C++ 2010
//获取UI值和路径
void CreateNewComponent::GetUIValueandPath()
{
try
{
NewName.clear();
NewNamePath.clear();
selectBodys.clear();
//获取显示部件的全路径
partfullpath1 = basedisplaypart->FullPath();
//theSession->ListingWindow()->WriteLine("显示部件全路径："+partfullpath1);
//分割字符串得到显示部件名
string basedisplaypartName = NameOrPath(partfullpath1.GetLocaleText(), 1);
//theSession->ListingWindow()->WriteLine("显示部件的名字："+basedisplaypartName);
//分割字符串得到模号
int sta = (int)basedisplaypartName.find_first_of("-");//找到工作部件全路径名中的最后一个杠
displaypartMoldNo = basedisplaypartName.substr(0, sta);//分割
//theSession->ListingWindow()->WriteLine("模号："+displaypartMoldNo);
//分割字符串得到显示部件路径
PartPath1 = NameOrPath(partfullpath1.GetLocaleText(), 2);
//theSession->ListingWindow()->WriteLine("显示部件路径："+PartPath1);
//获取模号
PropertyList *stringMoldNoProps = stringMoldNo->GetProperties();
NXString theMoldNo = stringMoldNoProps->GetString("Value");
delete stringMoldNoProps;
stringMoldNoProps = NULL;
//获取工件号
PropertyList *stringNameProps = stringName->GetProperties();
NXString theName = stringNameProps->GetString("Value");
delete stringNameProps;
stringNameProps = NULL;
//获取起始工件号
PropertyList *stringBeginNameProps = stringBeginName->GetProperties();
NXString theBeginName = stringBeginNameProps->GetString("Value");
delete stringBeginNameProps;
stringBeginNameProps = NULL;
//获取选择控件选择的体
selectBodys = selection0->GetSelectedObjects(); //得选择的体
//获取枚举值
int enum0Value = enum0->GetProperties()->GetEnum("Value");
//转换
char NewMoldNo1[256];
sprintf(NewMoldNo1, "%s", theMoldNo.GetLocaleText()); //NXString字符串转char，必须用.GetLocaleText()
string NewMoldNo2 = NewMoldNo1;
//
if ( enum0Value == 0 )
{
//转换
char NewName1[256];
sprintf(NewName1, "-%s", theName.GetLocaleText()); //NXString字符串转char，必须用.GetLocaleText()
string NewName2 = NewName1;
char NewName3[256];
sprintf(NewName3, "\\%s-%s.prt",NewMoldNo2, theName.GetLocaleText()); //NXString字符串转char，必须用.GetLocaleText()
string NewName4 = NewName3;
//新建部件的名字
string NewpartName1 = NewMoldNo2 + NewName2;
NewName.push_back(NewpartName1);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName1 );
//新建部件全路径
string NewNamePath1 = PartPath1 + NewName4;
NewNamePath.push_back(NewNamePath1);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath1);
}
else if ( enum0Value == 1 )
{
string theBeginNamestring1 = theBeginName.GetLocaleText() ;
int start1 = (int)theBeginNamestring1.find_last_of("-");//找到工作部件全路径名中的最后一个杠
int end1 = (int)theBeginNamestring1.find_last_of("");//找到工作部件全路径名中的最后一个空格
string theBeginNamestring2 = theBeginNamestring1.substr(start1+1, end1);//分割
string theBeginNamestring3 = theBeginNamestring1.substr(0, start1+1);//分割
int beginNo = atoi(theBeginNamestring2.c_str());//字符串转为整数型
for ( int i = 0 ; i < selectBodys.size();i++)
{
if ( beginNo < 10 )
{
//转换
char NewName1[256];
sprintf(NewName1, "-%s00%d", theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName2 = NewName1;
char NewName3[256];
sprintf(NewName3, "\\%s-%s00%d.prt",NewMoldNo2, theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName4 = NewName3;
//新建部件的名字
string NewpartName1 = NewMoldNo2 + NewName2;
NewName.push_back(NewpartName1);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName1 );
//新建部件全路径
string NewNamePath1 = PartPath1 + NewName4;
NewNamePath.push_back(NewNamePath1);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath1);
beginNo++;
}
else if ( beginNo >= 10 && beginNo < 100 )
{
//转换
char NewName1[256];
sprintf(NewName1, "-%s0%d", theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName2 = NewName1;
char NewName3[256];
sprintf(NewName3, "\\%s-%s0%d.prt",NewMoldNo2, theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName4 = NewName3;
//新建部件的名字
string NewpartName1 = NewMoldNo2 + NewName2;
NewName.push_back(NewpartName1);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName1 );
//新建部件全路径
string NewNamePath1 = PartPath1 + NewName4;
NewNamePath.push_back(NewNamePath1);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath1);
beginNo++;
}
else if ( beginNo >= 100 )
{
//转换
char NewName1[256];
sprintf(NewName1, "-%s%d", theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName2 = NewName1;
char NewName3[256];
sprintf(NewName3, "\\%s-%s%d.prt",NewMoldNo2, theBeginNamestring3,beginNo); //NXString字符串转char，必须用.GetLocaleText()
string NewName4 = NewName3;
//新建部件的名字
string NewpartName1 = NewMoldNo2 + NewName2;
NewName.push_back(NewpartName1);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName1 );
//新建部件全路径
string NewNamePath1 = PartPath1 + NewName4;
NewNamePath.push_back(NewNamePath1);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath1);
beginNo++;
}
}
}
else if ( enum0Value == 2 )
{
//新建部件的名字
string NewpartName1 = NewMoldNo2 + "-Layout";
NewName.push_back(NewpartName1);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName1 );
//新建部件全路径
char NewName3[256];
sprintf(NewName3, "\\%s-Layout.prt",NewMoldNo2); //NXString字符串转char，必须用.GetLocaleText()
string NewNamePath1 = PartPath1 + NewName3;
NewNamePath.push_back(NewNamePath1);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath1);
//新建部件的名字
string NewpartName2 = NewMoldNo2 + "-Misc";
NewName.push_back(NewpartName2);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName2 );
//新建部件全路径
char NewName4[256];
sprintf(NewName4, "\\%s-Misc.prt",NewMoldNo2); //NXString字符串转char，必须用.GetLocaleText()
string NewNamePath2 = PartPath1 + NewName4;
NewNamePath.push_back(NewNamePath2);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath2);
//新建部件的名字
string NewpartName3 = NewMoldNo2 + "-Ejector";
NewName.push_back(NewpartName3);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName3 );
//新建部件全路径
char NewName5[256];
sprintf(NewName5, "\\%s-Ejector.prt",NewMoldNo2); //NXString字符串转char，必须用.GetLocaleText()
string NewNamePath3 = PartPath1 + NewName5;
NewNamePath.push_back(NewNamePath3);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath3);
//新建部件的名字
string NewpartName4 = NewMoldNo2 + "-Cavity";
NewName.push_back(NewpartName4);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName4 );
//新建部件全路径
char NewName6[256];
sprintf(NewName6, "\\%s-Cavity.prt",NewMoldNo2); //NXString字符串转char，必须用.GetLocaleText()
string NewNamePath4 = PartPath1 + NewName6;
NewNamePath.push_back(NewNamePath4);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath4);
//新建部件的名字
string NewpartName5 = NewMoldNo2 + "-Core";
NewName.push_back(NewpartName5);
//theSession->ListingWindow()->WriteLine("新建部件名：" + NewpartName5 );
//新建部件全路径
char NewName7[256];
sprintf(NewName7, "\\%s-Core.prt",NewMoldNo2); //NXString字符串转char，必须用.GetLocaleText()
string NewNamePath5 = PartPath1 + NewName7;
NewNamePath.push_back(NewNamePath5);
//theSession->ListingWindow()->WriteLine("新建部件全路径：" + NewNamePath5);
}
//遍历文件夹和内存
//filesearch(strDir, 0);
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("获取UI值和路径", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//同名对比
void CreateNewComponent::ToCompareSameName()
{
try
{
//遍历内存
Cylmemory();
//遍历文件夹
filesearch(strDir, 0);
ispartnamecreate = false ;
for(int j = 0 ; j < samepartname1.size();j++)
{
string currPartName2 = samepartname1[j];
for (int Num = 0 ; Num < NewName.size();Num++)
{
string newname3 = NewName [Num];
if (currPartName2 == newname3)
{
ispartnamecreate = true ;
ALLsamenamePart.push_back(newname3);
//theSession->ListingWindow()->WriteLine(newname3+" 部件已存在请重新输入工件名或起始工件名");
//theUI->NXMessageBox()->Show("提示", NXOpen::NXMessageBox::DialogTypeInformation, newname3+"部件已存在");
}
else
{
for ( int i = 0 ; i<samepartname2.size();i++)
{
string currPartName3 = samepartname2[i];
if (currPartName3 == newname3)
{
ispartnamecreate = true ;
ALLsamenamePart.push_back(newname3);
//theSession->ListingWindow()->WriteLine(newname3+" 部件已存在请重新输入工件名或起始工件名");
//theUI->NXMessageBox()->Show("提示", NXOpen::NXMessageBox::DialogTypeInformation, newname3+"部件已存在");
}
}
}
}
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("同名对比", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//遍历内存
void CreateNewComponent::Cylmemory()
{
try
{
//通过迭代器获取内存加载部件的名
samepartname1.clear();
PartCollection *Pc = theSession->Parts();
for ( PartCollection::iterator ite = Pc->begin(); ite !=Pc->end(); ite++)
{
Part *part = (*ite);
NXString partfullpath2 = part ->FullPath();
//theSession->ListingWindow()->WriteLine("部件路径："+partfullpath2);
//分割字符串得到内存加载的部件名字
string currPartName1 = NameOrPath(partfullpath2.GetLocaleText(), 1);
//新建的部件名字和内存加载部件的名字对比，相同就把内存加载部件的名字塞到容器
for (int Num = 0 ; Num < NewName.size();Num++)
{
string newname1 = NewName [Num];
if (currPartName1 == newname1)
{
samepartname1.push_back(currPartName1);
//theSession->ListingWindow()->WriteLine("同名部件："+currPartName1);
}
}
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("遍历内存", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//获取文件名和路径
string CreateNewComponent::NameOrPath(const char* Path, int Type)
{
try
{
//反向找位置，分割字符串(只读取文件夹路径)
string strPath = Path;
string strDir;
int nPos = strPath.find_last_of('\\');
if (string::npos != nPos)
{
strDir = strPath.substr(0, nPos);
}
//分割字符串(只读取part名字+后缀)
//方法2
int pos = strPath.find_last_of('\\');
string s1(strPath.substr(pos + 1));
//分割字符串(只读取part名)
string PartName(s1.substr(0, s1.find(".prt")));
if (Type == 1)
{
return PartName;//返回名字
}
else if (Type == 2)
{
return strDir;//返回文件夹路径
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("获取文件名和路径", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//创建单个部件
void CreateNewComponent::CreateSinglPart()
{
try
{
for ( int i = 0 ; i < NewName.size(); i++)
{
//新建部件的名字
string NewNamestr = NewName[i];
//新建部件全路径
string NewNamePathstr = NewNamePath[i];
//创建部件
FileNew *fileNew1;
fileNew1 = theSession->Parts()->FileNew();
fileNew1->SetTemplateFileName("model-plain-1-mm-template.prt");
fileNew1->SetApplication(FileNewApplicationModeling);
fileNew1->SetUnits(Part::UnitsMillimeters);
fileNew1->SetRelationType("");
fileNew1->SetUsesMasterModel("No");
fileNew1->SetTemplateType(FileNewTemplateTypeItem);
fileNew1->SetNewFileName(NewNamePathstr);//设置新建部件的路径
fileNew1->SetMasterFileName("");
fileNew1->SetUseBlankTemplate(false);
fileNew1->SetMakeDisplayedPart(false);
Assemblies::CreateNewComponentBuilder *createNewComponentBuilder1;
createNewComponentBuilder1 = workPart->AssemblyManager()->CreateNewComponentBuilder();
//createNewComponentBuilder1->SetReferenceSet(Assemblies::CreateNewComponentBuilder::ComponentReferenceSetTypeOther);
createNewComponentBuilder1->SetReferenceSet(Assemblies::CreateNewComponentBuilder::ComponentReferenceSetTypeModel);//引用集设置
createNewComponentBuilder1->SetReferenceSetName("MODEL");//设置引用集名字
createNewComponentBuilder1->SetNewComponentName(NewNamestr);//设置新建部件的名字
//把选择的体塞到objects1
std::vector<DisplayableObject *> objects1(selectBodys.size());
for (int j = 0 ; j < selectBodys.size(); j++ )
{
Body *body1(dynamic_cast<Body *>(NXObjectManager::Get(selectBodys[j]->Tag()))); //选择的目标转换body
objects1[j] = body1;
}
bool added1;
added1 = createNewComponentBuilder1->ObjectForNewComponent()->Add(objects1);
createNewComponentBuilder1->SetNewFile(fileNew1);
NXObject *nXObject1;
nXObject1 = createNewComponentBuilder1->Commit();
//fileNew1->Destroy();
createNewComponentBuilder1->Destroy();
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("创建单个部件", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//批量创建部件
void CreateNewComponent::CreateMultiplePart()
{
try
{
for ( int i = 0 ; i < NewName.size(); i++)
{
//新建部件的名字
string NewNamestr = NewName[i];
//新建部件全路径
string NewNamePathstr = NewNamePath[i];
//创建部件
FileNew *fileNew1;
fileNew1 = theSession->Parts()->FileNew();
fileNew1->SetTemplateFileName("model-plain-1-mm-template.prt");
fileNew1->SetApplication(FileNewApplicationModeling);
fileNew1->SetUnits(Part::UnitsMillimeters);
fileNew1->SetRelationType("");
fileNew1->SetUsesMasterModel("No");
fileNew1->SetTemplateType(FileNewTemplateTypeItem);
fileNew1->SetNewFileName(NewNamePathstr);//设置新建部件的路径
fileNew1->SetMasterFileName("");
fileNew1->SetUseBlankTemplate(false);
fileNew1->SetMakeDisplayedPart(false);
Assemblies::CreateNewComponentBuilder *createNewComponentBuilder1;
createNewComponentBuilder1 = workPart->AssemblyManager()->CreateNewComponentBuilder();
//createNewComponentBuilder1->SetReferenceSet(Assemblies::CreateNewComponentBuilder::ComponentReferenceSetTypeOther);
createNewComponentBuilder1->SetReferenceSet(Assemblies::CreateNewComponentBuilder::ComponentReferenceSetTypeModel);//引用集设置
createNewComponentBuilder1->SetReferenceSetName("MODEL");//设置引用集名字
createNewComponentBuilder1->SetNewComponentName(NewNamestr);//设置新建部件的名字
//把选择的体塞到objects1
std::vector<DisplayableObject *> objects1(1);
Body *body1(dynamic_cast<Body *>(NXObjectManager::Get(selectBodys[i]->Tag()))); //选择的目标转换body
objects1[0] = body1;
bool added1;
added1 = createNewComponentBuilder1->ObjectForNewComponent()->Add(objects1);
createNewComponentBuilder1->SetNewFile(fileNew1);
NXObject *nXObject1;
nXObject1 = createNewComponentBuilder1->Commit();
//fileNew1->Destroy();
createNewComponentBuilder1->Destroy();
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("批量创建部件", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//新模装配树
void CreateNewComponent::CreateNewAssmPart()
{
try
{
//获取UI值和路径
GetUIValueandPath();
for ( int i = 0 ; i < NewName.size(); i++)
{
//新建部件的名字
string NewNamestr = NewName[i];
//新建部件全路径
string NewNamePathstr = NewNamePath[i];
//创建部件
FileNew *fileNew1;
fileNew1 = theSession->Parts()->FileNew();
fileNew1->SetTemplateFileName("model-plain-1-mm-template.prt");
fileNew1->SetApplication(FileNewApplicationModeling);
fileNew1->SetUnits(Part::UnitsMillimeters);
fileNew1->SetRelationType("");
fileNew1->SetUsesMasterModel("No");
fileNew1->SetTemplateType(FileNewTemplateTypeItem);
fileNew1->SetNewFileName(NewNamePathstr);//设置新建部件的路径
fileNew1->SetMasterFileName("");
fileNew1->SetUseBlankTemplate(false);
fileNew1->SetMakeDisplayedPart(false);
NXObject *nXObject1;
nXObject1 = fileNew1->Commit();
fileNew1->Destroy();
//把新文件装配到显示部件
Point3d basePoint1(0.0, 0.0, 0.0);
Matrix3x3 orientation1;
orientation1.Xx = 1.0;
orientation1.Xy = 0.0;
orientation1.Xz = 0.0;
orientation1.Yx = 0.0;
orientation1.Yy = 1.0;
orientation1.Yz = 0.0;
orientation1.Zx = 0.0;
orientation1.Zy = 0.0;
orientation1.Zz = 1.0;
PartLoadStatus *partLoadStatus2;
Assemblies::Component *component1;
component1 = workPart->ComponentAssembly()->AddComponent(NewNamePathstr, "None", NewNamestr, basePoint1, orientation1, -1, &partLoadStatus2, true);
delete partLoadStatus2;
}
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("新模装配树", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
//保存新建部件
void CreateNewComponent::SaveNewPart()
{
try
{
PartSaveStatus *partSaveStatus1;
for ( int i = 0 ; i < NewName.size(); i++)
{
Part *part1(dynamic_cast<Part *>(theSession->Parts()->FindObject(NewName[i])));
string savenewname = NewNamePath[i];
partSaveStatus1 = part1->Save(BasePart::SaveComponentsTrue, BasePart::CloseAfterSaveFalse);
}
delete partSaveStatus1;
//保存当前显示部件
//PartSaveStatus *partSaveStatus2;
//partSaveStatus2 = basedisplaypart->Save(BasePart::SaveComponentsTrue, BasePart::CloseAfterSaveFalse);
//delete partSaveStatus2;
}
catch(exception& ex)
{
//---- Enter your exception handling code here -----
CreateNewComponent::theUI->NXMessageBox()->Show("新模装配树", NXOpen::NXMessageBox::DialogTypeError, ex.what());
}
}
