Maven Surefire Plugin(JUnit篇)

1.maven-surefire-plugin是个什么鬼？

如果你执行过mvn test或者执行其他maven命令时跑了测试用例，你就已经用过maven-surefire-plugin了。maven-surefire-plugin是maven里执行测试用例的插件，不显示配置就会用默认配置。这个插件的surefire:test命令会默认绑定maven执行的test阶段。

maven的生命周期有哪些阶段？

[validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-sources, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, integration-test, post-integration-test, verify, install, deploy]

2.maven-surefire-plugin的使用

如果说maven已经有了maven-surefire-plugin的默认配置，我们还有必要了解maven-surefire-plugin的配置么？答案是肯定的。虽说maven-surefire-plugin有默认配置，但是当需要修改一些测试执行的策略时，就有必要我们去重新配置这个插件了。

2.1.配置JUnit

2.1.1.插件自动匹配

最简单的配置方式就不配置或者是只声明插件。

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>2.19</version>
</plugin>

这个时候maven-surefire-plugin会按照如下逻辑去寻找JUnit的版本并执行测试用例。

if the JUnit version in the project >= 4.7 and the parallel attribute has ANY value
	use junit47 provider
if JUnit >= 4.0 is present
	use junit4 provider
else
	use junit3.8.1

2.1.2.插件手动匹配

当然，如果你明确用的是JUnit4.7及以上版本，可以明确声明：

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>2.19</version>
	<dependencies>
		<dependency>
			<groupId>org.apache.maven.surefire</groupId>
			<artifactId>surefire-junit47</artifactId>
			<version>2.19</version>
		</dependency>
	</dependencies>
</plugin>

JUnit4.0(含)到JUnit4.7(不含)的版本，这样声明:

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>2.19</version>
	<dependencies>
		<dependency>
			<groupId>org.apache.maven.surefire</groupId>
			<artifactId>surefire-junit4</artifactId>
			<version>2.19</version>
		</dependency>
	</dependencies>
</plugin>

JUnit3.8(含)到JUnit4.0(不含)的版本，这样声明:

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>2.19</version>
	<dependencies>
		<dependency>
			<groupId>org.apache.maven.surefire</groupId>
			<artifactId>surefire-junit3</artifactId>
			<version>2.19</version>
		</dependency>
	</dependencies>
</plugin>

JUnit3.8以下的版本surefire不支持。建议大家用最新的JUnit版本，目前是4.12.

<dependencies>
	[...]
    <dependency>
        <groupId>junit</groupId>
        <artifactId>junit</artifactId>
        <version>4.12</version>
        <scope>test</scope>
    </dependency>
	[...]        
</dependencies>

本文的例子我们用的Junit4.12.

2.2.准备测试用例

我们现在准备两个类,一个被测试的类,一个测试用例.目录结构如下

现在我们准备一个简单的类.

package com.qyf404.learn.maven;

public class App {
    public int add(int a, int b) {
        return a + b;
    }
    public int subtract(int a, int b) {
        return a - b;
    }
}

再创建一个测试用例.

package com.qyf404.learn.maven;

import org.junit.After;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;

public class AppTest {
    private App app;
    @Before
    public void setUp() {
        app = new App();
    }
    @Test
    public void testAdd() throws InterruptedException {
        int a = 1;
        int b = 2;
        int result = app.add(a, b);
        Assert.assertEquals(a + b, result);
    }
    @Test
    public void testSubtract() throws InterruptedException {
        int a = 1;
        int b = 2;
        int result = app.subtract(a, b);
        Assert.assertEquals(a - b, result);
    }
    @After
    public void tearDown() throws Exception {
    }
}

2.3.用maven执行测试用例

用maven执行测试用例很简单,直接运行mvn test就可以.一般我们执行maven打包命令mvn package前maven会默认执行test命令.

qyfmac$ mvn test
[INFO] Scanning for projects...
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building learn-maven 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ learn-maven ---
[WARNING] Using platform encoding (UTF-8 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory /Users/qyfmac/git/learn-maven/src/main/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ learn-maven ---
[INFO] Changes detected - recompiling the module!
[WARNING] File encoding has not been set, using platform encoding UTF-8, i.e. build is platform dependent!
[INFO] Compiling 1 source file to /Users/qyfmac/git/learn-maven/target/classes
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ learn-maven ---
[WARNING] Using platform encoding (UTF-8 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory /Users/qyfmac/git/learn-maven/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ learn-maven ---
[INFO] Changes detected - recompiling the module!
[WARNING] File encoding has not been set, using platform encoding UTF-8, i.e. build is platform dependent!
[INFO] Compiling 2 source files to /Users/qyfmac/git/learn-maven/target/test-classes
[INFO] 
[INFO] --- maven-surefire-plugin:2.19:test (default-test) @ learn-maven ---
[WARNING] The parameter forkMode is deprecated since version 2.14. Use forkCount and reuseForks instead.
[INFO] Surefire report directory: /Users/qyfmac/git/learn-maven/target/surefire-reports
[INFO] Using configured provider org.apache.maven.surefire.junit4.JUnit4Provider

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running com.qyf404.learn.maven.AppTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.003 sec - in com.qyf404.learn.maven.AppTest

Results :

Tests run: 2, Failures: 0, Errors: 0, Skipped: 0

[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 2.622 s
[INFO] Finished at: 2015-12-01T11:36:04+08:00
[INFO] Final Memory: 14M/228M
[INFO] ------------------------------------------------------------------------
qyfmac$

其实我们会发现关键内容还是JUnit的东西,maven只是作为一个调用器调用了一下这些测试用例.

3.进阶

后面让我们来研究一下maven-surefire-plugin这个插件更多的知识,这些多数都是和配置相关的.

3.1.跳过测试用例

在工作中,很多情况下我们打包是不想执行测试用例的,可能是测试用例不完事,或是测试用例会影响数据库数据.跳过测试用例执行过程有三个种方法.

3.1.1.在configuration中声明

在插件的configuration配置中声明跳过测试用例

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>2.19</version>
    <dependencies>
        <dependency>
            <groupId>org.apache.maven.surefire</groupId>
            <artifactId>surefire-junit47</artifactId>
            <version>2.19</version>
        </dependency>
    </dependencies>
    <configuration>
        <skipTests>true</skipTests>
    </configuration>
</plugin>

3.1.2.在properties中声明

在properties配置中声明跳过测试用例

<properties>
    <maven.test.skip>true</maven.test.skip>
</properties>

或

<properties>
    <skipTests>true</skipTests>
</properties>

3.1.3.在执行命令中声明

在执行maven命令时可以声明跳过测试用例

qyfmac$ mvn test -Dmaven.test.skip=true

或

qyfmac$ mvn test -DskipTests=true

3.1.4.跳过测试用例优先级排序

首先分两种情况,一种是配置skipTests,一种是配置maven.test.skip(真要命,声明位置就三处了,还搞出两个变量名,一共就是5中情况).

  • 如果是配置skipTests, configuration的配置优先级最高,命令中得配置次之, properties的配置最低.

  • 即configuration > 命令 > properties

  • 如果是配置maven.test.skip,命令中得配置优先级最高, properties的配置最低.
    即命令 > properties

  • skipTests和maven.test.skip有一个被设置成了true,则跳过测试用例.
    即skipTests||maven.test.skip决定是否跳过测试用例执行.

3.2.maven命令执行一个测试用例

很多情况下我们写完一个测试用例后,想马上运行一下,看看执行情况.如果用IDE开发,里面一般都有直接运行一个测试用例的方法.但是如果用maven命令达到同样的效果,就需要加些命令参数了.

比如我们现在再加一个测试用例App2Test.java.

package com.qyf404.learn.maven;

import org.junit.After;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.junit.runners.JUnit4;

@RunWith(JUnit4.class)
public class App2Test {
    private App app;
    @Before
    public void setUp() {
        app = new App();
    }
    @Test
    public void testAdd() throws InterruptedException {
        int a = 1;
        int b = 2;
        int result = app.add(a, b);
        Thread.currentThread().sleep(1000);
        Assert.assertEquals(a + b, result);
    }
    @After
    public void tearDown() throws Exception {
    }

}

直接运行 mvn test是这样的,它执行了全部测试用例.

qyfmac$ mvn test
[INFO] Scanning for projects...
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building learn-maven 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------

...

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running com.qyf404.learn.maven.App2Test
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 1.004 sec - in com.qyf404.learn.maven.App2Test
Running com.qyf404.learn.maven.AppTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0 sec - in com.qyf404.learn.maven.AppTest

Results :

Tests run: 3, Failures: 0, Errors: 0, Skipped: 0

[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 2.773 s
[INFO] Finished at: 2015-12-01T14:57:00+08:00
[INFO] Final Memory: 9M/156M
[INFO] ------------------------------------------------------------------------

现在我们用命令mvn test -Dtest=App2Test指定执行App2Test.

qyfmac$ mvn test -Dtest=App2Test
[INFO] Scanning for projects...
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building learn-maven 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------

...

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running com.qyf404.learn.maven.App2Test
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 1.003 sec - in com.qyf404.learn.maven.App2Test

Results :

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0

[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.061 s
[INFO] Finished at: 2015-12-01T14:58:59+08:00
[INFO] Final Memory: 9M/156M
[INFO] ------------------------------------------------------------------------

-Dtest的参数是可以用表达式的.

  • 比如执行多个测试用例可以用逗号分开 mvn test -Dtest=App2Test,AppTest.

  • 也可以用ant风格的路径表达式mvn test -Dtest=*2Test,mvn test -Dtest=???2Test.

  • 甚至指定具体的测试方法mvn test -Dtest=*Test#testAdd.

  • 指定具体包里的测试用例mvn test -Dtest=com/qyf404/learn/maven/*.

3.3.测试用例的包含与例外配置

上面说了,在执行命令时可以指定执行哪个或哪些测试用例,其实在pom.xml里也是可以配置的.
比如打包时执行测试用例AppTest,不执行App2Test,可以这么配置.

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>2.19</version>
    <dependencies>
        <dependency>
            <groupId>org.apache.maven.surefire</groupId>
            <artifactId>surefire-junit47</artifactId>
            <version>2.19</version>
        </dependency>
    </dependencies>
    <configuration>
        <!--配置是否跳过测试用例执行-->
        <!--<skipTests>true</skipTests>-->
        <includes>
            <include>**/AppTest.java</include>
        </includes>
        <excludes>
            <exclude>**/App2Test.java</exclude>
        </excludes>
    </configuration>
</plugin>

<include>和<exclude>里的配置方式和-Dtest后面的一样可以配置表达式:

  • 指定具体类<include>AppTest</include>.

  • 指定具体类<include>AppTest.java</include>.

  • 指定具体类<include>AppTest.class</include>.

  • 指定具体类<include>com/qyf404/learn/maven/AppTest.class</include>.

  • 指定具体类<include>com/qyf404/learn/maven/AppTest.class,App2Test</include>.

  • 叹号[!]表示否定<include>!*2Test.class</include>.

  • 使用ant风格的路径表达式<include>**/*Test</include>.

  • 使用ant风格的路径表达式<include>**/???Test</include>.

  • 更复杂的%regex[expr]表达式<include>%regex[com.qyf404.learn.maven.*Test.class]</include>.

  • 更复杂的%regex[expr]表达式<include>%regex[com.qyf404.*.*Test.class]</include>.

  • 更复杂的%regex[expr]表达式<include>%regex[com.qyf404.[learn|test].*Test.class]</include>,中间的方括号表示或的概念,即learn或test的情况.

  • 更复杂的%regex[expr]表达式<include>!%regex[com.qyf404.*.*2Test.class]</include>,这里面的叹号表示否定,即包含不符合该表达式的测试用例.

  • 更复杂的%regex[expr]表达式<include>%regex[.*2Test.class]</include>,这种配置方式忽略了包前缀,可以理解成倒着匹配全类名.

  • 更复杂的%regex[expr]表达式里最好不要有问号[?],而且匹配的是类的全类名.

  • 不可以指定具体方法,这种配置是错误的<include>*Test#testAdd</include>.

  • 不可以指定java文件在%regex[expr]里具体方法,这种配置是错误的<include>%regex[com.qyf404.learn.maven.*Test.java]</include>.

  • 如果同时配置了<include>和<exclude>,最终执行的测试用例是二者的交集.

3.4.分组执行测试用例

上面我们说了,可以配置<include>这些信息来控制执行哪些测试用例,但是JUnit里有个注解@Category可以对测试用例组分组标记,而用maven执行测试用例时,我们也可以根据这个注解的标记,来确定执行哪组测试用例.

比如我们的测试用例是这样的:

package com.qyf404.learn.maven;

import org.junit.After;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
import org.junit.experimental.categories.Category;


public class AppTest {
    private App app;
    @Before
    public void setUp() {
        app = new App();
    }
    @Test
    @Category(com.qyf404.learn.maven.FastTests.class)
    public void testAdd() throws InterruptedException {
        int a = 1;
        int b = 2;
        int result = app.add(a, b);
        System.out.println("---" + Thread.currentThread().getName());
        Assert.assertEquals(a + b, result);
    }
    @Test()
    @Category(com.qyf404.learn.maven.SlowTests.class)
    public void testSubtract() throws InterruptedException {
        int a = 1;
        int b = 2;
        int result = app.subtract(a, b);
        System.out.println("---" + Thread.currentThread().getName());
        Assert.assertEquals(a - b, result);
    }
    @After
    public void tearDown() throws Exception {
    }

}

pom.xml里这么配置:

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>2.19</version>
    <configuration>
        <groups>com.qyf404.learn.maven.SlowTests</groups>
    </configuration>
</plugin>

在执行mvn test时,则只执行标记@Category(com.qyf404.learn.maven.SlowTests.class)的测试用例.

3.5.若有测试执行失败则跳过其他测试

在打包时,默认情况会执行全部测试用例,然后给出一个执行的统计结果,如下所示:

Results :

Tests run: 3, Failures: 1, Errors: 0, Skipped: 0

很多情况下我们希望测试用例没有失败的才能打包,如果出现打包失败,需要立刻停止执行其他测试用例.为满足这个要求,我们需要增加一些配置设定.

<configuration>
    <skipAfterFailureCount>1</skipAfterFailureCount>
</configuration>

里面的数字1表示当有一个测试用例执行失败或发生异常时,跳过后续的其他测试用例.这个数字其实只要是一个大于零的数就可以.表达的意思就是当有N个测试用例执行失败或异常时,跳过后续的其他测试用例.

3.6.重新运行失败的测试用例

注意：仅JUnit 4.x支持此功能。

当我们的一个测试用例测试的是一个远程服务,在某些情况下可能由于环境问题(比如网络)导致测试用例执行失败,但这并不是程序问题.换句话说,当一个测试用例执行N次,有一次执行成功就认为成功.这个时候我们就需要配置一个参数,运行执行失败的此时用例重新执行.

<configuration>
    <rerunFailingTestsCount>2</rerunFailingTestsCount>
</configuration>

里面的数字2表示当某个测试用例执行失败以后,还可以重新执行2次,有一次执行成功就认为测试用例执行成功.里面的2只要是一个大于零的整数就可以,表示重试次数.如果发生重试,在maven的执行报告中会多一个Flakes.

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Running com.qyf404.learn.maven.App2Test
Tests run: 3, Failures: 2, Errors: 0, Skipped: 0, Time elapsed: 3.023 sec <<< FAILURE! - in com.qyf404.learn.maven.App2Test
testAdd(com.qyf404.learn.maven.App2Test)  Time elapsed: 1.012 sec  <<< FAILURE!
java.lang.AssertionError: expected:<2> but was:<3>
        at com.qyf404.learn.maven.App2Test.testAdd(App2Test.java:32)

testAdd(com.qyf404.learn.maven.App2Test)  Time elapsed: 1.006 sec  <<< FAILURE!
java.lang.AssertionError: expected:<2> but was:<3>
        at com.qyf404.learn.maven.App2Test.testAdd(App2Test.java:32)

Running com.qyf404.learn.maven.AppTest
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0 sec - in com.qyf404.learn.maven.AppTest

Results :

Flaked tests: 
com.qyf404.learn.maven.App2Test.testAdd(com.qyf404.learn.maven.App2Test)
  Run 1: App2Test.testAdd:32 expected:<2> but was:<3>
  Run 2: App2Test.testAdd:32 expected:<2> but was:<3>
  Run 3: PASS


Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Flakes: 1

3.7.Debugging Tests

一般情况我们可以在IDE中直接执行测试用例,有时候会出现这种情况,IED中直接执行测试用例是没问题的,但是用maven命令打包时就执行失败了.我们可以在命令中加入-X或--debug来打印更多的日志信息来排查问题.但也可以开启JVM的调试端口来远程debug.

3.7.1.以调试模式执行maven命令

执行maven命令mvn -Dmaven.surefire.debug test以开启调试模式.当然也可以用完整的命令来指定端口

mvn -Dmaven.surefire.debug="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=5005 -Xnoagent -Djava.compiler=NONE" test

命令执行后是这个样子:

qyfmac$ mvn -Dmaven.surefire.debug test
[INFO] Scanning for projects...
[INFO]                                                                         
[INFO] ------------------------------------------------------------------------
[INFO] Building learn-maven 1.0-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] 
[INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ learn-maven ---
[WARNING] Using platform encoding (UTF-8 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory /Users/qyfmac/git/learn-maven/src/main/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ learn-maven ---
[INFO] Nothing to compile - all classes are up to date
[INFO] 
[INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ learn-maven ---
[WARNING] Using platform encoding (UTF-8 actually) to copy filtered resources, i.e. build is platform dependent!
[INFO] skip non existing resourceDirectory /Users/qyfmac/git/learn-maven/src/test/resources
[INFO] 
[INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ learn-maven ---
[INFO] Nothing to compile - all classes are up to date
[INFO] 
[INFO] --- maven-surefire-plugin:2.19:test (default-test) @ learn-maven ---

-------------------------------------------------------
 T E S T S
-------------------------------------------------------
Listening for transport dt_socket at address: 5005

后面我们就需要根据这个5005端口去启动本地源码了.

3.7.2.使用IDE远程调试

开始调试前需要先配置IDE,我以idea为例说明如何配置.

  1. 在右上角选择Edit Configurations....
  2. 在打开的对话框中选择左上角的加号,然后选择Remote.
  3. 配置远程调试的参数,主要就是改个名字和端口,其他的配置一般不需要修改.设定好后点保存.
  4. 在要debug得测试用例上设置一个断点.
  5. 选择刚才设置好的配置启动远程调试.
  6. 开始debug你的程序吧.

3.8.并发执行测试用例

如果测试用例很多,而且并行执行时不会互相影响,这时我们可以配置一个线程数来加快测试用例的执行效率.

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>2.19</version>
	<configuration>
		<parallel>methods</parallel>
		<threadCount>10</threadCount>
	</configuration>
</plugin>

3.9.查看测试报告

在执行完mvn test后,会在target目录下生成测试报告
一共两个文件,txt文件记录了汇总信息,xml文件里记录了测试用例执行的环境和执行情况,而且方便程序解析展现.

txt文件内容:

-------------------------------------------------------------------------------
Test set: com.qyf404.learn.maven.AppTest
-------------------------------------------------------------------------------
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.001 sec - in com.qyf404.learn.maven.AppTest

xml文件内容:

<?xml version="1.0" encoding="UTF-8"?>
<testsuite xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="https://maven.apache.org/surefire/maven-surefire-plugin/xsd/surefire-test-report.xsd" name="com.qyf404.learn.maven.AppTest" time="0.001" tests="1" errors="0" skipped="0" failures="0">
  <properties>
    <property name="java.runtime.name" value="Java(TM) SE Runtime Environment"/>
    <property name="sun.boot.library.path" value="/Library/Java/JavaVirtualMachines/jdk1.7.0_75.jdk/Contents/Home/jre/lib"/>
    <property name="java.vm.version" value="24.75-b04"/>
    <property name="gopherProxySet" value="false"/>
    ...
  </properties>
  <testcase name="testAdd" classname="com.qyf404.learn.maven.AppTest" time="0.001"/>
</testsuite>

结语

写了这么多,基本上把maven-surefire-plugin这个插件常用的都介绍了.但是maven-surefire-plugin没介绍的远比这些多,看看它的配置项就知道了.

再加上依据测试结果展现的测试报告就更多了.如果想更加深入了解可以到官网学习.

示例代码github地址: https://github.com/qyf404/learn-maven/tree/maven-surefire-plugin.

参考

http://maven.apache.org/surefire/maven-surefire-plugin

pdf文件下载:http://pan.baidu.com/s/1c1corG8

https://www.cnblogs.com/qyf404/p/5013694.html

posted @ 2020-04-21 14:52  HkGov  阅读(487)  评论(0)  编辑  收藏  举报