hj_服务器操作记录-6月

基本信息:

1 服务器配置: CentOS Stream 8 64位 2核8G 1M带宽
2 开放端口: mysql->3306-3309 redis->6379-6380 nacos->8848-8850
jar服务->8000-9999 web->80 443 22
3 连接信息: 账号->root 密码-<xxx
注: 后面的一些挂载目录文件保存等都放在 /horus下 mkdir /hours

安装podman

  • 1 yum install podman -y
  • 2 podman --version --podman version 4.0.2
  • 注: podman近同于docker 操作命令将docker换成podman即可
或者可以设置别名: alias docker=podman

安装mysql8.0.27

  • podman pull mysql:8.0.27 选择docker.io镜像
  • podman run -d -p 3306:3306 --name mysql -e MYSQL_ROOT_PASSWORD=root 镜像ID
  • podman exec -it 容器ID /bin/bash -- 可进入容器
  • mkdir -p /horus/mysql_8.0.27/conf      mkdir /horus/mysql_8.0.27/data
  • podman cp 容器ID:/etc/mysql/. /horus/mysql_8.0.27/conf
  • 修改配置文件 my.cnf 端口改为3307
  • # Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

#
# The MySQL  Server configuration file.
#
# For explanations see
# http://dev.mysql.com/doc/mysql/en/server-system-variables.html

[mysqld]
port            = 3307
pid-file        = /var/run/mysqld/mysqld.pid
socket          = /var/run/mysqld/mysqld.sock
datadir         = /var/lib/mysql
secure-file-priv= NULL

# Custom config should go here
!includedir /etc/mysql/conf.d/
    my.cnf

  • 　　关闭原容器 重新启动  podman stop  podman rm 指令

  • 启动容器
  •  podman run -d --privileged=true --name mysql_8.0.27 -p 3307:3307 -v /horus/mysql_8.0.27/data:/var/lib/mysql -v /horus/mysql_8.0.27/conf:/etc/mysql -e MYSQL_ROOT_PASSWORD=hj2022 3218b38490ce
  • podman run -d --privileged=true --name mysql_8.0.27 \
  • -p 3307:3307 \
  • -v /horus/mysql_8.0.27/data:/var/lib/mysql \
  • -v /horus/mysql_8.0.27/conf:/etc/mysql \
  • -e MYSQL_ROOT_PASSWORD=hj2022  镜像ID
  • Navicat 连接成功 账号: root 密码: hj2022

安装redis6.2.6

  • podman pull redis:6.2.6 选择docker.io版本
  • // 创建2个目录文件,保存redis的数据和配置文件
  • mkdir -p /horus/redis_6.2.6/conf  mkdir /horus/redis_6.2.6/data
  • 在conf目录下创建redis.conf 从redis官方复制一份配置文件进行修改.
  • ################################## NETWORK #####################################
 
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# JUST COMMENT THE FOLLOWING LINE.
# bind 127.0.0.1
# By default protected mode is enabled. You should disable it only if
# you are sure you want clients from other hosts to connect to Redis
# even if no authentication is configured, nor a specific set of interfaces
# are explicitly listed using the "bind" directive.
#
protected-mode no
 
 
# Accept connections on the specified port, default is 6379 (IANA #815344).
# If port 0 is specified Redis will not listen on a TCP socket.
#
port 6380
 
 
# TCP listen() backlog.
#
# In high requests-per-second environments you need an high backlog in order
# to avoid slow clients connections issues. Note that the Linux kernel
# will silently truncate it to the value of /proc/sys/net/core/somaxconn so
# make sure to raise both the value of somaxconn and tcp_max_syn_backlog
# in order to get the desired effect.
#
tcp-backlog 511
 
 
# Close the connection after a client is idle for N seconds (0 to disable)
#
timeout 0
 
 
# A reasonable value for this option is 300 seconds, which is the new
# Redis default starting with Redis 3.2.1.
#
tcp-keepalive 300
 
 
################################# GENERAL #####################################
 
 
# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
#
daemonize no
 
 
# If you run Redis from upstart or systemd, Redis can interact with your
# supervision tree. Options:
# supervised no - no supervision interaction
# supervised upstart - signal upstart by putting Redis into SIGSTOP mode
# supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
# supervised auto - detect upstart or systemd method based on
# UPSTART_JOB or NOTIFY_SOCKET environment variables
# Note: these supervision methods only signal "process is ready."
# They do not enable continuous liveness pings back to your supervisor.
#
supervised no
 
 
# If a pid file is specified, Redis writes it where specified at startup
# and removes it at exit.
#
# When the server runs non daemonized, no pid file is created if none is
# specified in the configuration. When the server is daemonized, the pid file
# is used even if not specified, defaulting to "/var/run/redis.pid".
#
# Creating a pid file is best effort: if Redis is not able to create it
# nothing bad happens, the server will start and run normally.
#
pidfile /var/run/redis_6380.pid
 
 
# Specify the server verbosity level.
# This can be one of:
# debug (a lot of information, useful for development/testing)
# verbose (many rarely useful info, but not a mess like the debug level)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
#
loglevel notice
 
 
# Specify the log file name. Also the empty string can be used to force
# Redis to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
#
logfile ""
 
 
# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
#
databases 16
 
 
# However it is possible to force the pre-4.0 behavior and always show a
# ASCII art logo in startup logs by setting the following option to yes.
#
always-show-logo yes
 
 
################################ SNAPSHOTTING ################################
 
#
# Save the DB on disk:
#
# 这里是用来配置触发 Redis的 RDB 持久化条件,也就是什么时候将内存中的数据保存到硬盘.
# 比如“save m n”.表示m秒内数据集存在n次修改时,自动触发bgsave
# 当然如果你只是用Redis的缓存功能,不需要持久化:
# save ""
#
save 900 1
save 300 10
save 60 10000
 
 
# 默认值为yes.当启用了RDB且最后一次后台保存数据失败,Redis是否停止接收数据.
# 这会让用户意识到数据没有正确持久化到磁盘上,否则没有人会注意到灾难（disaster）发生了.
# 如果Redis重启了,那么又可以重新开始接收数据了
#
stop-writes-on-bgsave-error yes
# 建议设置为 no 否则程序可能就报这个错.<br># MISCONF Redis is configured to save RDB snapshots,<br># but it is currently not able to persist on disk. <br># Commands that may modify the data set are disabled, <br># because this instance is configured to report errors <br># during writes if RDB snapshotting fails <br># (stop-writes-on-bgsave-error option). <br># Please check the Redis logs for details about the RDB error.
 
# 默认值是yes.对于存储到磁盘中的快照,可以设置是否进行压缩存储.
# 如果是的话,redis会采用LZF算法进行压缩.
# 如果你不想消耗CPU来进行压缩的话,可以设置为关闭此功能,但是存储在磁盘上的快照会比较大.
#
rdbcompression yes
 
 
# 默认值是yes.在存储快照后,我们还可以让redis使用CRC64算法来进行数据校验,
# 但是这样做会增加大约10%的性能消耗,如果希望获取到最大的性能提升,可以关闭此功能.
#
rdbchecksum yes
 
 
# 设置快照的文件名,默认是 dump.rdb
#
dbfilename dump.rdb
 
 
# 设置快照文件的存放路径,这个配置项一定是个目录,而不能是文件名.默认是和当前配置文件保存在同一目录.
#
dir ./
 
 
################################# REPLICATION #################################
 
# When a slave loses its connection with the master, or when the replication
# is still in progress, the slave can act in two different ways:
#
# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
# still reply to client requests, possibly with out of date data, or the
# data set may just be empty if this is the first synchronization.
#
# 2) if slave-serve-stale-data is set to 'no' the slave will reply with
# an error "SYNC with master in progress" to all the kind of commands
# but to INFO and SLAVEOF.
#
slave-serve-stale-data yes
 
 
# Note: read only slaves are not designed to be exposed to untrusted clients
# on the internet. It's just a protection layer against misuse of the instance.
# Still a read only slave exports by default all the administrative commands
# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
# security of read only slaves using 'rename-command' to shadow all the
# administrative / dangerous commands.
#
slave-read-only yes
 
 
# With slow disks and fast (large bandwidth) networks, diskless replication
# works better.
#
repl-diskless-sync no
 
 
# The delay is specified in seconds, and by default is 5 seconds. To disable
# it entirely just set it to 0 seconds and the transfer will start ASAP.
#
repl-diskless-sync-delay 5
 
 
# By default we optimize for low latency, but in very high traffic conditions
# or when the master and slaves are many hops away, turning this to "yes" may
# be a good idea.
#
repl-disable-tcp-nodelay no
 
 
# By default the priority is 100.
#
slave-priority 100
 
 
################################## SECURITY ###################################
 
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
requirepass hj2022
 
 
############################# LAZY FREEING ####################################
 
 
# In all the above cases the default is to delete objects in a blocking way,
# like if DEL was called. However you can configure each case specifically
# in order to instead release memory in a non-blocking way like if UNLINK
# was called, using the following configuration directives:
#
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
slave-lazy-flush no
 
 
############################## APPEND ONLY MODE ###############################
 
 
# 默认值为no,也就是说redis 默认使用的是rdb方式持久化,
# 如果想要开启 AOF 持久化方式,需要将 appendonly 修改为 yes.
#
appendonly no
 
# aof文件名,默认是"appendonly.aof"
#
appendfilename "appendonly.aof"
 
 
# aof持久化策略的配置；
#
#　　　　　　no表示不执行fsync,由操作系统保证数据同步到磁盘,速度最快,但是不太安全；
#
#　　　　　　always表示每次写入都执行fsync,以保证数据同步到磁盘,效率很低；
#
#　　　　　　everysec表示每秒执行一次fsync,可能会导致丢失这1s数据.通常选择 everysec ,兼顾安全性和效率
#
appendfsync everysec
 
 
# 在aof重写或者写入rdb文件的时候,会执行大量IO,此时对于everysec和always的aof模式来说,
# 执行fsync会造成阻塞过长时间,no-appendfsync-on-rewrite字段设置为默认设置为no.
# 如果对延迟要求很高的应用,这个字段可以设置为yes,否则还是设置为no,
# 这样对持久化特性来说这是更安全的选择.
# 设置为yes表示rewrite期间对新写操作不fsync,暂时存在内存中,等rewrite完成后再写入,默认为no,建议yes.
# Linux的默认fsync策略是30秒.可能丢失30秒数据.默认值为no.
#
no-appendfsync-on-rewrite no
 
 
# 默认值为100.aof自动重写配置,当目前aof文件大小超过上一次重写的aof文件大小的百分之多少进行重写,
# 即当aof文件增长到一定大小的时候,Redis能够调用bgrewriteaof对日志文件进行重写.
# 当前AOF文件大小是上次日志重写得到AOF文件大小的二倍（设置为100）时,自动启动新的日志重写过程.
#
auto-aof-rewrite-percentage 100
 
 
# 设置允许重写的最小aof文件大小,避免了达到约定百分比但尺寸仍然很小的情况还要重写.
#
auto-aof-rewrite-min-size 64mb
 
 
# aof文件可能在尾部是不完整的,当redis启动的时候,aof文件的数据被载入内存.
# 重启可能发生在redis所在的主机操作系统宕机后,尤其在ext4文件系统没有加上data=ordered选项,
# 出现这种现象 redis宕机或者异常终止不会造成尾部不完整现象,可以选择让redis退出,
# 或者导入尽可能多的数据.如果选择的是yes,当截断的aof文件被导入的时候,
# 会自动发布一个log给客户端然后load.如果是no,用户必须手动redis-check-aof修复AOF文件才可以.
# 默认值为 yes
#
aof-load-truncated yes
 
 
# This is currently turned off by default in order to avoid the surprise
# of a format change, but will at some point be used as the default.
#
aof-use-rdb-preamble no
 
 
# Set it to 0 or a negative value for unlimited execution without warnings.
#
lua-time-limit 5000
 
 
################################## SLOW LOG ###################################
 
 
# The following time is expressed in microseconds, so 1000000 is equivalent
# to one second. Note that a negative number disables the slow log, while
# a value of zero forces the logging of every command.
#
slowlog-log-slower-than 10000
 
 
# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET.
#
slowlog-max-len 128
 
 
################################ LATENCY MONITOR ##############################
 
 
# By default latency monitoring is disabled since it is mostly not needed
# if you don't have latency issues, and collecting data has a performance
# impact, that while very small, can be measured under big load. Latency
# monitoring can easily be enabled at runtime using the command
# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.
#
latency-monitor-threshold 0
 
 
############################# EVENT NOTIFICATION ##############################
 
# By default all notifications are disabled because most users don't need
# this feature and the feature has some overhead. Note that if you don't
# specify at least one of K or E, no events will be delivered.
#
notify-keyspace-events ""
 
 
############################### ADVANCED CONFIG ###############################
 
 
# Hashes are encoded using a memory efficient data structure when they have a
# small number of entries, and the biggest entry does not exceed a given
# threshold. These thresholds can be configured using the following directives.
#
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
 
 
# Positive numbers mean store up to _exactly_ that number of elements
# per list node.
# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
# but if your use case is unique, adjust the settings as necessary.
#
list-max-ziplist-size -2
 
 
# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
# etc.
#
list-compress-depth 0
 
 
# Sets have a special encoding in just one case: when a set is composed
# of just strings that happen to be integers in radix 10 in the range
# of 64 bit signed integers.
# The following configuration setting sets the limit in the size of the
# set in order to use this special memory saving encoding.
#
set-max-intset-entries 512
 
 
# Similarly to hashes and lists, sorted sets are also specially encoded in
# order to save a lot of space. This encoding is only used when the length and
# elements of a sorted set are below the following limits:
#
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
 
 
# The suggested value is ~ 3000 in order to have the benefits of
# the space efficient encoding without slowing down too much PFADD,
# which is O(N) with the sparse encoding. The value can be raised to
# ~ 10000 when CPU is not a concern, but space is, and the data set is
# composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
#
hll-sparse-max-bytes 3000
 
 
# use "activerehashing yes" if you don't have such hard requirements but
# want to free memory asap when possible.
#
activerehashing yes
 
 
# Both the hard or the soft limit can be disabled by setting them to zero.
#
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
 
 
# The range is between 1 and 500, however a value over 100 is usually not
# a good idea. Most users should use the default of 10 and raise this up to
# 100 only in environments where very low latency is required.
#
hz 10
 
 
# When a child rewrites the AOF file, if the following option is enabled
# the file will be fsync-ed every 32 MB of data generated. This is useful
# in order to commit the file to the disk more incrementally and avoid
# big latency spikes.
#
aof-rewrite-incremental-fsync yes
    redis配置文件
  •  podman run -d --privileged=true -p 6380:6380 -v /horus/redis_6.2.6/conf/redis.conf:/etc/redis/redis.conf -v /horus/redis_6.2.6/data:/data --name redis_6.2.6 3c3da61c4be0 /etc/redis/redis.conf --appendonly yes
  • podman run -d --privileged=true -p 6380:6380 \
  • -v /horus/redis_6.2.6/conf/redis.conf:/etc/redis/redis.conf \     映射配置文件
  • -v /horus/redis_6.2.6/data:/data \                                             映射挂载目录
  • --name redis_6.2.6 镜像ID /etc/redis/redis.conf \                     指定配置文件启动redis-server进程
  • --appendonly yes                                                                      开启数据持久化
  • podman exec -it b087c14607bf redis-cli -p 6380

auth hj2022
  •     podman exec -it 容器ID redis-cli -p 6380      进入容器
  •     auth xxx                                                         校验密码
  •      IDEA连接校验ok 

安装nacos v2.1.0

  • podman pull nacos/nacos-server:v2.1.0 选择dockers.io版本
  • podman run -p 8848:8848 --name nacostest -d 镜像id
  • 创建目录用来外挂文件 mkdir -p /horus/nacos_2.1.0/
  • podman cp 容器ID:/home/nacos/logs/ /horus/nacos_2.1.0/
  • podman cp 容器ID:/home/nacos/conf/ /horus/nacos_2.1.0/
  • 删除这个测试容器 podman stop rm 命令 修改配置文件(application.properties),主要是配置mysql连接信息
  • nacos 运行sql脚本文件 nacos-mysql.sql 下载Windows版本的解压后有这文件
  • https://github.com/alibaba/nacos/blob/develop/distribution/conf/nacos-mysql.sql   mysql地址
  • /*
 * Copyright 1999-2018 Alibaba Group Holding Ltd.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = config_info   */
/******************************************/
CREATE TABLE `config_info` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id',
  `data_id` varchar(255) NOT NULL COMMENT 'data_id',
  `group_id` varchar(255) DEFAULT NULL,
  `content` longtext NOT NULL COMMENT 'content',
  `md5` varchar(32) DEFAULT NULL COMMENT 'md5',
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改时间',
  `src_user` text COMMENT 'source user',
  `src_ip` varchar(50) DEFAULT NULL COMMENT 'source ip',
  `app_name` varchar(128) DEFAULT NULL,
  `tenant_id` varchar(128) DEFAULT '' COMMENT '租户字段',
  `c_desc` varchar(256) DEFAULT NULL,
  `c_use` varchar(64) DEFAULT NULL,
  `effect` varchar(64) DEFAULT NULL,
  `type` varchar(64) DEFAULT NULL,
  `c_schema` text,
  `encrypted_data_key` text NOT NULL COMMENT '秘钥',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_configinfo_datagrouptenant` (`data_id`,`group_id`,`tenant_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info';

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = config_info_aggr   */
/******************************************/
CREATE TABLE `config_info_aggr` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id',
  `data_id` varchar(255) NOT NULL COMMENT 'data_id',
  `group_id` varchar(255) NOT NULL COMMENT 'group_id',
  `datum_id` varchar(255) NOT NULL COMMENT 'datum_id',
  `content` longtext NOT NULL COMMENT '内容',
  `gmt_modified` datetime NOT NULL COMMENT '修改时间',
  `app_name` varchar(128) DEFAULT NULL,
  `tenant_id` varchar(128) DEFAULT '' COMMENT '租户字段',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_configinfoaggr_datagrouptenantdatum` (`data_id`,`group_id`,`tenant_id`,`datum_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='增加租户字段';


/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = config_info_beta   */
/******************************************/
CREATE TABLE `config_info_beta` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id',
  `data_id` varchar(255) NOT NULL COMMENT 'data_id',
  `group_id` varchar(128) NOT NULL COMMENT 'group_id',
  `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name',
  `content` longtext NOT NULL COMMENT 'content',
  `beta_ips` varchar(1024) DEFAULT NULL COMMENT 'betaIps',
  `md5` varchar(32) DEFAULT NULL COMMENT 'md5',
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改时间',
  `src_user` text COMMENT 'source user',
  `src_ip` varchar(50) DEFAULT NULL COMMENT 'source ip',
  `tenant_id` varchar(128) DEFAULT '' COMMENT '租户字段',
  `encrypted_data_key` text NOT NULL COMMENT '秘钥',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_configinfobeta_datagrouptenant` (`data_id`,`group_id`,`tenant_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info_beta';

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = config_info_tag   */
/******************************************/
CREATE TABLE `config_info_tag` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id',
  `data_id` varchar(255) NOT NULL COMMENT 'data_id',
  `group_id` varchar(128) NOT NULL COMMENT 'group_id',
  `tenant_id` varchar(128) DEFAULT '' COMMENT 'tenant_id',
  `tag_id` varchar(128) NOT NULL COMMENT 'tag_id',
  `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name',
  `content` longtext NOT NULL COMMENT 'content',
  `md5` varchar(32) DEFAULT NULL COMMENT 'md5',
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改时间',
  `src_user` text COMMENT 'source user',
  `src_ip` varchar(50) DEFAULT NULL COMMENT 'source ip',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_configinfotag_datagrouptenanttag` (`data_id`,`group_id`,`tenant_id`,`tag_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_info_tag';

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = config_tags_relation   */
/******************************************/
CREATE TABLE `config_tags_relation` (
  `id` bigint(20) NOT NULL COMMENT 'id',
  `tag_name` varchar(128) NOT NULL COMMENT 'tag_name',
  `tag_type` varchar(64) DEFAULT NULL COMMENT 'tag_type',
  `data_id` varchar(255) NOT NULL COMMENT 'data_id',
  `group_id` varchar(128) NOT NULL COMMENT 'group_id',
  `tenant_id` varchar(128) DEFAULT '' COMMENT 'tenant_id',
  `nid` bigint(20) NOT NULL AUTO_INCREMENT,
  PRIMARY KEY (`nid`),
  UNIQUE KEY `uk_configtagrelation_configidtag` (`id`,`tag_name`,`tag_type`),
  KEY `idx_tenant_id` (`tenant_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='config_tag_relation';

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = group_capacity   */
/******************************************/
CREATE TABLE `group_capacity` (
  `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT COMMENT '主键ID',
  `group_id` varchar(128) NOT NULL DEFAULT '' COMMENT 'Group ID，空字符表示整个集群',
  `quota` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '配额，0表示使用默认值',
  `usage` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '使用量',
  `max_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '单个配置大小上限，单位为字节，0表示使用默认值',
  `max_aggr_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '聚合子配置最大个数，，0表示使用默认值',
  `max_aggr_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值',
  `max_history_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '最大变更历史数量',
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改时间',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_group_id` (`group_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='集群、各Group容量信息表';

/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = his_config_info   */
/******************************************/
CREATE TABLE `his_config_info` (
  `id` bigint(64) unsigned NOT NULL,
  `nid` bigint(20) unsigned NOT NULL AUTO_INCREMENT,
  `data_id` varchar(255) NOT NULL,
  `group_id` varchar(128) NOT NULL,
  `app_name` varchar(128) DEFAULT NULL COMMENT 'app_name',
  `content` longtext NOT NULL,
  `md5` varchar(32) DEFAULT NULL,
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP,
  `src_user` text,
  `src_ip` varchar(50) DEFAULT NULL,
  `op_type` char(10) DEFAULT NULL,
  `tenant_id` varchar(128) DEFAULT '' COMMENT '租户字段',
  `encrypted_data_key` text NOT NULL COMMENT '秘钥',
  PRIMARY KEY (`nid`),
  KEY `idx_gmt_create` (`gmt_create`),
  KEY `idx_gmt_modified` (`gmt_modified`),
  KEY `idx_did` (`data_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='多租户改造';


/******************************************/
/*   数据库全名 = nacos_config   */
/*   表名称 = tenant_capacity   */
/******************************************/
CREATE TABLE `tenant_capacity` (
  `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT COMMENT '主键ID',
  `tenant_id` varchar(128) NOT NULL DEFAULT '' COMMENT 'Tenant ID',
  `quota` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '配额，0表示使用默认值',
  `usage` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '使用量',
  `max_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '单个配置大小上限，单位为字节，0表示使用默认值',
  `max_aggr_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '聚合子配置最大个数',
  `max_aggr_size` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '单个聚合数据的子配置大小上限，单位为字节，0表示使用默认值',
  `max_history_count` int(10) unsigned NOT NULL DEFAULT '0' COMMENT '最大变更历史数量',
  `gmt_create` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
  `gmt_modified` datetime NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '修改时间',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_tenant_id` (`tenant_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='租户容量信息表';


CREATE TABLE `tenant_info` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT 'id',
  `kp` varchar(128) NOT NULL COMMENT 'kp',
  `tenant_id` varchar(128) default '' COMMENT 'tenant_id',
  `tenant_name` varchar(128) default '' COMMENT 'tenant_name',
  `tenant_desc` varchar(256) DEFAULT NULL COMMENT 'tenant_desc',
  `create_source` varchar(32) DEFAULT NULL COMMENT 'create_source',
  `gmt_create` bigint(20) NOT NULL COMMENT '创建时间',
  `gmt_modified` bigint(20) NOT NULL COMMENT '修改时间',
  PRIMARY KEY (`id`),
  UNIQUE KEY `uk_tenant_info_kptenantid` (`kp`,`tenant_id`),
  KEY `idx_tenant_id` (`tenant_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin COMMENT='tenant_info';

CREATE TABLE `users` (
    `username` varchar(50) NOT NULL PRIMARY KEY,
    `password` varchar(500) NOT NULL,
    `enabled` boolean NOT NULL
);

CREATE TABLE `roles` (
    `username` varchar(50) NOT NULL,
    `role` varchar(50) NOT NULL,
    UNIQUE INDEX `idx_user_role` (`username` ASC, `role` ASC) USING BTREE
);

CREATE TABLE `permissions` (
    `role` varchar(50) NOT NULL,
    `resource` varchar(255) NOT NULL,
    `action` varchar(8) NOT NULL,
    UNIQUE INDEX `uk_role_permission` (`role`,`resource`,`action`) USING BTREE
);

INSERT INTO users (username, password, enabled) VALUES ('nacos', '$2a$10$EuWPZHzz32dJN7jexM34MOeYirDdFAZm2kuWj7VEOJhhZkDrxfvUu', TRUE);

INSERT INTO roles (username, role) VALUES ('nacos', 'ROLE_ADMIN');
    nacos-mysql 
  • # spring
server.servlet.contextPath=${SERVER_SERVLET_CONTEXTPATH:/nacos}
server.contextPath=/nacos
server.port=${NACOS_APPLICATION_PORT:8848}
spring.datasource.platform=${SPRING_DATASOURCE_PLATFORM:mysql}
nacos.cmdb.dumpTaskInterval=3600
nacos.cmdb.eventTaskInterval=10
nacos.cmdb.labelTaskInterval=300
nacos.cmdb.loadDataAtStart=false
db.num=${MYSQL_DATABASE_NUM:1}
db.url.0=jdbc:mysql://120.78.129.105:3307/nacos?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true&useUnicode=true&useSSL=false&serverTimezone=UTC
db.user.0=root
db.password.0=hj2022
### The auth system to use, currently only 'nacos' is supported:
nacos.core.auth.system.type=${NACOS_AUTH_SYSTEM_TYPE:nacos}


### The token expiration in seconds:
nacos.core.auth.default.token.expire.seconds=${NACOS_AUTH_TOKEN_EXPIRE_SECONDS:18000}

### The default token:
nacos.core.auth.default.token.secret.key=${NACOS_AUTH_TOKEN:SecretKey012345678901234567890123456789012345678901234567890123456789}

### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
nacos.core.auth.caching.enabled=${NACOS_AUTH_CACHE_ENABLE:false}
nacos.core.auth.enable.userAgentAuthWhite=${NACOS_AUTH_USER_AGENT_AUTH_WHITE_ENABLE:false}
nacos.core.auth.server.identity.key=${NACOS_AUTH_IDENTITY_KEY:serverIdentity}
nacos.core.auth.server.identity.value=${NACOS_AUTH_IDENTITY_VALUE:security}
server.tomcat.accesslog.enabled=${TOMCAT_ACCESSLOG_ENABLED:false}
server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D
# default current work dir
server.tomcat.basedir=
## spring security config
### turn off security
nacos.security.ignore.urls=${NACOS_SECURITY_IGNORE_URLS:/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-fe/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**}
# metrics for elastic search
management.metrics.export.elastic.enabled=false
management.metrics.export.influx.enabled=false

nacos.naming.distro.taskDispatchThreadCount=10
nacos.naming.distro.taskDispatchPeriod=200
nacos.naming.distro.batchSyncKeyCount=1000
nacos.naming.distro.initDataRatio=0.9
nacos.naming.distro.syncRetryDelay=5000
nacos.naming.data.warmup=true
    application.properties
  • 运行
  •  podman run -d  -e MODE=standalone  -e TIME_ZONE='Asia/Shanghai'  -v /horus/nacos_2.1.0/logs:/home/nacos/logs  -v /horus/nacos_2.1.0/conf:/home/nacos/conf  -p 8848:8848 -p 9848:9848 --name nacos  --restart=always  b0a4aba28604
  • podman run -d \
  • -e MODE=standalone \ // 单机模式
  • -e TIME_ZONE='Asia/Shanghai' \
  • -v /horus/nacos_2.1.0/logs:/home/nacos/logs \
  • -v /horus/nacos_2.1.0/conf:/home/nacos/conf \
  • -p 8848:8848 \
  • -p 9848:9848 \
  • --name nacos \
  • --restart=always \
  • 镜像ID
  • 访问 http://120.78.129.105:8848/nacos 账号密码初始都是: nacos
  • 访问成功 

jdk8安装

  • 下载安装包 (https://www.oracle.com/java/technologies/downloads/#java8)上传服务器
  • tar -zxvf jdk-8u333-linux-x64.tar.gz
  • mkdir /usr/local/jdk
  • cp -r /horus/jdk/jdk1.8.0_333 /usr/local/jdk
  • 设置环境变量,配置 /etc/profile 文件, 文件尾部添加:
  • # JAVA8_HOME
  • export JAVA8_HOME=/usr/local/jdk/jdk1.8.0_333
  • export CLASSPATH=$JAVA8_HOME/lib
  • export PATH=$JAVA8_HOME/bin:$PATH
  • # /etc/profile

# System wide environment and startup programs, for login setup
# Functions and aliases go in /etc/bashrc

# It's NOT a good idea to change this file unless you know what you
# are doing. It's much better to create a custom.sh shell script in
# /etc/profile.d/ to make custom changes to your environment, as this
# will prevent the need for merging in future updates.

pathmunge () {
    case ":${PATH}:" in
        *:"$1":*)
            ;;
        *)
            if [ "$2" = "after" ] ; then
                PATH=$PATH:$1
            else
                PATH=$1:$PATH
            fi
    esac
}


if [ -x /usr/bin/id ]; then
    if [ -z "$EUID" ]; then
        # ksh workaround
        EUID=`/usr/bin/id -u`
        UID=`/usr/bin/id -ru`
    fi
    USER="`/usr/bin/id -un`"
    LOGNAME=$USER
    MAIL="/var/spool/mail/$USER"
fi

# Path manipulation
if [ "$EUID" = "0" ]; then
    pathmunge /usr/sbin
    pathmunge /usr/local/sbin
else
    pathmunge /usr/local/sbin after
    pathmunge /usr/sbin after
fi

HOSTNAME=`/usr/bin/hostname 2>/dev/null`
HISTSIZE=1000
if [ "$HISTCONTROL" = "ignorespace" ] ; then
    export HISTCONTROL=ignoreboth
else
    export HISTCONTROL=ignoredups
fi

export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE HISTCONTROL

# By default, we want umask to get set. This sets it for login shell
# Current threshold for system reserved uid/gids is 200
# You could check uidgid reservation validity in
# /usr/share/doc/setup-*/uidgid file
if [ $UID -gt 199 ] && [ "`/usr/bin/id -gn`" = "`/usr/bin/id -un`" ]; then
    umask 002
else
    umask 022
fi

for i in /etc/profile.d/*.sh /etc/profile.d/sh.local ; do
    if [ -r "$i" ]; then
        if [ "${-#*i}" != "$-" ]; then 
            . "$i"
        else
            . "$i" >/dev/null
        fi
    fi
done

unset i
unset -f pathmunge

# JAVA8_HOME
export JAVA8_HOME=/usr/local/jdk/jdk1.8.0_333
export CLASSPATH=$JAVA8_HOME/lib
export PATH=$JAVA8_HOME/bin:$PATH

if [ -n "${BASH_VERSION-}" ] ; then
        if [ -f /etc/bashrc ] ; then
                # Bash login shells run only /etc/profile
                # Bash non-login shells run only /etc/bashrc
                # Check for double sourcing is done in /etc/bashrc.
                . /etc/bashrc
       fi
fi
    /etc/profile
  • source /etc/profile
  • Java 验证ok 可以使用 jps命令查看运行的jar服务

  • 切记这个文件编辑使用 vi命令 而不要直接点开用finalshell来编辑, 否则其他指令都用不了了...

 

nginx本地容器安装

  • // 依赖包
  • yum install -y make gcc-c++ pcre-devel zlib-devel
  • yum install -y gcc
  • yum install -y pcre pcre-devel
  • yum install -y zlib zlib-devel
  • yum -y install gcc openssl openssl-devel pcre-devel zlib zlib-devel   //这样装依赖包一步到位
  • 下载tar包并上传到服务器.在这目录进行解压
  • tar -zxvf nginx-1.21.6.tar.gz
  • 进入到解压后目录 进行安装
  • ./configure --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module
  • make && make install
  • cd /usr/local/nginx/sbin 目录  ./nginx 启动 ./nginx -s stop 停止 
  •    ./nginx -t 查看配置文件是否正确 ./nginx -s reload 重新加载配置文件
  • 浏览器访问,ok   welcome to nginx!
  • 在 /lib/systemd/system/ 目录下创建 nginx.service 文件 内容见文件
  • systemctl enable nginx
  • systemctl start nginx
  • systemctl status nginx 查看状态
  • 配置文件,html修改目录在 /usr/local/nginx/
  • #user  nobody;
worker_processes  4;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
    include       mime.types;
    default_type  application/octet-stream;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    #gzip  on;


    server {
        listen       443 ssl;
        server_name  test.upleaf.cn;       
        #证书
        ssl_certificate      /horus/ssl/upleaf/7633311_test.upleaf.cn.pem;
        ssl_certificate_key  /horus/ssl/upleaf/7633311_test.upleaf.cn.key;
        
        ssl_session_timeout 5m;
        ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
        ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:HIGH:!aNULL:!MD5:!RC4:!DHE;
        ssl_prefer_server_ciphers on;
        charset utf-8;

       add_header X-Content-Type-Options "nosniff";
        add_header X-XSS-Protection "1";

        error_log  off;

        sendfile off;
        client_max_body_size 100m;
        gzip on;
        gzip_min_length 1k;
        gzip_comp_level 9;
        gzip_types text/plain application/javascript application/x-javascript text/css application/xml text/javascript application/x-httpd-php image/jpeg image/gif image/png;
        gzip_vary on;
        gzip_disable "MSIE [1-6]\.";
        set $realip $remote_addr;
        if ($http_x_forwarded_for ~ "^(\d+\.\d+\.\d+\.\d+)") {
                set $realip $1;
        }
        fastcgi_param REMOTE_ADDR $realip;
        
        location / {
            root /horus/front_end/upleaf/dist;
            index index.html index.htm;
            try_files $uri $uri/ /index.html;
        }

      location /upleaf/api/ {
           add_header 'Access-Control-Allow-Origin' '*';
           add_header 'Access-Control-Allow-Methods' 'POST,GET,OPTIONS';
           add_header 'Access-Control-Allow-Headers' 'Authorization';
           proxy_pass http://120.78.129.105:9083/;
        }

      location /nacos/ {
           add_header 'Access-Control-Allow-Origin' '*';
           add_header 'Access-Control-Allow-Methods' 'POST,GET,OPTIONS';
           add_header 'Access-Control-Allow-Headers' 'Authorization';
           proxy_pass http://120.78.129.105:8848/nacos/;
        }
    }

    server {
        listen       443 ssl;
        server_name test.hauscal.com;       
        ssl_certificate      /horus/ssl/hauscal/7633344_test.hauscal.com.pem;
        ssl_certificate_key  /horus/ssl/hauscal/7633344_test.hauscal.com.key;
        
        ssl_session_timeout 5m;
        ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
        ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:HIGH:!aNULL:!MD5:!RC4:!DHE;
        ssl_prefer_server_ciphers on;
        charset utf-8;

       add_header X-Content-Type-Options "nosniff";
        add_header X-XSS-Protection "1";

        error_log  off;

        sendfile off;
        client_max_body_size 100m;
        gzip on;
        gzip_min_length 1k;
        gzip_comp_level 9;
        gzip_types text/plain application/javascript application/x-javascript text/css application/xml text/javascript application/x-httpd-php image/jpeg image/gif image/png;
        gzip_vary on;
        gzip_disable "MSIE [1-6]\.";
        set $realip $remote_addr;
        if ($http_x_forwarded_for ~ "^(\d+\.\d+\.\d+\.\d+)") {
                set $realip $1;
        }
        fastcgi_param REMOTE_ADDR $realip;
        
        location /hauscal/api/ {
           add_header 'Access-Control-Allow-Origin' '*';
           add_header 'Access-Control-Allow-Methods' 'POST,GET,OPTIONS';
           add_header 'Access-Control-Allow-Headers' 'Authorization';
           proxy_pass http://120.78.129.105:8000/;
        }

      location /nacos/ {
           add_header 'Access-Control-Allow-Origin' '*';
           add_header 'Access-Control-Allow-Methods' 'POST,GET,OPTIONS';
           add_header 'Access-Control-Allow-Headers' 'Authorization';
           proxy_pass http://120.78.129.105:8848/nacos/;
        }
    }

    server{
        listen 80;
        server_name test.upleaf.cn test.hauscal.com;
        rewrite ^(.*)$ https://$host$1 permanent;
    }


}
    nginx.conf参考配置

    配置域名 ssl证书 跑动项目 挂载html目录

 

Docker 容器跑jar服务

  • 上传jar包到指定位置
  • yum -y install lrzsz 装完这个文件上传的 才能使用 rz命令上传文件
  • 制作Dockerfile 文件 touch Dockerfile 配置
  • podman build -f Dockerfile -t hj0606 // 构建xx镜像
  • podman run -d --privileged=true --name hj0606 -p 9083:9083 镜像ID //运行容器
  • ok
  • 也可以直接运行jar包 sh脚本已经编号.
  • ./app.sh start && tail -f app-log.out 直接可运行
  • # 基础镜像使用java
FROM docker.io/library/java:8
# 作者
MAINTAINER hj
# VOLUME 容器挂载目录/tmp。
VOLUME /tmp
# 将jar包添加到容器中并更名为hj.jar
ADD hj-1.1.1.jar hj.jar
# 时区
RUN echo "Asia/Shanghai" > /etc/localtime_bak
# 暴露端口
EXPOSE 9083
# 包前面的add命令把jar复制添加,这个touch命令的作用是修改这个文件的(访问,修改时间)为当前时间,可有可无
RUN bash -c 'touch /hj.jar'
# 运行jar
ENTRYPOINT ["java","-jar","/hj.jar"]
    Dockerfile
    #!/bin/bash
version="1.0.1";

appName=$2
if [ -z $appName ];then
    appName=`ls -t |grep .jar$ |head -n1`
fi

function start()
{
        count=`ps -ef |grep java|grep $appName|wc -l`
        if [ $count != 0 ];then
                echo "Maybe $appName is running, please check it..."
        else
                echo "The $appName is starting..."
                nohup java -Xms512m -Xmx512m -Xmn256m -Xloggc:./gc.log -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=10 -XX:GCLogFileSize=100M -jar ./$appName > ./app-log.out 2>&1 &
        fi
}

function stop()
{
        appId=`ps -ef |grep java|grep $appName|awk '{print $2}'`
        if [ -z $appId ];then
            echo "Maybe $appName not running, please check it..."
        else
        echo "The $appName is stopping..."
        kill -9 $appId
        fi
}

function restart()
{
    # get release version
    releaseApp=`ls -t |grep .jar$ |head -n1`

    # get last version
    lastVersionApp=`ls -t |grep .jar$ |head -n2 |tail -n1`

    appName=$lastVersionApp
    stop
    for i in {5..1}
    do
        echo -n "$i "
        sleep 1
    done
    echo 0

    backup

    appName=$releaseApp
    start
}

function backup()
{
    # get backup version
    backupApp=`ls |grep -wv $releaseApp$ |grep .jar$`

    # create backup dir
    if [ ! -d "backup" ];then
        mkdir backup
    fi

    # backup
    for i in ${backupApp[@]}
    do
        echo "backup" $i
        mv $i backup
    done
}
function status()
{
    appId=`ps -ef |grep java|grep $appName|awk '{print $2}'`
        if [ -z $appId ]
        then
            echo -e "\033[31m Not running \033[0m"
        else
            echo -e "\033[32m Running [$appId] \033[0m"
        fi
}


function usage()
{
    echo "Usage: $0 {start|stop|restart|status|stop -f}"
    echo "Example: $0 start"
    exit 1
}

case $1 in
        start)
        start;;

        stop)
        stop;;

        restart)
        restart;;

        status)
        status;;

        *)
        usage;;
esac
    app.sh

     更正:   /etc/localtime_bak   --> /etc/timezone   这个才能正确使用utf-8时间

    • 如果没有正确配置这个时间  "9999-12-31 23:59:59" 转化的日期  一切打印正常 在插入数据库表的时候 会多8个小时--> '10000-01-01 07:59:59.0',
    • 从而报错 , 但是奇怪的是,new Date() 赋值的字段保存数据库并没有因此多或者少8个小时,日志打印也正常,待继续探究.
  • 如果要使用外部文件打jar镜像 需要类似如下配置:
  • # 基础镜像使用java
FROM docker.io/library/java:8
# 作者
MAINTAINER hj
# VOLUME 容器挂载目录/tmp。
VOLUME /tmp
# 将jar包添加到容器中并更名为upleaf.jar
ADD gateway-1.0-SNAPSHOT.jar gateway.jar
# 时区
RUN echo "Asia/Shanghai" > /etc/localtime_bak
# 暴露端口
EXPOSE 8000
# 包前面的add命令把jar复制添加,这个touch命令的作用是修改这个文件的(访问,修改时间)为当前时间,可有可无
RUN bash -c 'touch /gateway.jar'
# 运行jar
ENTRYPOINT ["java","-jar","/gateway.jar","--spring.config.location=/data/java/config/bootstrap.yml"]
    Dockerfile加载外部配置文件
  • podman build -f Dockerfile -t hj0609 // 构建xx镜像
  • podman run -d --privileged=true  -v /home/hj/gateway/bootstrap.yml:/data/java/config/bootstrap.yml  --name gateway0609 -p 8000:8000  a9a582ad441c
  • 一键部署  删除原容器 镜像 打包镜像 运行容器    // 在同级.sh目录配置好Dockerfile与放好jar包
  • app_name='hjapp'
app_port='8000'

# 停止正在运行的容器
echo '......stop container  hjapp......'
podman stop ${app_name}

# 删除容器
echo '......rm container  hjapp......'
podman rm ${app_name}

# 删除 名称为 app_name 镜像
echo '......rmi none images  hjapp......'
podman rmi `podman images | grep ${app_name} | awk '{print $3}'`

# 构建镜像

podman build -f Dockerfile  -t ${app_name} 

# 重新生成并运行容器
# echo '......start container hjapp......'
 podman run -p ${app_port}:${app_port} -d  --name ${app_name} ${app_name}
podman run -d --privileged=true -v /horus/back_end/hauscal/gateway/bootstrap.yml:/data/java/config/bootstrap.yml --name ${app_name} -p ${app_port}:${app_port}  ${app_name}
# 重新生成并运行容器
echo '......Success hjapp......'
    一键sh
  •   挂载日志文件去外部 
  • # 基础镜像使用java
FROM docker.io/library/java:8
# 作者
MAINTAINER hj
# VOLUME 容器挂载目录/tmp。
VOLUME /tmp
# 将jar包添加到容器中并更名为upleaf.jar
ADD gateway-1.0-SNAPSHOT.jar gateway.jar
# 时区
RUN echo "Asia/Shanghai" > /etc/timezone
# 暴露端口
EXPOSE 8000
# 包前面的add命令把jar复制添加,这个touch命令的作用是修改这个文件的(访问,修改时间)为当前时间,可有可无
RUN bash -c 'touch /gateway.jar'
# 运行jar
ENTRYPOINT ["java","-jar","/gateway.jar","--spring.config.location=/data/java/config/bootstrap.yml"]
    加载外部文件挂载日志Dockerfile
    server:
  port: 8000
spring:
  profiles:
    active: prod
  application:
    name: gateway
  cloud:
    nacos:
      discovery:
        ip: 120.74.183.105
        port: 8848
        server-addr: http://120.74.183.105:8848
      config:
        server-addr: http://120.74.183.105:8848
        file-extension: yml
        shared-configs: # 共享配置
          ${spring.application.name}-${spring.profiles.active}.${spring.cloud.nacos.config.file-extension}
logging:
  level:
    root: INFO
  file:
    name: /data/java/logs/${spring.application.name}.log
    配置日志bootstrap.yml
    app_name='gateway'
app_port='8000'

# 停止正在运行的容器
echo '......stop container  ......'${app_name}
podman stop ${app_name}

# 删除容器
echo '......rm container  ......'${app_name}
podman rm ${app_name}

# 删除 名称为 app_name 镜像
echo '......rmi none images  ......'${app_name}
podman rmi `podman images | grep ${app_name} | awk '{print $3}'`

# 构建镜像

podman build -f Dockerfile  -t ${app_name} 

# 重新生成并运行容器
# echo '......start container gateway......'
podman run -d --privileged=true -v /horus/back_end/hauscal/gateway/bootstrap.yml:/data/java/config/bootstrap.yml -v /horus/back_end/hauscal/logs/:/data/java/logs/ --name ${app_name} -p ${app_port}:${app_port}  ${app_name}
# 重新生成并运行容器
echo '......Success ......'${app_name}
    部署docker.sh
  • over
posted @ 2022-06-02 17:19  独孤~华剑  阅读(112)  评论(1)  编辑  收藏  举报
独孤华剑