，通常这个分数越高，就越危险，被kill的可能性就越大，下面将内核相关的代码贴出来，有兴趣的可以看看，其中代码注释上也写了挺多相关的东西了：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214

/* * Simple selection loop. We chose the process with the highest * number of 'points'. We expect the caller will lock the tasklist. * * (not docbooked, we don't want this one cluttering up the manual) */ static struct task_struct *select_bad_process(unsigned long *ppoints, struct mem_cgroup *mem) { struct task_struct *p; struct task_struct *chosen = NULL; struct timespec uptime; *ppoints = 0; do_posix_clock_monotonic_gettime(&uptime); for_each_process(p) { unsigned long points; /* * skip kernel threads and tasks which have already released * their mm. */ if (!p->mm) continue; /* skip the init task */ if (is_global_init(p)) continue; if (mem && !task_in_mem_cgroup(p, mem)) continue; /* * This task already has access to memory reserves and is * being killed. Don't allow any other task access to the * memory reserve. * * Note: this may have a chance of deadlock if it gets * blocked waiting for another task which itself is waiting * for memory. Is there a better alternative? */ if (test_tsk_thread_flag(p, TIF_MEMDIE)) return ERR_PTR(-1UL); /* * This is in the process of releasing memory so wait for it * to finish before killing some other task by mistake. * * However, if p is the current task, we allow the 'kill' to * go ahead if it is exiting: this will simply set TIF_MEMDIE, * which will allow it to gain access to memory reserves in * the process of exiting and releasing its resources. * Otherwise we could get an easy OOM deadlock. */ if (p->flags & PF_EXITING) { if (p != current) return ERR_PTR(-1UL); chosen = p; *ppoints = ULONG_MAX; } if (p->signal->oom_adj == OOM_DISABLE) continue; points = badness(p, uptime.tv_sec); if (points > *ppoints || !chosen) { chosen = p; *ppoints = points; } } return chosen; } /** * badness - calculate a numeric value for how bad this task has been * @p: task struct of which task we should calculate * @uptime: current uptime in seconds * * The formula used is relatively simple and documented inline in the * function. The main rationale is that we want to select a good task * to kill when we run out of memory. * * Good in this context means that: * 1) we lose the minimum amount of work done * 2) we recover a large amount of memory * 3) we don't kill anything innocent of eating tons of memory * 4) we want to kill the minimum amount of processes (one) * 5) we try to kill the process the user expects us to kill, this * algorithm has been meticulously tuned to meet the principle * of least surprise ... (be careful when you change it) */ unsigned long badness(struct task_struct *p, unsigned long uptime) { unsigned long points, cpu_time, run_time; struct mm_struct *mm; struct task_struct *child; int oom_adj = p->signal->oom_adj; struct task_cputime task_time; unsigned long utime; unsigned long stime; if (oom_adj == OOM_DISABLE) return 0; task_lock(p); mm = p->mm; if (!mm) { task_unlock(p); return 0; } /* * The memory size of the process is the basis for the badness. */ points = mm->total_vm;/* * After this unlock we can no longer dereference local variable `mm' */ task_unlock(p);/* * swapoff can easily use up all memory, so kill those first. */if(p->flags & PF_OOM_ORIGIN)return ULONG_MAX;/* * Processes which fork a lot of child processes are likely * a good choice. We add half the vmsize of the children if they * have an own mm. This prevents forking servers to flood the * machine with an endless amount of children. In case a single * child is eating the vast majority of memory, adding only half * to the parents will make the child our kill candidate of choice. */ list_for_each_entry(child,&p->children, sibling){ task_lock(child);if(child->mm != mm && child->mm) points += child->mm->total_vm/2+1; task_unlock(child);}/* * CPU time is in tens of seconds and run time is in thousands * of seconds. There is no particular reason for this other than * that it turned out to work very well in practice. */ thread_group_cputime(p,&task_time); utime = cputime_to_jiffies(task_time.utime); stime = cputime_to_jiffies(task_time.stime); cpu_time =(utime + stime)>>(SHIFT_HZ +3);if(uptime >= p->start_time.tv_sec) run_time =(uptime - p->start_time.tv_sec)>>10;else run_time =0;if(cpu_time) points /= int_sqrt(cpu_time);if(run_time) points /= int_sqrt(int_sqrt(run_time));/* * Niced processes are most likely less important, so double * their badness points. */if(task_nice(p)>0) points *=2;/* * Superuser processes are usually more important, so we make it * less likely that we kill those. */if(has_capability_noaudit(p, CAP_SYS_ADMIN)|| has_capability_noaudit(p, CAP_SYS_RESOURCE)) points /=4;/* * We don't want to kill a process with direct hardware access. * Not only could that mess up the hardware, but usually users * tend to only have this flag set on applications they think * of as important. */if(has_capability_noaudit(p, CAP_SYS_RAWIO)) points /=4;/* * If p's nodes don't overlap ours, it may still help to kill p * because p may have allocated or otherwise mapped memory on * this node before. However it will be less likely. */if(!has_intersects_mems_allowed(p)) points /=8;/* * Adjust the score by oom_adj. */if(oom_adj){if(oom_adj >0){if(!points) points =1; points <<= oom_adj;}else points >>=-(oom_adj);}#ifdef DEBUG printk(KERN_DEBUG "OOMkill: task %d (%s) got %lu points\n", p->pid, p->comm, points);#endifreturn points;}

物理内存到底去哪了？

DirectByteBuffer冰山对象？

这是我们查这个问题首先要想到的一个地方，是否是因为什么地方不断创建DirectByteBuffer对象，但是由于没有被回收导致了内存泄露呢，之前有篇文章已经详细介绍了这种特殊对象JVM源码分析之堆外内存完全解读，对阿里内部的童鞋，可以直接使用zprofiler的heap视图里的堆外内存分析功能拿到统计结果，知道后台到底绑定了多少堆外内存还没有被回收：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

object position limit capacity java.nio.DirectByteBuffer @ 0x760afaed0 133 133 6380562 java.nio.DirectByteBuffer @ 0x790d51ae0 0 262144 262144 java.nio.DirectByteBuffer @ 0x790d20b80 133934 133934 262144 java.nio.DirectByteBuffer @ 0x790d20b40 0 262144 262144 java.nio.DirectByteBuffer @ 0x790d20b00 133934 133934 262144 java.nio.DirectByteBuffer @ 0x771ba3608 0 262144 262144 java.nio.DirectByteBuffer @ 0x771ba35c8 133934 133934 262144 java.nio.DirectByteBuffer @ 0x7c5c9e250 0 131072 131072 java.nio.DirectByteBuffer @ 0x7c5c9e210 74670 74670 131072 java.nio.DirectByteBuffer @ 0x7c185cd10 0 131072 131072 java.nio.DirectByteBuffer @ 0x7c185ccd0 98965 98965 131072 java.nio.DirectByteBuffer @ 0x7b181c980 65627 65627 131072 java.nio.DirectByteBuffer @ 0x7a40d6e40 0 131072 131072 java.nio.DirectByteBuffer @ 0x794ac3320 0 131072 131072 java.nio.DirectByteBuffer @ 0x794a7a418 80490 80490 131072 java.nio.DirectByteBuffer @ 0x77279e1d8 0 131072 131072 java.nio.DirectByteBuffer @ 0x77279dde8 65627 65627 131072 java.nio.DirectByteBuffer @ 0x76ea84000 0 131072 131072 java.nio.DirectByteBuffer @ 0x76ea83fc0 82549 82549 131072 java.nio.DirectByteBuffer @ 0x764d8d678 0 0 131072 java.nio.DirectByteBuffer @ 0x764d8d638 0 0 131072 java.nio.DirectByteBuffer @ 0x764d8d5f8 0 0 131072 java.nio.DirectByteBuffer @ 0x761a76340 0 131072 131072 java.nio.DirectByteBuffer @ 0x761a76300 74369 74369 131072 java.nio.DirectByteBuffer @ 0x7607423d0 0 131072 131072 总共: 25 / 875 条目; 还有850条,双击展开 1267762 3826551 12083282

某个动态库里频繁分配？

对于动态库里频繁分配的问题，主要得使用google的perftools工具了，该工具网上介绍挺多的，就不对其用法做详细介绍了，通过该工具我们能得到native方法分配内存的情况，该工具主要利用了unix的一个环境变量LD_PRELOAD，它允许你要加载的动态库优先加载起来，相当于一个Hook了，于是可以针对同一个函数可以选择不同的动态库里的实现了，比如googleperftools就是将malloc方法替换成了tcmalloc的实现，这样就可以跟踪内存分配路径了，得到的效果类似如下：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Total: 1670.0 MB 1616.3 96.8% 96.8% 1616.3 96.8% zcalloc 40.3 2.4% 99.2% 40.3 2.4% os::malloc 9.4 0.6% 99.8% 9.4 0.6% init 1.6 0.1% 99.9% 1.7 0.1% readCEN 1.3 0.1% 99.9% 1.3 0.1% ObjectSynchronizer::omAlloc 0.5 0.0% 100.0% 1591.0 95.3% Java_java_util_zip_Deflater_init 0.1 0.0% 100.0% 0.1 0.0% _dl_allocate_tls 0.1 0.0% 100.0% 0.2 0.0% addMetaName 0.1 0.0% 100.0% 0.2 0.0% allocZip 0.1 0.0% 100.0% 0.1 0.0% instanceKlass::add_dependent_nmethod 0.1 0.0% 100.0% 0.1 0.0% newEntry 0.0 0.0% 100.0% 0.0 0.0% strdup 0.0 0.0% 100.0% 25.8 1.5% Java_java_util_zip_Inflater_init 0.0 0.0% 100.0% 0.0 0.0% growMetaNames 0.0 0.0% 100.0% 0.0 0.0% _dl_new_object 0.0 0.0% 100.0% 0.0 0.0% pthread_cond_wait@GLIBC_2.2.5 0.0 0.0% 100.0% 1.4 0.1% Thread::Thread 0.0 0.0% 100.0% 0.0 0.0% pthread_cond_timedwait@GLIBC_2.2.5 0.0 0.0% 100.0% 0.0 0.0% JLI_MemAlloc 0.0 0.0% 100.0% 0.0 0.0% read_alias_file 0.0 0.0% 100.0% 0.0 0.0% _nl_intern_locale_data 0.0 0.0% 100.0% 0.0 0.0% nss_parse_service_list 0.0 0.0% 100.0% 0.0 0.0% getprotobyname 0.0 0.0% 100.0% 0.0 0.0% getpwuid 0.0 0.0% 100.0% 0.0 0.0% _dl_check_map_versions 0.0 0.0% 100.0% 1590.5 95.2% deflateInit2_

从上面的输出中我们看到了zcalloc函数总共分配了1616.3M的内存，还有Java_java_util_zip_Deflater_init分配了1591.0M内存，deflateInit2_分配了1590.5M，然而总共才分配了1670.0M内存，所以这几个函数肯定是调用者和被调用者的关系：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131

JNIEXPORT jlong JNICALL Java_java_util_zip_Deflater_init(JNIEnv *env, jclass cls, jint level, jint strategy, jboolean nowrap) { z_stream *strm = calloc(1, sizeof(z_stream)); if (strm == 0) { JNU_ThrowOutOfMemoryError(env, 0); return jlong_zero; } else { char *msg; switch (deflateInit2(strm, level, Z_DEFLATED, nowrap ? -MAX_WBITS : MAX_WBITS, DEF_MEM_LEVEL, strategy)) { case Z_OK: return ptr_to_jlong(strm); case Z_MEM_ERROR: free(strm); JNU_ThrowOutOfMemoryError(env, 0); return jlong_zero; case Z_STREAM_ERROR: free(strm); JNU_ThrowIllegalArgumentException(env, 0); return jlong_zero; default: msg = strm->msg; free(strm); JNU_ThrowInternalError(env, msg); return jlong_zero; } } } int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, version, stream_size) z_streamp strm; int level; int method; int windowBits; int memLevel; int strategy; const char *version; int stream_size; { deflate_state *s; int wrap = 1; static const char my_version[] = ZLIB_VERSION; ushf *overlay; /* We overlay pending_buf and d_buf+l_buf. This works since the average * output size for (length,distance) codes is <= 24 bits. */ if (version == Z_NULL || version[0] != my_version[0] || stream_size != sizeof(z_stream)) { return Z_VERSION_ERROR; } if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; if (strm->zalloc == (alloc_func)0) { strm->zalloc = zcalloc; strm->opaque = (voidpf)0; } if (strm->zfree == (free_func)0) strm->zfree = zcfree; #ifdef FASTEST if (level != 0) level = 1; #else if(level == Z_DEFAULT_COMPRESSION) level =6;#endifif(windowBits <0){/* suppress zlib wrapper */ wrap =0; windowBits =-windowBits;}#ifdef GZIP elseif(windowBits >15){ wrap =2;/* write gzip wrapper instead */ windowBits -=16;}#endifif(memLevel <1|| memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || windowBits <8|| windowBits >15|| level <0|| level >9|| strategy <0|| strategy > Z_FIXED){return Z_STREAM_ERROR;}if(windowBits ==8) windowBits =9;/* until 256-byte window bug fixed */ s =(deflate_state *) ZALLOC(strm,1,sizeof(deflate_state));if(s == Z_NULL)return Z_MEM_ERROR; strm->state =(struct internal_state FAR *)s; s->strm = strm; s->wrap = wrap; s->gzhead = Z_NULL; s->w_bits = windowBits; s->w_size =1<< s->w_bits; s->w_mask = s->w_size -1; s->hash_bits = memLevel +7; s->hash_size =1<< s->hash_bits; s->hash_mask = s->hash_size -1; s->hash_shift =((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); s->window =(Bytef*) ZALLOC(strm, s->w_size,2*sizeof(Byte)); s->prev =(Posf*) ZALLOC(strm, s->w_size,sizeof(Pos)); s->head =(Posf*) ZALLOC(strm, s->hash_size,sizeof(Pos)); s->lit_bufsize =1<<(memLevel +6);/* 16K elements by default */ overlay =(ushf *) ZALLOC(strm, s->lit_bufsize,sizeof(ush)+2); s->pending_buf =(uchf *) overlay; s->pending_buf_size =(ulg)s->lit_bufsize *(sizeof(ush)+2L);if(s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || s->pending_buf == Z_NULL){ s->status = FINISH_STATE; strm->msg =(char*)ERR_MSG(Z_MEM_ERROR); deflateEnd (strm);return Z_MEM_ERROR;} s->d_buf = overlay + s->lit_bufsize/sizeof(ush); s->l_buf = s->pending_buf +(1+sizeof(ush))*s->lit_bufsize; s->level = level; s->strategy = strategy; s->method =(Byte)method;return deflateReset(strm);}

上述代码也验证了他们这种关系。

那现在的问题就是找出哪里调用Java_java_util_zip_Deflater_init了，从这方法的命名上知道它是一个java的native方法实现，对应的是java.util.zip.Deflater这个类的init方法，所以要知道init方法哪里被调用了，跟踪调用栈我们会想到btrace工具，但是btrace是通过插桩的方式来实现的，对于native方法是无法插桩的，于是我们看调用它的地方，找到对应的方法，然后进行btrace脚本编写：

1 2 3 4 5 6 7 8 9 10 11 12

import com.sun.btrace.annotations.*; import static com.sun.btrace.BTraceUtils.*; @BTrace public class Test { @OnMethod( clazz="java.util.zip.Deflater", method="<init>" ) public static void onnewThread(int i,boolean b) { jstack(); } }

于是跟踪对应的进程，我们能抓到调用Deflater构造函数的堆栈

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

org.apache.commons.compress.compressors.deflate.DeflateCompressorOutputStream.<init>(DeflateCompressorOutputStream.java:47) com.xxx.unimsg.parse.util.CompressUtil.deflateCompressAndEncode(CompressUtil.java:199) com.xxx.unimsg.parse.util.CompressUtil.compress(CompressUtil.java:80) com.xxx.unimsg.UnifyMessageHelper.compressXml(UnifyMessageHelper.java:65) com.xxx.core.model.utils.UnifyMessageUtil.compressXml(UnifyMessageUtil.java:56) com.xxx.repository.convert.BatchInDetailConvert.convertDO(BatchInDetailConvert.java:57) com.xxx.repository.impl.IncomingDetailRepositoryImpl$1.store(IncomingDetailRepositoryImpl.java:43) com.xxx.repository.helper.IdempotenceHelper.store(IdempotenceHelper.java:27) com.xxx.repository.impl.IncomingDetailRepositoryImpl.store(IncomingDetailRepositoryImpl.java:40) sun.reflect.GeneratedMethodAccessor274.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309) org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183) org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150) com.alipay.finsupport.component.monitor.MethodMonitorInterceptor.invoke(MethodMonitorInterceptor.java:45) org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202) ...

从上面的堆栈我们找出了调用java.util.zip.Deflate.init()的地方

问题解决

上面已经定位了具体的代码了，于是再细致跟踪了下对应的代码，其实并不是代码实现上的问题，而是代码设计上没有考虑到流量很大的场景，当流量很大的时候，不管自己系统是否能承受这么大的压力，都来者不拒，拿到数据就做deflate，而这个过程是需要分配堆外内存的，当量达到一定程度的时候此时会发生oom killer，另外我们在分析过程中发现其实物理内存是有下降的

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

30071.txt: 0.0 0.0% 100.0% 96.7 57.0% Java_java_util_zip_Deflater_init 30071.txt: 0.1 0.0% 99.9% 196.0 72.6% Java_java_util_zip_Deflater_init 30071.txt: 0.1 0.0% 99.9% 290.3 78.5% Java_java_util_zip_Deflater_init 30071.txt: 0.1 0.0% 99.9% 392.7 83.6% Java_java_util_zip_Deflater_init 30071.txt: 0.2 0.0% 99.9% 592.8 88.5% Java_java_util_zip_Deflater_init 30071.txt: 0.2 0.0% 99.9% 700.7 91.0% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 799.1 91.9% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 893.9 92.2% Java_java_util_zip_Deflater_init 30071.txt: 0.0 0.0% 99.9% 114.2 63.7% Java_java_util_zip_Deflater_init 30071.txt: 0.0 0.0% 100.0% 105.1 52.1% Java_java_util_zip_Deflater_init 30071.txt: 0.2 0.0% 99.9% 479.7 87.4% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 782.2 90.1% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 986.9 92.3% Java_java_util_zip_Deflater_init 30071.txt: 0.4 0.0% 99.9% 1086.3 92.9% Java_java_util_zip_Deflater_init 30071.txt: 0.4 0.0% 99.9% 1185.1 93.3% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 941.5 92.1% Java_java_util_zip_Deflater_init 30071.txt: 0.4 0.0% 100.0% 1288.8 94.1% Java_java_util_zip_Deflater_init 30071.txt: 0.5 0.0% 100.0% 1394.8 94.9% Java_java_util_zip_Deflater_init 30071.txt: 0.5 0.0% 100.0% 1492.5 95.1% Java_java_util_zip_Deflater_init 30071.txt: 0.5 0.0% 100.0% 1591.0 95.3% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 874.6 90.0% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 950.7 92.8% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 858.4 92.3% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 818.4 91.9% Java_java_util_zip_Deflater_init 30071.txt: 0.3 0.0% 99.9% 858.7 91.2% Java_java_util_zip_Deflater_init 30071.txt: 0.1 0.0% 99.9% 271.5 77.9% Java_java_util_zip_Deflater_init 30071.txt: 0.4 0.0% 99.9%1260.493.1%Java_java_util_zip_Deflater_init30071.txt:0.30.0%99.9%976.490.6%Java_java_util_zip_Deflater_init

这也就说明了其实代码使用上并没有错，因此建议将deflate放到队列里去做，比如限制队列大小是100，每次最多100个数据可以被deflate，处理一个放进一个，以至于不会被活活撑死。