想起init3下面难看的字符终端，就算加上zhcon，看到熟悉的中文，也未免太单调了。所以还是决定弄一个splash和终端背景。
下面，秀一下我滴成果。
不要以为我只玩vm滴，其实我这个VM server上的兔兔，是自己的机器做的stage4 
嗷嗷。。。
download
开始动工：
1、编译内核
cd linux
make oldconfig
make modules_prepare
把以下各项编译进内核.不要编译成模块，也不要开启 nvidia 或 ATI 选项（我们只要有vesa就可以了）.
编译配置内核，使其支持gensplash，必要的选项如下：（引用了gentoo官方的:) ，其实如果你以前编译了这些模块，这回就表折腾内核了！）
Required Kernel OptionsLinux Kernel Configuration: 2.6 - Required for Non-genkernel & Genkernel users alike
Device Drivers>
Graphics support:>
[*] Support for frame buffer devices
<*> VESA VGA graphics support
VESA driver type (vesafb-tng) —>
(HRESxVRES@FREQ) VESA default mode
# Pick your resolution@freq # Ex: (1024×768@72)
Device Drivers>
Graphics support>
Console display driver support:
[*] Video mode selection support
<*> Framebuffer Console support
Device Drivers>
Graphics support:
[*] Support for the framebuffer splash
Note: The VESA default mode is set as res-bpps@freq, eg. 1280×1024-16@60 (please confirm) Linux Kernel Configuration: If you want to load the initramfs image dynamically at boot — you probably do — enable RAM disk support as well. (Genkernel users must select this option.)
Device Drivers>
Block devices:
<*> RAM disk support (4096) Default RAM disk size (kbytes) (NEW)
[*] Initial RAM disk (initrd) support
Linux Kernel Configuration: If any of these options don’t show up, make sure you didn’t select tileblitting support.
Device Drivers > Graphics support:
[ ] Enable Tile Blitting Support
Linux Kernel Configuration: If you want to get the F2 key working to switch to verbose and silent, you need the option CONFIG_INPUT_EVDEV =y set. It is under Device Drivers > Input Device Support <*>Event Interface
2、创建initramfs图片。
自己修改了两幅图片（也不记得从哪里下载的了，可以搜索Gentoo-Blue-fbsplash）。
emerge -va splashutils splash-themes-gentoo splash-themes-livecd -p
发现系统里面有bootsplash，block了其他的包包，所以
emerge –unmerge bootsplash
emerge -va splashutils splash-themes-gentoo splash-themes-livecd
emerge genkernel
genkernel –gensplash=livecd-2006.1 initrd #这里，我已经替换了/etc/splash/livecd-2006.1里面的相关图片了（爱漂亮！没办法。）
选择主题:
splash_manager –theme=livecd-2006.1 –cmd=set –tty=1
接下来就是修改/boot/grub/grub.conf配置文件了。
title=Gentoo Linux 2.6.19 framebuffer
root (hd0,0)
kernel /vmlinuz splash=silent,fadein,theme:livecd-2006.1 video=vesafb:1024×768-16@60,mtrr,ywrap CONSOLE=/dev/tty1 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3
initrd /initramfs-genkernel-x86-2.6.19-gentoo-r1
不出意外，你一reboot敲下去，重启就可以看到漂亮的splash画面了。
