imx6 framebuffer 分析
分析imx6 framebuffer设备和驱动的注册过程。
Tony Liu, 2016-8-31, Shenzhen
相关文件：
arch/arm/mach-mx6/board-mx6q_sabresd.c
kernel/video/mxc/mxc_ipuv3_fb.c
mm/memblock.c |
drivers/video/fbmem.c |
设备注册
MACHINE_START(MX6Q_SABRESD, "Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board")
/* Maintainer: Freescale Semiconductor, Inc. */
.boot_params = MX6_PHYS_OFFSET + 0x100,
.fixup = fixup_mxc_board, --------------+ //读取uboot bootargs中关于framebufer的参数
.map_io = mx6_map_io, |
.init_irq = mx6_init_irq, |
.init_machine = mx6_sabresd_board_init, ---------------------------------------------+ //设备初始化
.timer = &mx6_sabresd_timer, | |
.reserve = mx6q_sabresd_reserve, -----------------------------------+ | //framebuffer内存保留
MACHINE_END | | |
| | |
//读取bootargs中的参数 V | |
static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags, | |
char **cmdline, struct meminfo *mi) | |
{ | |
char *str; | |
struct tag *t; | |
int i = 0; | |
struct ipuv3_fb_platform_data *pdata_fb = sabresd_fb_data; | |
| |
for_each_tag(t, tags) { | |
if (t->hdr.tag == ATAG_CMDLINE) { | |
str = t->u.cmdline.cmdline; | |
str = strstr(str, "fbmem="); | |
if (str != NULL) { | |
str += 6; | |
pdata_fb[i++].res_size[0] = memparse(str, &str); | |
while (*str == ',' && | |
i < ARRAY_SIZE(sabresd_fb_data)) { | |
str++; | |
pdata_fb[i++].res_size[0] = memparse(str, &str); | |
} | |
} | |
/* ION reserved memory */ | |
str = t->u.cmdline.cmdline; | |
str = strstr(str, "ionmem="); | |
if (str != NULL) { | |
str += 7; | |
imx_ion_data.heaps[0].size = memparse(str, &str); | |
} | |
/* Primary framebuffer base address */ | |
str = t->u.cmdline.cmdline; | |
str = strstr(str, "fb0base="); | |
if (str != NULL) { | |
str += 8; | |
pdata_fb[0].res_base[0] = | |
simple_strtol(str, &str, 16); | |
} | |
/* GPU reserved memory */ | |
str = t->u.cmdline.cmdline; | |
str = strstr(str, "gpumem="); | |
if (str != NULL) { | |
str += 7; | |
imx6q_gpu_pdata.reserved_mem_size = memparse(str, &str); | |
} | |
break; | |
} | |
} | |
} | |
| |
static void __init mx6q_sabresd_reserve(void) <------------- + |
{ |
phys_addr_t phys; |
int i, fb0_reserved = 0, fb_array_size; |
|
/* |
* Reserve primary framebuffer memory if its base address |
* is set by kernel command line. |
*/ |
// fb0 |
fb_array_size = ARRAY_SIZE(sabresd_fb_data); |
if (fb_array_size > 0 && sabresd_fb_data[0].res_base[0] && |
sabresd_fb_data[0].res_size[0]) { |
//将framebuffer的数据保留，放在memblock.reverse中
memblock_reserve(sabresd_fb_data[0].res_base[0], |
sabresd_fb_data[0].res_size[0]); |
//将原来的内存中memblock.memory中删除
memblock_remove(sabresd_fb_data[0].res_base[0], |
sabresd_fb_data[0].res_size[0]); |
sabresd_fb_data[0].late_init = true; |
ipu_data[ldb_data.ipu_id].bypass_reset = true; |
fb0_reserved = 1; |
} |
// 对于fb_arrary剩下的元素
for (i = fb0_reserved; i < fb_array_size; i++) |
if (sabresd_fb_data[i].res_size[0]) { |
/* Reserve for other background buffer. */ |
//申请空间，保留到memblock.reverse中
phys = memblock_alloc(sabresd_fb_data[i].res_size[0], |
SZ_4K); |
//将memblock.memory中一块大小的空间删除，因为已经申请，并放入memblock.reverse中
memblock_remove(phys, sabresd_fb_data[i].res_size[0]); |
sabresd_fb_data[i].res_base[0] = phys; --------------+ |
} | |
| |
#ifdef CONFIG_ANDROID_RAM_CONSOLE | |
//保留128K的内存到memblock.reserve，4K对齐 | |
phys = memblock_alloc_base(SZ_128K, SZ_4K, SZ_1G); | |
memblock_remove(phys, SZ_128K); | |
memblock_free(phys, SZ_128K); | |
ram_console_resource.start = phys; | |
ram_console_resource.end = phys + SZ_128K - 1; | |
#endif | |
| |
#if defined(CONFIG_MXC_GPU_VIV) || defined(CONFIG_MXC_GPU_VIV_MODULE) | |
//保留 内存到memblock.reserve，4K对齐
if (imx6q_gpu_pdata.reserved_mem_size) { | |
phys = memblock_alloc_base(imx6q_gpu_pdata.reserved_mem_size, | |
SZ_4K, SZ_1G); | |
memblock_remove(phys, imx6q_gpu_pdata.reserved_mem_size); | |
imx6q_gpu_pdata.reserved_mem_base = phys; | |
} | |
#endif | |
| |
#if defined(CONFIG_ION) | |
if (imx_ion_data.heaps[0].size) { | |
phys = memblock_alloc(imx_ion_data.heaps[0].size, SZ_4K); | |
memblock_remove(phys, imx_ion_data.heaps[0].size); | |
imx_ion_data.heaps[0].base = phys; | |
} | |
#endif | |
} | |
| |
//#define IPU_PIX_FMT_BIT24 | |
static struct ipuv3_fb_platform_data sabresd_fb_data[] = { <--------+ |
{ /*fb0*/ |
.disp_dev = "ldb", |
#ifdef IPU_PIX_FMT_BIT24 |
.interface_pix_fmt = IPU_PIX_FMT_RGB24, |
.default_bpp = 24, |
#else |
.interface_pix_fmt = IPU_PIX_FMT_RGB666, |
.default_bpp = 16, |
#endif |
.mode_str = "LDB-XGA", |
.int_clk = false, |
.late_init = false, |
}, |
{ |
.disp_dev = "hdmi", |
.interface_pix_fmt = IPU_PIX_FMT_RGB24, |
.mode_str = "1920x1080M@60", |
.default_bpp = 32, |
.int_clk = false, |
.late_init = false, |
}, |
{ |
.disp_dev = "ldb", |
#ifdef IPU_PIX_FMT_BIT24 |
.interface_pix_fmt = IPU_PIX_FMT_RGB24, |
.default_bpp = 24, |
#else |
.interface_pix_fmt = IPU_PIX_FMT_RGB666, |
.default_bpp = 16, |
#endif |
.mode_str = "LDB-XGA", |
.int_clk = false, |
.late_init = false, |
}, |
}; |
|
mm/memblock.c |
long __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size) |
{ |
struct memblock_type *_rgn = &memblock.reserved; |
|
BUG_ON(0 == size); |
|
return memblock_add_region(_rgn, base, size); |
} |
|
long __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size) |
{ |
return __memblock_remove(&memblock.memory, base, size); |
} |
|
phys_addr_t __init memblock_alloc(phys_addr_t size, phys_addr_t align) |
{ |
return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); |
} |
|
static void __init mx6_sabresd_board_init(void) <----------------+
{
.....
imx6q_add_ipuv3(0, &ipu_data[0]);
if (cpu_is_mx6q()) {
imx6q_add_ipuv3(1, &ipu_data[1]); <------+
for (i = 0; i < 4 && i < ARRAY_SIZE(sabresd_fb_data); i++) |
imx6q_add_ipuv3fb(i, &sabresd_fb_data[i]); |
} else |
for (i = 0; i < 2 && i < ARRAY_SIZE(sabresd_fb_data); i++) |
imx6q_add_ipuv3fb(i, &sabresd_fb_data[i]); |
...... |
} |
|
extern const struct imx_ipuv3_data imx6q_ipuv3_data[] __initconst; <------+
#define imx6q_add_ipuv3(id, pdata) imx_add_ipuv3(id, &imx6q_ipuv3_data[id], pdata) |
#define imx6q_add_ipuv3fb(id, pdata) imx_add_ipuv3_fb(id, pdata) |
|
struct platform_device *__init imx_add_ipuv3_fb( <-------------+
const int id,
const struct ipuv3_fb_platform_data *pdata)
{
if (pdata->res_size[0] > 0) {
struct resource res[] = {
{
.start = pdata->res_base[0],
.end = pdata->res_base[0] + pdata->res_size[0] - 1,
.flags = IORESOURCE_MEM,
}, {
.start = 0,
.end = 0,
.flags = IORESOURCE_MEM,
},
};
if (pdata->res_size[1] > 0) {
res[1].start = pdata->res_base[1];
res[1].end = pdata->res_base[1] +
pdata->res_size[1] - 1;
}
return imx_add_platform_device_dmamask("mxc_sdc_fb",
id, res, ARRAY_SIZE(res), pdata,
sizeof(*pdata), DMA_BIT_MASK(32));
} else
return imx_add_platform_device_dmamask("mxc_sdc_fb", id,
NULL, 0, pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
驱动注册
kernel/video/mxc/mxc_ipuv3_fb.c
int __init mxcfb_init(void)
{
return platform_driver_register(&mxcfb_driver); ------+
} |
|
static struct platform_driver mxcfb_driver = { <----+
.driver = {
.name = MXCFB_NAME,
},
.probe = mxcfb_probe, -------------------+
.remove = mxcfb_remove, |
.suspend = mxcfb_suspend, |
.resume = mxcfb_resume, |
}; |
#define MXCFB_NAME "mxc_sdc_fb" |
|
|
static int mxcfb_probe(struct platform_device *pdev) <--+
{
struct ipuv3_fb_platform_data *plat_data = pdev->dev.platform_data;
struct fb_info *fbi;
struct mxcfb_info *mxcfbi;
struct resource *res;
struct device *disp_dev;
char buf[32];
int ret = 0;
+--------------------------------+
/* Initialize FB structures */ | |
fbi = mxcfb_init_fbinfo(&pdev->dev, &mxcfb_ops); |
if (!fbi) { |
ret = -ENOMEM; |
goto init_fbinfo_failed; |
} |
|
ret = mxcfb_option_setup(pdev, fbi); ----------------------------+
if (ret) | |
goto get_fb_option_failed; | |
| |
mxcfbi = (struct mxcfb_info *)fbi->par; | |
spin_lock_init(&mxcfbi->lock); | |
mxcfbi->fbi = fbi; | |
mxcfbi->ipu_int_clk = plat_data->int_clk; | |
mxcfbi->late_init = plat_data->late_init; | |
mxcfbi->first_set_par = true; | |
mxcfbi->panel_width_mm = plat_data->panel_width_mm; | |
mxcfbi->panel_height_mm = plat_data->panel_height_mm; | |
| |
ret = mxcfb_dispdrv_init(pdev, fbi); -----------------------------------+
if (ret < 0) | | |
goto init_dispdrv_failed; | | |
| | |
ret = ipu_test_set_usage(mxcfbi->ipu_id, mxcfbi->ipu_di); -------------------------+
if (ret < 0) { | | | |
dev_err(&pdev->dev, "ipu%d-di%d already in use\n", | | | |
mxcfbi->ipu_id, mxcfbi->ipu_di); | | | |
goto ipu_in_busy; | | | |
} | | | |
| | | |
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | | | |
if (res && res->start && res->end) { | | | |
fbi->fix.smem_len = res->end - res->start + 1; | | | |
fbi->fix.smem_start = res->start; | | | |
fbi->screen_base = ioremap(fbi->fix.smem_start, fbi->fix.smem_len); | | | |
/* Do not clear the fb content drawn in bootloader. */ | | | |
if (!mxcfbi->late_init) | | | |
memset(fbi->screen_base, 0, fbi->fix.smem_len); | | | |
} | | | |
| | | |
mxcfbi->ipu = ipu_get_soc(mxcfbi->ipu_id); | | | |
if (IS_ERR(mxcfbi->ipu)) { | | | |
ret = -ENODEV; | | | |
goto get_ipu_failed; | | | |
} | | | |
| | | |
/* first user uses DP with alpha feature */ | | | |
if (!g_dp_in_use[mxcfbi->ipu_id]) { | | | |
mxcfbi->ipu_ch_irq = IPU_IRQ_BG_SYNC_EOF; | | | |
mxcfbi->ipu_ch_nf_irq = IPU_IRQ_BG_SYNC_NFACK; | | | |
mxcfbi->ipu_alp_ch_irq = IPU_IRQ_BG_ALPHA_SYNC_EOF; | | | |
mxcfbi->ipu_vsync_pre_irq = mxcfbi->ipu_di ? | | | |
IPU_IRQ_VSYNC_PRE_1 : | | | |
IPU_IRQ_VSYNC_PRE_0; | | | |
mxcfbi->ipu_ch = MEM_BG_SYNC; | | | |
/* Unblank the primary fb only by default */ | | | |
if (pdev->id == 0) | | | |
mxcfbi->cur_blank = mxcfbi->next_blank = FB_BLANK_UNBLANK; | | | |
else | | | |
mxcfbi->cur_blank = mxcfbi->next_blank = FB_BLANK_POWERDOWN; | | | |
| | | |
ret = mxcfb_register(fbi); ------------------------------------------------+
if (ret < 0) | | | | |
goto mxcfb_register_failed; | | | | |
| | | | |
ipu_disp_set_global_alpha(mxcfbi->ipu, mxcfbi->ipu_ch, | | | | |
true, 0x80); | | | | |
ipu_disp_set_color_key(mxcfbi->ipu, mxcfbi->ipu_ch, false, 0); | | | | |
| | | | |
res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | | | | |
ret = mxcfb_setup_overlay(pdev, fbi, res); | | | | |
| | | | |
if (ret < 0) { | | | | |
mxcfb_unregister(fbi); | | | | |
goto mxcfb_setupoverlay_failed; | | | | |
} | | | | |
| | | | |
g_dp_in_use[mxcfbi->ipu_id] = true; | | | | |
| | | | |
ret = device_create_file(mxcfbi->ovfbi->dev, | | | | |
&dev_attr_fsl_disp_property); | | | | |
if (ret) | | | | |
dev_err(mxcfbi->ovfbi->dev, "Error %d on creating " | | | | |
"file for disp property\n", | | | | |
ret); | | | | |
| | | | |
ret = device_create_file(mxcfbi->ovfbi->dev, | | | | |
&dev_attr_fsl_disp_dev_property); | | | | |
if (ret) | | | | |
dev_err(mxcfbi->ovfbi->dev, "Error %d on creating " | | | | |
"file for disp device " | | | | |
"propety\n", ret); | | | | |
} else { | | | | |
mxcfbi->ipu_ch_irq = IPU_IRQ_DC_SYNC_EOF; | | | | |
mxcfbi->ipu_ch_nf_irq = IPU_IRQ_DC_SYNC_NFACK; | | | | |
mxcfbi->ipu_alp_ch_irq = -1; | | | | |
mxcfbi->ipu_vsync_pre_irq = mxcfbi->ipu_di ? | | | | |
IPU_IRQ_VSYNC_PRE_1 : | | | | |
IPU_IRQ_VSYNC_PRE_0; | | | | |
mxcfbi->ipu_ch = MEM_DC_SYNC; | | | | |
mxcfbi->cur_blank = mxcfbi->next_blank = FB_BLANK_POWERDOWN; | | | | |
| | | | |
ret = mxcfb_register(fbi); | | | | |
if (ret < 0) | | | | |
goto mxcfb_register_failed; | | | | |
} | | | | |
| | | | |
platform_set_drvdata(pdev, fbi); | | | | |
| | | | |
ret = device_create_file(fbi->dev, &dev_attr_fsl_disp_property); | | | | |
if (ret) | | | | |
dev_err(&pdev->dev, "Error %d on creating file for disp " | | | | |
"property\n", ret); | | | | |
| | | | |
ret = device_create_file(fbi->dev, &dev_attr_fsl_disp_dev_property); | | | | |
if (ret) | | | | |
dev_err(&pdev->dev, "Error %d on creating file for disp " | | | | |
" device propety\n", ret); | | | | |
| | | | |
disp_dev = mxc_dispdrv_getdev(mxcfbi->dispdrv); | | | | |
if (disp_dev) { | | | | |
ret = sysfs_create_link(&fbi->dev->kobj, | | | | |
&disp_dev->kobj, "disp_dev"); | | | | |
if (ret) | | | | |
dev_err(&pdev->dev, | | | | |
"Error %d on creating file\n", ret); | | | | |
} | | | | |
| | | | |
INIT_WORK(&mxcfbi->vsync_pre_work, mxcfb_vsync_pre_work); | | | | |
| | | | |
snprintf(buf, sizeof(buf), "mxcfb%d-vsync-pre", fbi->node); | | | | |
mxcfbi->vsync_pre_queue = create_singlethread_workqueue(buf); | | | | |
if (mxcfbi->vsync_pre_queue == NULL) { | | | | |
dev_err(fbi->device, | | | | |
"Failed to alloc vsync-pre workqueue\n"); | | | | |
ret = -ENOMEM; | | | | |
goto workqueue_alloc_failed; | | | | |
} | | | | |
| | | | |
#ifdef CONFIG_HAS_EARLYSUSPEND | | | | |
mxcfbi->fbdrv_earlysuspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB; | | | | |
mxcfbi->fbdrv_earlysuspend.suspend = mxcfb_early_suspend; | | | | |
mxcfbi->fbdrv_earlysuspend.resume = mxcfb_later_resume; | | | | |
mxcfbi->fbdrv_earlysuspend.data = pdev; | | | | |
register_early_suspend(&mxcfbi->fbdrv_earlysuspend); | | | | |
#endif | | | | |
| | | | |
#ifdef CONFIG_LOGO | | | | |
fb_prepare_logo(fbi, 0); | | | | |
fb_show_logo(fbi, 0); | | | | |
#endif | | | | |
/* | | | | |
* Disable HannStar touch panel CABC function, | | | | |
* this function turns the panel's backlight automatically | | | | |
* according to the content shown on the panel which | | | | |
* may cause annoying unstable backlight issue. | | | | |
* | | | | |
* zengjf 2015-10-8 this also has down in uboot | | | | |
*/ | | | | |
/* | | | | |
gpio_request(SABRESD_CABC_EN1, "cabc-en1"); | | | | |
gpio_direction_output(SABRESD_CABC_EN1, 1); | | | | |
gpio_request(SABRESD_CABC_EN0, "cabc-en0"); | | | | |
gpio_direction_output(SABRESD_CABC_EN0, 1); | | | | |
*/ | | | | |
| | | | |
return 0; | | | | |
| | | | |
workqueue_alloc_failed: | | | | |
mxcfb_setupoverlay_failed: | | | | |
mxcfb_register_failed: | | | | |
get_ipu_failed: | | | | |
ipu_clear_usage(mxcfbi->ipu_id, mxcfbi->ipu_di); | | | | |
ipu_in_busy: | | | | |
init_dispdrv_failed: | | | | |
fb_dealloc_cmap(&fbi->cmap); | | | | |
framebuffer_release(fbi); | | | | |
get_fb_option_failed: | | | | |
init_fbinfo_failed: | | | | |
return ret; | | | | |
} | | | | |
| | | | |
static struct fb_ops mxcfb_ops = { <------------------+ | | | |
.owner = THIS_MODULE, | | | |
.fb_set_par = mxcfb_set_par, | | | |
.fb_check_var = mxcfb_check_var, | | | |
.fb_setcolreg = mxcfb_setcolreg, | | | |
.fb_pan_display = mxcfb_pan_display, | | | |
.fb_ioctl = mxcfb_ioctl, | | | |
.fb_mmap = mxcfb_mmap, | | | |
.fb_fillrect = cfb_fillrect, | | | |
.fb_copyarea = cfb_copyarea, | | | |
.fb_imageblit = cfb_imageblit, | | | |
.fb_blank = mxcfb_blank, | | | |
}; | | | |
| | | |
| | | |
/* | | | |
* Parse user specified options (`video=trident:') | | | |
* example: | | | |
* video=mxcfb0:dev=lcd,800x480M-16@55,if=RGB565,bpp=16,noaccel | | | |
* video=mxcfb0:dev=lcd,800x480M-16@55,if=RGB565,fbpix=RGB565 | | | |
*/ | | | |
static int mxcfb_option_setup(struct platform_device *pdev, struct fb_info *fbi) <-+ | | |
{ | | |
struct ipuv3_fb_platform_data *pdata = pdev->dev.platform_data; | | |
char *options, *opt, *fb_mode_str = NULL; | | |
char name[] = "mxcfb0"; | | |
uint32_t fb_pix_fmt = 0; | | |
| | |
name[5] += pdev->id; | | |
if (fb_get_options(name, &options)) { -------------+ | | |
dev_err(&pdev->dev, "Can't get fb option for %s!\n", name); | | | |
return -ENODEV; | | | |
} | | | |
| | | |
if (!options || !*options) | | | |
return 0; | | | |
| | | |
while ((opt = strsep(&options, ",")) != NULL) { | | | |
if (!*opt) | | | |
continue; | | | |
| | | |
if (!strncmp(opt, "dev=", 4)) { | | | |
memcpy(pdata->disp_dev, opt + 4, strlen(opt) - 4); | | | |
pdata->disp_dev[strlen(opt) - 4] = '\0'; | | | |
} else if (!strncmp(opt, "if=", 3)) { | | | |
if (!strncmp(opt+3, "RGB24", 5)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_RGB24; | | | |
else if (!strncmp(opt+3, "BGR24", 5)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_BGR24; | | | |
else if (!strncmp(opt+3, "GBR24", 5)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_GBR24; | | | |
else if (!strncmp(opt+3, "RGB565", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_RGB565; | | | |
else if (!strncmp(opt+3, "RGB666", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_RGB666; | | | |
else if (!strncmp(opt+3, "YUV444", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_YUV444; | | | |
else if (!strncmp(opt+3, "LVDS666", 7)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_LVDS666; | | | |
else if (!strncmp(opt+3, "YUYV16", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_YUYV; | | | |
else if (!strncmp(opt+3, "UYVY16", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_UYVY; | | | |
else if (!strncmp(opt+3, "YVYU16", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_YVYU; | | | |
else if (!strncmp(opt+3, "VYUY16", 6)) | | | |
pdata->interface_pix_fmt = IPU_PIX_FMT_VYUY; | | | |
} else if (!strncmp(opt, "fbpix=", 6)) { | | | |
if (!strncmp(opt+6, "RGB24", 5)) | | | |
fb_pix_fmt = IPU_PIX_FMT_RGB24; | | | |
else if (!strncmp(opt+6, "BGR24", 5)) | | | |
fb_pix_fmt = IPU_PIX_FMT_BGR24; | | | |
else if (!strncmp(opt+6, "RGB32", 5)) | | | |
fb_pix_fmt = IPU_PIX_FMT_RGB32; | | | |
else if (!strncmp(opt+6, "BGR32", 5)) | | | |
fb_pix_fmt = IPU_PIX_FMT_BGR32; | | | |
else if (!strncmp(opt+6, "ABGR32", 6)) | | | |
fb_pix_fmt = IPU_PIX_FMT_ABGR32; | | | |
else if (!strncmp(opt+6, "RGB565", 6)) | | | |
fb_pix_fmt = IPU_PIX_FMT_RGB565; | | | |
| | | |
if (fb_pix_fmt) { | | | |
pixfmt_to_var(fb_pix_fmt, &fbi->var); | | | |
pdata->default_bpp = | | | |
fbi->var.bits_per_pixel; | | | |
} | | | |
} else if (!strncmp(opt, "int_clk", 7)) { | | | |
pdata->int_clk = true; | | | |
continue; | | | |
} else if (!strncmp(opt, "bpp=", 4)) { | | | |
/* bpp setting cannot overwirte fbpix setting */ | | | |
if (fb_pix_fmt) | | | |
continue; | | | |
| | | |
pdata->default_bpp = | | | |
simple_strtoul(opt + 4, NULL, 0); | | | |
| | | |
fb_pix_fmt = bpp_to_pixfmt(pdata->default_bpp); | | | |
if (fb_pix_fmt) | | | |
pixfmt_to_var(fb_pix_fmt, &fbi->var); | | | |
} else | | | |
fb_mode_str = opt; | | | |
} | | | |
| | | |
if (fb_mode_str) | | | |
pdata->mode_str = fb_mode_str; | | | |
| | | |
return 0; | | | |
} | | | |
| | | |
drivers/video/fbmem.c | | | |
/** | | | |
* fb_get_options - get kernel boot parameters | | | |
* @name: framebuffer name as it would appear in | | | |
* the boot parameter line | | | |
* (video=<name>:<options>) | | | |
* @option: the option will be stored here | | | |
* | | | |
* NOTE: Needed to maintain backwards compatibility | | | |
*/ | | | |
// | | | |
int fb_get_options(char *name, char **option) <--------+ | | |
{ | | |
char *opt, *options = NULL; | | |
int retval = 0; | | |
int name_len = strlen(name), i; | | |
| | |
if (name_len && ofonly && strncmp(name, "offb", 4)) | | |
retval = 1; | | |
| | |
if (name_len && !retval) { | | |
for (i = 0; i < FB_MAX; i++) { | | |
if (video_options[i] == NULL) | | |
continue; | | |
if (!video_options[i][0]) | | |
continue; | | |
opt = video_options[i]; | | |
if (!strncmp(name, opt, name_len) && | | |
opt[name_len] == ':') | | |
options = opt + name_len + 1; | | |
} | | |
} | | |
if (options && !strncmp(options, "off", 3)) | | |
retval = 1; | | |
| | |
if (option) | | |
*option = options; | | |
| | |
return retval; | | |
} | | |
| | |
static int mxcfb_dispdrv_init(struct platform_device *pdev, <---------------+ | |
struct fb_info *fbi) | |
{ | |
struct ipuv3_fb_platform_data *plat_data = pdev->dev.platform_data; | |
struct mxcfb_info *mxcfbi = (struct mxcfb_info *)fbi->par; | |
struct mxc_dispdrv_setting setting; | |
char disp_dev[32], *default_dev = "lcd"; | |
int ret = 0; | |
| |
setting.if_fmt = plat_data->interface_pix_fmt; | |
setting.dft_mode_str = plat_data->mode_str; | |
setting.default_bpp = plat_data->default_bpp; | |
if (!setting.default_bpp) | |
setting.default_bpp = 16; | |
setting.fbi = fbi; | |
if (!strlen(plat_data->disp_dev)) { | |
memcpy(disp_dev, default_dev, strlen(default_dev)); | |
disp_dev[strlen(default_dev)] = '\0'; | |
} else { | |
memcpy(disp_dev, plat_data->disp_dev, | |
strlen(plat_data->disp_dev)); | |
disp_dev[strlen(plat_data->disp_dev)] = '\0'; | |
} | |
| |
dev_info(&pdev->dev, "register mxc display driver %s\n", disp_dev); | |
| |
mxcfbi->dispdrv = mxc_dispdrv_gethandle(disp_dev, &setting); | |
if (IS_ERR(mxcfbi->dispdrv)) { | |
ret = PTR_ERR(mxcfbi->dispdrv); | |
dev_err(&pdev->dev, "NO mxc display driver found!\n"); | |
return ret; | |
} else { | |
/* fix-up */ | |
mxcfbi->ipu_di_pix_fmt = setting.if_fmt; | |
mxcfbi->default_bpp = setting.default_bpp; | |
| |
/* setting */ | |
mxcfbi->ipu_id = setting.dev_id; | |
mxcfbi->ipu_di = setting.disp_id; | |
} | |
| |
return ret; | |
} | |
| |
static bool ipu_usage[2][2]; | |
static int ipu_test_set_usage(int ipu, int di) <--------------------------+ |
{ |
if (ipu_usage[ipu][di]) |
return -EBUSY; |
else |
ipu_usage[ipu][di] = true; |
return 0; |
} |
|
static int mxcfb_register(struct fb_info *fbi) <-----------------------------+
{
struct mxcfb_info *mxcfbi = (struct mxcfb_info *)fbi->par;
struct fb_videomode m;
int ret = 0;
char bg0_id[] = "DISP3 BG";
char bg1_id[] = "DISP3 BG - DI1";
char fg_id[] = "DISP3 FG";
if (mxcfbi->ipu_di == 0) {
bg0_id[4] += mxcfbi->ipu_id;
strcpy(fbi->fix.id, bg0_id);
} else if (mxcfbi->ipu_di == 1) {
bg1_id[4] += mxcfbi->ipu_id;
strcpy(fbi->fix.id, bg1_id);
} else { /* Overlay */
fg_id[4] += mxcfbi->ipu_id;
strcpy(fbi->fix.id, fg_id);
}
mxcfb_check_var(&fbi->var, fbi);
mxcfb_set_fix(fbi);
/* Added first mode to fbi modelist. */
if (!fbi->modelist.next || !fbi->modelist.prev)
INIT_LIST_HEAD(&fbi->modelist);
fb_var_to_videomode(&m, &fbi->var);
fb_add_videomode(&m, &fbi->modelist);
if (ipu_request_irq(mxcfbi->ipu, mxcfbi->ipu_ch_irq,
mxcfb_irq_handler, IPU_IRQF_ONESHOT, MXCFB_NAME, fbi) != 0) {
dev_err(fbi->device, "Error registering EOF irq handler.\n");
ret = -EBUSY;
goto err0;
}
ipu_disable_irq(mxcfbi->ipu, mxcfbi->ipu_ch_irq);
if (ipu_request_irq(mxcfbi->ipu, mxcfbi->ipu_ch_nf_irq,
mxcfb_nf_irq_handler, IPU_IRQF_ONESHOT, MXCFB_NAME, fbi) != 0) {
dev_err(fbi->device, "Error registering NFACK irq handler.\n");
ret = -EBUSY;
goto err1;
}
ipu_disable_irq(mxcfbi->ipu, mxcfbi->ipu_ch_nf_irq);
if (mxcfbi->ipu_vsync_pre_irq != -1) {
if (ipu_request_irq(mxcfbi->ipu, mxcfbi->ipu_vsync_pre_irq,
mxcfb_vsync_pre_irq_handler, 0,
MXCFB_NAME, fbi) != 0) {
dev_err(fbi->device, "Error registering VSYNC irq "
"handler.\n");
ret = -EBUSY;
goto err2;
}
ipu_disable_irq(mxcfbi->ipu, mxcfbi->ipu_vsync_pre_irq);
}
if (mxcfbi->ipu_alp_ch_irq != -1)
if (ipu_request_irq(mxcfbi->ipu, mxcfbi->ipu_alp_ch_irq,
mxcfb_alpha_irq_handler, IPU_IRQF_ONESHOT,
MXCFB_NAME, fbi) != 0) {
dev_err(fbi->device, "Error registering alpha irq "
"handler.\n");
ret = -EBUSY;
goto err3;
}
if (!mxcfbi->late_init) {
fbi->var.activate |= FB_ACTIVATE_FORCE;
console_lock();
fbi->flags |= FBINFO_MISC_USEREVENT;
ret = fb_set_var(fbi, &fbi->var);
fbi->flags &= ~FBINFO_MISC_USEREVENT;
console_unlock();
if (ret < 0) {
dev_err(fbi->device, "Error fb_set_var ret:%d\n", ret);
goto err4;
}
if (mxcfbi->next_blank == FB_BLANK_UNBLANK) {
console_lock();
ret = fb_blank(fbi, FB_BLANK_UNBLANK);
console_unlock();
if (ret < 0) {
dev_err(fbi->device,
"Error fb_blank ret:%d\n", ret);
goto err5;
}
}
} else {
/*
* Setup the channel again though bootloader
* has done this, then set_par() can stop the
* channel neatly and re-initialize it .
*/
if (mxcfbi->next_blank == FB_BLANK_UNBLANK) {
console_lock();
_setup_disp_channel1(fbi);
ipu_enable_channel(mxcfbi->ipu, mxcfbi->ipu_ch);
console_unlock();
}
}
ret = register_framebuffer(fbi); -----------------+
if (ret < 0) |
goto err6; |
|
return ret; |
err6: |
if (mxcfbi->next_blank == FB_BLANK_UNBLANK) { |
console_lock(); |
if (!mxcfbi->late_init) |
fb_blank(fbi, FB_BLANK_POWERDOWN); |
else { |
ipu_disable_channel(mxcfbi->ipu, mxcfbi->ipu_ch, |
true); |
ipu_uninit_channel(mxcfbi->ipu, mxcfbi->ipu_ch); |
} |
console_unlock(); |
} |
err5: |
err4: |
if (mxcfbi->ipu_alp_ch_irq != -1) |
ipu_free_irq(mxcfbi->ipu, mxcfbi->ipu_alp_ch_irq, fbi); |
err3: |
if (mxcfbi->ipu_vsync_pre_irq != -1) |
ipu_free_irq(mxcfbi->ipu, mxcfbi->ipu_vsync_pre_irq, fbi); |
err2: |
ipu_free_irq(mxcfbi->ipu, mxcfbi->ipu_ch_nf_irq, fbi); |
err1: |
ipu_free_irq(mxcfbi->ipu, mxcfbi->ipu_ch_irq, fbi); |
err0: |
return ret; |
} |
|
drivers/video/fbmem.c |
register_framebuffer(struct fb_info *fb_info) <-------------+
{
int ret;
mutex_lock(®istration_lock);
ret = do_register_framebuffer(fb_info); -----+
mutex_unlock(®istration_lock); |
|
return ret; |
} |
|
static int do_register_framebuffer(struct fb_info *fb_info) <----+
{
int i;
struct fb_event event;
struct fb_videomode mode;
if (fb_check_foreignness(fb_info))
return -ENOSYS;
do_remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
fb_is_primary_device(fb_info));
if (num_registered_fb == FB_MAX)
return -ENXIO;
num_registered_fb++;
for (i = 0 ; i < FB_MAX; i++)
if (!registered_fb[i])
break;
fb_info->node = i;
atomic_set(&fb_info->count, 1);
mutex_init(&fb_info->lock);
mutex_init(&fb_info->mm_lock);
fb_info->dev = device_create(fb_class, fb_info->device,
MKDEV(FB_MAJOR, i), NULL, "fb%d", i); --------------------------->> // 设备节点创建 /dev/fb0
if (IS_ERR(fb_info->dev)) {
/* Not fatal */
printk(KERN_WARNING "Unable to create device for framebuffer %d; errno = %ld\n", i, PTR_ERR(fb_info->dev));
fb_info->dev = NULL;
} else
fb_init_device(fb_info);
if (fb_info->pixmap.addr == NULL) {
fb_info->pixmap.addr = kmalloc(FBPIXMAPSIZE, GFP_KERNEL);
if (fb_info->pixmap.addr) {
fb_info->pixmap.size = FBPIXMAPSIZE;
fb_info->pixmap.buf_align = 1;
fb_info->pixmap.scan_align = 1;
fb_info->pixmap.access_align = 32;
fb_info->pixmap.flags = FB_PIXMAP_DEFAULT;
}
}
fb_info->pixmap.offset = 0;
if (!fb_info->pixmap.blit_x)
fb_info->pixmap.blit_x = ~(u32)0;
if (!fb_info->pixmap.blit_y)
fb_info->pixmap.blit_y = ~(u32)0;
if (!fb_info->modelist.prev || !fb_info->modelist.next)
INIT_LIST_HEAD(&fb_info->modelist);
fb_var_to_videomode(&mode, &fb_info->var);
fb_add_videomode(&mode, &fb_info->modelist);
registered_fb[i] = fb_info;
event.info = fb_info;
if (!lock_fb_info(fb_info))
return -ENODEV;
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
unlock_fb_info(fb_info);
return 0;
}
