IPV6双栈
首先配置好IPv4的IP,做好路由。
再配置好IPv6;
在R1 上
配好隧道地址:
int tunnel 0
ipv6 add 2020:a::1/16
no sh
tunnel source 172.16.1.1
tunnel destination 172.16.2.2
tunnel mode ipv6ip
在R3上
配置好隧道
int tunnel 0
ipv6 add 2020:a::2/16
no sh
tunnel source 172.16.1.1
tunnel destination
tunnel mode ipv6ip
然后用OSPF3协议配置IPv6
R1上
conf t
ipv6 router ospf 1
int tunnel 0
ipv6 ospf 1 area 0
int f0/1
ipv6 ospf 1 area 1
在R3上
ipv6 router ospf 1
int tunnel 0
ipv6 ospf 1 area 0
int f0/1
ipv6 ospf 1 area 2
坚持,专注