从网上找了个ArcGIS 10的全功能破解
win7 测试可用.
也可从此处下载全部所需文件. http://u.115.com/file/f895d6fa91
贴在这里.
直接转载原博客的说明:
http://lightgis.com/2010/the-truly-crack-arcgis-10-with-all-modles.html
----------------------------以下转载自lightGIS.com---------------------------------
不敢发呢 刚捣鼓出来 过两天发上来 先上图 证明下···· 全模块哦
----------------------------------------------------------2010.9.29 update-----------------------------------------------------------------
实在不好意思 这两天小忙了下 囧···
声明下···
发的破解是别人的 所以不关我事 我只是收集到的 然后发布到自己的站上以免哪天系统崩溃了找不着···
我有正版的 只是要用狗 很麻烦 所以先前我只是为了使用方便做了些XX 大家也看到了 我并未发布过
----------------------------------------------------------屁话结束---------------------------------------------------------------------
32位系统的破解肯定是有用的 我已经成功装了4、5台了 ;
64位的一直没机会试呢 所以你装成功了请回到这里来向大家报告下 呵呵
下载地址在本文结束的地方····
附上详细的XX步骤(中英文):
0.there is two versions,X86 and X64.make sure it's meet your own OS type.if your OS is X86,the following steps is pointed to X86 folder,as well as the X64 ;
1.Install ArcGIS 10.0 License Manager along with ArcGIS 10.0 Desktop,after installed stop the service with "License Server Administrator" tool ;
2.copy all files (but not "AfCore.dll") into "%PROGRAMFILES%\ArcGIS\License10.0\bin";
3.run "float.reg"
4.copy "AfCore.dll" to "%PROGRAMFILES%\ArcGIS\Desktop10.0\bin";
5.start LMTools.exe which is in "%PROGRAMFILES%\ArcGIS\License10.0\bin";
6.switch to "Service/License file" and select "Configuration using Services";
7.switch to "Config Services";
8.add "ArcGIS v10" into "Service Name";
9."Browse" to location of "lmgrd.exe" in "Path to the lmgrd.exe file";
10."Browse" to location of "37102011.dat" in "Path to the license file";
11.set a debug file anywhere on your computer;
12.press checkboxes "Use Services" and "Start Server at Power Up";
13.press button "Save Service";
14.switch to "Start/Stop/Reread" ;
15.press "Start Server";
16.press "ReRead License File";
17.start ArcGIS;
0.有2个版本的破解,如果你是X86的系统,下面所有的步骤都是针对X86文件夹的;X64同理;
1.安装ArcGIS 10.0 安装包里自带的ArcGIS 10.0 License Manager,安装完之后立刻停掉服务(很重要);
2.拷贝X86/X64文件夹的除AfCore.dll之外的全部文件到"%PROGRAMFILES%\ArcGIS\License10.0\bin"文件夹内,覆盖之;
3.双击float.reg,合并注册表信息;
4.拷贝AfCore.dll到"%PROGRAMFILES%\ArcGIS\Desktop10.0\bin";
5.双击"%PROGRAMFILES%\ArcGIS\License10.0\bin"文件夹内的 LMTools.exe;
6.在 "Service/License file"标签页下选择"Configuration using Services";
7.切换到"Config Services";
8.随便起个名字,比如“ArcGIS v10”在"Service Name"栏中;
9.点“Browse”,切换到lmgrd.exe文件所在位置,一般应该是在"%PROGRAMFILES%\ArcGIS\License10.0\bin";
10.和第9步一样,切换到37102011.dat文件所在位置,也应该是在"%PROGRAMFILES%\ArcGIS\License10.0\bin";
11.debug文件可以是任何地方的文档(可选操作,建议默认位置);
12.选中"Use Services"及"Start Server at Power Up";
13.保存服务;
14.切换到"Start/Stop/Reread" 标签页;
15.点击启动服务;
16.点击"ReRead License File"(可选操作,建议reread下)
17.现在可以启动arcgis了。
18.祝顺利 (看到http://lightgis.com上有什么感兴趣的广告 可别不好意思点击下哦 http://lightgis.com 上大部分广告都是和GIS RS相关的的 或许哪个就对你有用呢 ;-)
Hints:
01. You might have installed ArcGIS to another directory.
You then need to change the paths mentioned in Part A and Part B.
02. If ARCGIS.exe doesn't work for you (instabilities etc.), simply choose the one
from directory "arc_alternative) and copy into the path of Part A, point 02.
Copyright:
01. License-file and ARCGIS.exe were created by Team TBE.
02. Alternative ARCGIS.exe was created by istigatore from LAVTeam.
03. AfCore.dll was patched by DJX.
04. 此文档(how to .txt)是由lightgis.com参照TBE9.3版本并根据自己的亲自操作总结的。